ccd array
Recently Published Documents


TOTAL DOCUMENTS

137
(FIVE YEARS 8)

H-INDEX

11
(FIVE YEARS 0)

Photonics ◽  
2021 ◽  
Vol 8 (9) ◽  
pp. 390
Author(s):  
Vladimir V. Kirsanov ◽  
Alexey V. Shkirin ◽  
Dmitriy Yu. Pavkin ◽  
Dmitry N. Ignatenko ◽  
Georgy L. Danielyan ◽  
...  

Automation of milking systems is linked to accurate measurement of fluctuations in milk flow during milking. To assess the fluctuations of the milk flow, the formation and movement of milk portions in the milking machine-milk pipeline system was studied. By considering the movement of a milk plug along the milk pipeline, a hydraulic model of the formation of a critical volume of milk in the milking machine manifold was compiled. In practice, the most expedient way of determining milk flow parameters may be to measure the laser fluorescent and extinction responses of moving air-milk mixture. We have implemented a new laser sensing method for measuring the flow rate and composition of milk on the basis of counting the optical response pulses received from moving dispersed components by a CCD array or a randomized fiber optic bundle. Using the developed laser sensors, the theoretical model of milk flow was tested.


2021 ◽  
Vol 13 (2) ◽  
pp. 25
Author(s):  
Dariusz Czyżewski ◽  
Irena Fryc

This paper presents that the opto-electrical characteristic of a typical CCD based digital camera is nonlinear. It means that digital electric signal of the camera's CCD detector - is not a linear function of the luminance value on camera's lens. The opto-electrical characteristic feature of a digital camera needs to be transformed into a linear function if this camera is to be used as a luminance distribution measurement device known as Imaging Luminance Measurement Device (ILMD). The article presents the methodology for obtaining the opto-electrical characteristic feature of a typical CCD digital camera and focuses on the non- linearity correction method. Full Text: PDF ReferencesD. Wüller and H. Gabele, "The usage of digital cameras as luminance meters," in Digital Photography III, 2007, p. 65020U CrossRef P. Fiorentin and A. Scroccaro, "Detector-Based Calibration for Illuminance and Luminance Meters-Experimental Results," IEEE Transactions on Instrumentation and Measurement, vol. 59, no. 5, pp. 1375-1381, 2010 CrossRef M. Shpak, P. Kärhä, G. Porrovecchio, M. Smid, and E. Ikonen, "Luminance meter for photopic and scotopic measurements in the mesopic range," Meas. Sci. Technol, vol. 25, no. 9, p. 95001, 2014, CrossRef P. Fiorentin, P. Iacomussi, and G. Rossi, "Characterization and calibration of a CCD detector for light engineering," IEEE Transactions on Instrumentation and Measurement, vol. 54, no. 1, pp. 171-177, 2005, CrossRef I. Fryc and E. Czech, "Application of optical fibers and CCD array for measurement of luminance distribution," in Proc. SPIE 5064, Lightmetry 2002: Metrology and Testing Techniques Using Light, 2003, pp. 18-21, CrossRef I. Fryc, "Accuracy of spectral correction of a CCD array for luminance distribution measurement," in Proc. SPIE 5064, Lightmetry 2002: Metrology and Testing Techniques Using Light, 2003, pp. 38-42, CrossRef I. Fryc, "Analysis of the spectral correction errors of illuminance meter photometric head under the influence of the diffusing element," Optical Engineering, vol. 40, no. 8, pp. 1636-1640, 