Hygroscopic Water Retention and Physio-Chemical Properties of Three In-House Produced Biochars from Different Feedstock Types: Implications on Substrate Amendment in Green Infrastructure

Recent studies have proposed usage of biochar as a substrate amendment in green infrastructure, such as green roofs and bio-filtration units. However, understanding of the variation in physio-chemical properties of biochar due to the production process and feedstock is still lacking. The present study investigated the effects of pyrolysis temperature and feedstocks on the hygroscopic water content and physio-chemical properties of biochar. Biochars were produced from three feedstock types, invasive vegetation (i.e., water hyacinth), non-invasive vegetation (i.e., wood) and one animal waste (i.e., chicken manure). Biochar was produced at two different pyrolysis temperatures (i.e., 300 °C and 600 °C). Scanning electron microscopy + energy dispersive spectrometry (SEM + EDS), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and Brunauer-Emmett-Teller (BET) were performed on all samples to analyze the surface morphology, pore size, element content, functional groups, and chemical bonds. Relative humidity was adjusted to reflect the biochar’s hygroscopic property by measuring the maximum moisture content at the sample equilibrium state. The characterization reveals that the lowest carbon content (42.78%) was found at 300 °C for water hyacinth biochar (WHB). The highest carbon content (92.14%) was found at 600 °C for wood biochar (WB). As the pyrolysis temperature increased, the mean pore volume (from 0.03 to 0.18 cm3/g) and diameter (from 8.40 to 10.33 nm) of the WHB increased. However, the pore diameter of chicken manure (CB) decreased (from 9.23 nm to 7.53 nm) under an increase in pyrolysis temperature. For a given pyrolysis temperature, the hygroscopicity of WHB was highest among all biochars. With an increase in pyrolysis temperature, the hygroscopicity of biochars changed differently. The hygroscopicity of WHB decreased from 82.41% to 44.33% with an increase of pyrolysis temperature. However, the hygroscopicity of CMB and WB remained unchanged. This study suggests that production process of biochars need to be considered for appropriate selection as substrate material in green infrastructure. Further, it promotes the establishment of commercial production of biochar for usage in green infrastructure.

Calcium Carbonate Can Be Used to Manage Soilless Substrate pH for Blueberry Production

Blueberry (Vacciniumcorymbosum interspecific hybrids) production in soilless substrates is becoming increasingly popular. Soilless substrates have low pH buffering capacity. Blueberry plants preferentially take up ammonium, which acidifies the rhizosphere. Consequently, soilless substrates where blueberry plants are grown exhibit a tendency to get acidified over time. Agricultural lime (CaCO3) is commonly used to raise soil and substrate pH in other crops, but it is rarely used in blueberry cultivation. We hypothesized that substrate amendment with low rates of agricultural lime increases substrate pH buffering capacity and provides nutritional cations that can benefit blueberry plants. We tested this hypothesis in a greenhouse experiment with ‘Emerald’ southern highbush blueberry plants grown in rhizoboxes filled with a 3:1 mix of coconut coir and perlite. We found that substrate amendment with CaCO3 did not cause high pH stress. This amendment maintained substrate pH between 5.5 and 6.5 and provided Ca and Mg for plant uptake. When blueberry plants were grown in CaCO3-amended substrate and fertigated with low pH nutrient solution (pH 4.5), they exhibited greater biomass accumulation than plants grown in unamended substrates. These results suggest that low rates of CaCO3 could be useful for blueberry cultivation in soilless substrates.

Activity-based cell sorting reveals responses of uncultured archaea and bacteria to substrate amendment

Metagenomic studies have revolutionized our understanding of the metabolic potential of uncultured microorganisms in various ecosystems. However, many of these genomic predictions have yet to be experimentally tested, and the functional expression of genomic potential often remains unaddressed. In order to obtain a more thorough understanding of cell physiology, novel techniques capable of testing microbial metabolism under close to in situ conditions must be developed. Here, we provide a benchmark study to demonstrate that bioorthogonal non-canonical amino acid tagging (BONCAT) in combination with fluorescence-activated cell sorting (FACS) and 16S rRNA gene sequencing can be used to identify anabolically active members of a microbial community incubated in the presence of various growth substrates or under changing physicochemical conditions. We applied this approach to a hot spring sediment microbiome from Yellowstone National Park (Wyoming, USA) and identified several microbes that changed their activity levels in response to substrate addition, including uncultured members of the phyla Thaumarchaeota, Acidobacteria, and Fervidibacteria. Because shifts in activity in response to substrate amendment or headspace changes are indicative of microbial preferences for particular growth conditions, results from this and future BONCAT-FACS studies could inform the development of cultivation media to specifically enrich uncultured microbes. Most importantly, BONCAT-FACS is capable of providing information on the physiology of uncultured organisms at as close to in situ conditions as experimentally possible.

Fiche technique de l’impact de l’amendement du substrat en poudre de coquille d’œuf de poule sur la reproduction de Archachatina marginata (Swainson, 1821)

This study consists in looking for an improvement of Archachatina margina reproductions performances by amendment of the breeding substrates. As a result, five types of substrate were prepared by soil amendment at different rates (0%, 10%, 20%, 30% et 40%) with chicken egg shell powder. On these substrates, snails were raised from spat stage until they were laid. Reproductive parameters such as: age of first laying, the number of annual laying per animal, the number of eggs per laying on the different substrates were recorded. Overall, snail laying performances improved with increasing rate of substrate amendment. However, beyond a rate of 20%, the weight of eggs laid began to decline. The chicken egg shell powder is suitable for the amendment of the breeding substrate of snails Archachatina marginata in view of an improvement in their reproductive performance. The rate of amendment recommended to this effect is 20%.