Entropy Effects in Intermolecular Associations of Crown-Ethers and Cyclodextrins with Amino Acids in Aqueous and in Non-Aqueous Media

The analysis of the ratios of entropy and enthalpy characteristics and their contributions to the change in the Gibbs energy of intermolecular interactions of crown ethers and cyclodextrins with amino acids is carried out. Two different types of macrocycles were chosen for examination: crown ethers with a hydrophilic interior and cyclodextrins with a hydrophobic inner cavity and a hydrophilic exterior. The thermodynamics of complex formation of crown ethers and cyclodextrins with amino acids in water and aqueous-organic solvents of variable composition was examined. The contributions of the entropy solvation of complexes of 18-crown-6 with glycine, alanine, phenylalanine to the change in the entropy of complexation in water-ethanol and water-dimethyl sulfoxide solvents was calculated and analyzed. It was found that the ratios of the entropy and enthalpy solvation of the reagents for these systems have similar trends when moving from water to aqueous-organic mixtures. The relationship between the thermodynamic characteristics and structural features of the complexation processes between cyclodextrins and amino acids has been established. The thermodynamic enthalpy–entropy compensation effect was revealed, and its features for complexation of cyclodextrins and 18-crown-6 were considered. It was concluded that, based on the thermodynamic parameters of molecular complexation, one could judge the mode of the formation of complexes, the main driving forces of the interactions, and the degree of desolvation.

Mass Spectrometry Coupled with Chromatography toward Separation and Identification of Organic Mixtures

Mass spectrometers can provide information about molecular composition and chemical structure. However, with complex mixtures, superpositions and even suppression of signals may occur. On the other hand, Chromatography is an ideal technique for separating complexes but is often insufficient for compound identification. Hence, coupling both techniques in order to eliminate the limitations of each technique makes perfect sense. In this contribution, a brief description of mass spectrometry coupled with chromatography in the gas and liquid phase will be discussed to explain the advantages of coupling the two methods. The ionization techniques are also reported and followed by application areas of these techniques. Finally, the recording and treatment of the results are reviewed.

Forward Osmosis Absorption Heat Pumps for Space Conditioning and Graywater Purification: Cycle Development and Working Fluids Selection

A thermodynamic model is developed for a forward osmosis absorption heat pump capable of purifying graywater and providing year-round space conditioning with low-temperature heat as the primary energy input. The model is applied to 16 potential absorbents, and six are selected for parametric studies on desorber temperature, absorber temperature, condenser temperature, and heat sink temperature to determine the effects on the energy ratio (defined as the ratio of total useful output to total power input) of the cycle and the required graywater flow rate. Experiments are conducted to test the water flux and reverse solute flux in forward osmosis (FO) for most the promising absorbents. Of the six selected absorbents, four – two salt-organic mixtures and two pure salts – appear the most promising thermodynamically, while an ionic liquid demonstrates the best FO behavior.

A Computational Study on the Ca2+ Solvation, Coordination Environment, and Mobility in Electrolytes for Calcium Ion Batteries

Calcium (ion) batteries are promising next-generation energy storage systems, owing to their numerous benefits in terms of performance metrics, low-cost, mineral abundance, and economic sustainability. A central and critical area to the advancement of the technology is the development of suitable eletrolytes that allow for good salt solubility, ion mobility, electrochemical stability, and reversible redox activity. At this time, the study of different solvent-salt combinations is very limited. Here, we present a computational study on the coordination environment, solvation energetics, and diffusivity of calcium ions over a range of pertinent ionic liquids, cyclic and acylic alkyl carbonates, and specific alkyl nitriles and alkyl formamides, using the salts calcium bis(trifluoromethylsulfonyl)imide (Ca(TFSI)2) and calcium perchlorate (Ca(ClO4)2). Key findings are that several solvents from different solvent classes present comparable solvation environments and mobilities. Ca(TFSI)2 is prefered over Ca(ClO4)2 owing to the former’s mix coordination of Ca2+ to O and N atoms. Ionic liquids with alkyl sulfonate anions provide better coordation over TFSI, which leads to greater diffusivity. Binary organic mixtures (carbonates) provide the best solvation of Ca2+, however, single organic solvents also provide good solvation, such as EC, THF and DMF, as well as some acyclic carbonates. Ion pairing with the salt anion is always present, but can be mitigated through solvent selection, which also correlates to greater mobility; however, there are examples in which strong ion pairing is not significantly adverse to diffusivity. The solvent incorporate into the solvation structure with binary organic mixtures correlates well with the solvation capabilities of the individual solvents. Finally, we show that ionic liquids (specifically alkyl imidazole (cation) alkyl sulfonate (anion) ionic liquids) do not decompose when coordinating at a Ca metal interface, which indicates its promising stability. Overall, this study contributes further generalized understanding of the correlation between solvent and salt and the resultant Ca2+ complexes and Ca2+ mobility in a range of electrolytes, and reveals a range of possible solvents suitable for exploration in calcium (ion) batteries.