2001. CrossRef D. Czyzewski, "Monitoring of the subsequent LED lighting installation in Warsaw in the years 2014-2015," in Proceedings of 2016 IEEE Lighting Conference of the Visegrad Countries, Lumen V4 2016, 2016, pp. 1-4, CrossRef M. Sielachowska, D. Tyniecki, and M. Zajkowski, "Measurements of the Luminance Distribution in the Classroom Using the SkyWatcher Type System," in 2018 VII. Lighting Conference of the Visegrad Countries (Lumen V4), 2018, pp. 1-5, CrossRef W. Malska and H. Wachta, "Elements of inferential statistics in a quantitative assessment of illuminations of architectural structures," in 2016 IEEE Lighting Conference of the Visegrad Countries (Lumen V4), 2016, pp. 1-6, CrossRef T. Kruisselbrink, R. Dangol, and A. Rosemann, "Photometric measurements of lighting quality: An overview," Building and Environment, vol. 138, pp. 42-52, 2018. CrossRef A. Borisuit, M. Münch, L. Deschamps, J. Kämpf, and J.-L. Scartezzini, "A new device for dynamic luminance mapping and glare risk assessment in buildings," in Proc. SPIE 8485. Nonimaging Optics: Efficient Design for Illumination and Solar Concentration IX, 2012, vol. 8485, p. 84850M, CrossRef I. Lewin and J. O'Farrell, "Luminaire photometry using video camera techniques," Journal of the Illuminating Engineering Society, vol. 28, no. 1, pp. 57-63, 1999, CrossRef D. Czyżewski, "Research on luminance distributions of chip-on-board light-emitting diodes," Crystals, vol. 9, no. 12, pp. 1-14, 2019, CrossRef K. Tohsing, M. Schrempf, S. Riechelmann, H. Schilke, and G. Seckmeyer, "Measuring high-resolution sky luminance distributions with a CCD camera," Applied optics, vol. 52, no. 8, pp. 1564-1573, 2013. CrossRef D. Czyzewski, "Investigation of COB LED luminance distribution," in Proceedings of 2016 IEEE Lighting Conference of the Visegrad Countries, Lumen V4 2016, 2016, pp. 1-4, CrossRef A. de Vries, J. L. Souman, B. de Ruyter, I. Heynderickx, and Y. A. W. de Kort, "Lighting up the office: The effect of wall luminance on room appraisal, office workers' performance, and subjective alertness," Building and Environment, 2018 CrossRef D. Silvestre, J. Guy, J. Hanck, K. Cornish, and A. Bertone, "Different luminance- and texture-defined contrast sensitivity profiles for school-aged children," Nature. Scientific Reports, vol. 10, no. 13039, 2020, CrossRef H. Wachta, K. Baran, and M. Leśko, "The meaning of qualitative reflective features of the facade in the design of illumination of architectural objects," in AIP Conference Proceedings, 2019, vol. 2078, no. 1, p. 20102. CrossRef CIE, "Technical raport CIE 231:2019. CIE Classification System of Illuminance and Luminance Meters.," Vienna, Austria, 2019. CrossRef DIN, "Standard DIN 5032-7:2017. Photometry - Part 7: Classification of illuminance meters and luminance meters.," 2017. DirectLink CEN, "EN 13032-1:2004. Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 1: Measurement and file format," Bruxelles, Belgium., 2004. DirectLink CIE, "Technical raport CIE 231:2019. CIE Classification System of Illuminance and Luminance Meters," Vienna, Austria, 2019 CrossRef E. Czech, D. Czyzewski, "The linearization of the relationship between scene luminance and digital camera output levels", Photonics Letter of Poland 13, 1 (2021). CrossRef


2021 ◽  
Vol 13 (1) ◽  
pp. 16
Author(s):  
Eugeniusz Czech ◽  
Dariusz Czyżewski