A Computational Study on the Ca2+ Solvation, Coordination Environment, and Mobility in Electrolytes for Calcium Ion Batteries

Calcium (ion) batteries are promising next-generation energy storage systems, owing to their numerous benefits in terms of performance metrics, low-cost, mineral abundance, and economic sustainability. A central and critical area to the advancement of the technology is the development of suitable eletrolytes that allow for good salt solubility, ion mobility, electrochemical stability, and reversible redox activity. At this time, the study of different solvent-salt combinations is very limited. Here, we present a computational study on the coordination environment, solvation energetics, and diffusivity of calcium ions over a range of pertinent ionic liquids, cyclic and acylic alkyl carbonates, and specific alkyl nitriles and alkyl formamides, using the salts calcium bis(trifluoromethylsulfonyl)imide (Ca(TFSI)2) and calcium perchlorate (Ca(ClO4)2). Key findings are that several solvents from different solvent classes present comparable solvation environments and mobilities. Ca(TFSI)2 is prefered over Ca(ClO4)2 owing to the former’s mix coordination of Ca2+ to O and N atoms. Ionic liquids with alkyl sulfonate anions provide better coordation over TFSI, which leads to greater diffusivity. Binary organic mixtures (carbonates) provide the best solvation of Ca2+, however, single organic solvents also provide good solvation, such as EC, THF and DMF, as well as some acyclic carbonates. Ion pairing with the salt anion is always present, but can be mitigated through solvent selection, which also correlates to greater mobility; however, there are examples in which strong ion pairing is not significantly adverse to diffusivity. The solvent incorporate into the solvation structure with binary organic mixtures correlates well with the solvation capabilities of the individual solvents. Finally, we show that ionic liquids (specifically alkyl imidazole (cation) alkyl sulfonate (anion) ionic liquids) do not decompose when coordinating at a Ca metal interface, which indicates its promising stability. Overall, this study contributes further generalized understanding of the correlation between solvent and salt and the resultant Ca2+ complexes and Ca2+ mobility in a range of electrolytes, and reveals a range of possible solvents suitable for exploration in calcium (ion) batteries.

Recent Advances of Pervaporation Separation in DMF/H2O Solutions: A Review

N,N-dimethylformamide (DMF) is a commonly-used solvent in industry and pharmaceutics for extracting acetylene and fabricating polyacrylonitrile fibers. It is also a starting material for a variety of intermediates such as esters, pyrimidines or chlordimeforms. However, after being used, DMF can be form 5–25% spent liquors (mass fraction) that are difficult to recycle with distillation. From the point of view of energy-efficiency and environment-friendliness, an emergent separation technology, pervaporation, is broadly applied in separation of azeotropic mixtures and organic–organic mixtures, dehydration of aqueous–organic mixtures and removal of trace volatile organic compounds from aqueous solutions. Since the advances in membrane technologies to separate N,N-dimethylformamide solutions have been rarely reviewed before, hence this review mainly discusses the research progress about various membranes in separating N,N-dimethylformamide aqueous solutions. The current state of available membranes in industry and academia, and their potential advantages, limitations and applications are also reviewed.

Unified pH Measurements of Ethanol, Methanol, and Acetonitrile, and Their Mixtures with Water

Measurement of pH in aqueous-organic mixtures with different compositions is of high importance in science and technology, but it is, at the same time, challenging both from a conceptual and practical standpoint. A big part of the difficulty comes from the fundamental incomparability of conventional pH values between solvents (spH, solvent-specific scales). The recent introduction of the unified pH (pHabs) concept opens up the possibility of measuring pH, expressed as pHabsH2O, in a way that is comparable between solvent, and, thereby, removing the conceptual problem. However, practical issues remain. This work presents the experience of the authors with measuring pHabsH2O values in mixtures of methanol, ethanol, and acetonitrile, with water, but without the presence of buffers or other additives. The aim was to assigned pHabsH2O values to solvent–water mixtures using differential potentiometry and the ‘pHabs-ladder’ method. Measurements were made of the potential difference between glass electrodes immersed in different solutions, separated by an ionic liquid salt bridge. Data were acquired for a series of solutions of varying solvent content. This work includes experiences related to: a selection of commercial electrodes, purity of starting material, and comparability between laboratories. Ranges of pHabsH2O values for selected compositions of solvent–water mixtures are presented.