This paper presents the results of linearity testing of the integrated image sensor of a CCD-equipped digital camera. The study demonstrated the lack of linearity of the characteristics of the sensor when scaling with the luminance standard signal. In the course of the research the function approximated by the fifth-degree polynomial was determined. After the appropriate transformation, this function would enable the linearization of the signal from the studied image sensor. The study demonstrated the possibility of linearizing the signal of integrated image sensors for correct luminance measurements. Thus, the possibility of reducing the nonlinearity error of integrated image sensors was discussed. Full Text: PDF ReferencesT. Tashiro, S. Kawanobe, T. Kimura-Minoda, S. Kohko, T. Ishikawa, and M. Ayama, "Discomfort glare for white LED light sources with different spatial arrangements," Lighting Research and Technology, vol. 47, no. 3, pp. 316-337, 2015, doi: 10.1177/1477153514532122. CrossRef A. de Vries, J. L. Souman, B. de Ruyter, I. Heynderickx, and Y. A. W. de Kort, "Lighting up the office: The effect of wall luminance on room appraisal, office workers' performance, and subjective alertness," Building and Environment, 2018, doi: 10.1016/j.buildenv.2018.06.046. CrossRef E. Czech and I. Fryc, "Illumination quality measurement of the work-station," in Proc. SPIE 5566. Optical Security and Safety, 2004, vol. 5566, pp. 239-242. CrossRef D. Czyzewski, "Monitoring of the lighting conditions of a street illuminated with road lights equipped with LEDs," Przeglad Elektrotechniczny, vol. 86, no. 10, pp. 170-172, 2010. DirectLink S. Słomiński, "Identifying problems with luminaire luminance measurements for discomfort glare analysis," Lighting Research and Technology, vol. 48, no. 5, pp. 573-588, 2016 CrossRef D. Czyzewski, "Monitoring of the subsequent LED lighting installation in Warsaw in the years 2014-2015," in Proceedings of 2016 IEEE Lighting Conference of the Visegrad Countries, Lumen V4 2016, 2016, pp. 1-4, CrossRef F. Greffier, V. Muzet, V. Boucher, F. Fournela, and R. Dronneau, "Use of an imaging luminance measuring device to evaluate road lighting performance at different angles of observation," in Proceedings of the 29th Quadrennial Session of the CIE, 2019, pp. 553-562. CrossRef D. Czyżewski, "Comparison of luminance distribution on the lighting surface of power LEDs," Photonics Letters of Poland, vol. 11, no. 4, pp. 118-120, 2019, doi: 10.4302/plp.v11i4.966. CrossRef S. Zalewski, "Design of optical systems for LED road luminaires," Applied Optics, vol. 54, no. 2, pp. 163-170, 2015, doi: 10.1364/ao.54.000163. CrossRef D. Czyzewski, "Investigation of COB LED luminance distribution," in Proceedings of 2016 IEEE Lighting Conference of the Visegrad Countries, Lumen V4 2016, 2016, pp. 1-4, CrossRef M. Jongewaard, "Guide to selecting the appropriate type of light source model," in Proc.SPIE, Aug. 2002, vol. 4775, pp. 86-98, CrossRef D. Czyzewski, "Luminance distribution of LED luminous surface," Przeglad Elektrotechniczny, vol. 86, no. 10, pp. 166-169, 2010. DirectLink D. Czyżewski, "Research on luminance distributions of chip-on-board light-emitting diodes," Crystals, vol. 9, no. 12, pp. 1-14, 2019, CrossRef J. Fang, H. Xu, W. Lv, and M. R. Luo, "59-3: Proper Luminance of HDR TV system," in SID Symposium Digest of Technical Papers, 2016, pp. 806-808, CrossRef E. A. Cooper, H. Jiang, V. Vildavski, J. E. Farrell, and A. M. Norcia, "Assessment of OLED displays for vision research.," Journal of vision, vol. 13, no. 12, pp. 1-13, 2013 CrossRef C. D. Galatanu, "Improving the Luminance Measurement from Digital Images," in 2019 International Conference on Electromechanical and Energy Systems (SIELMEN), 2019, pp. 1-4. CrossRef M. Moeck and S. Anaokar, "Illuminance analysis from high dynamic range images," LEUKOS - Journal of Illuminating Engineering Society of North America, vol. 2, no. 3, pp. 211-228, 2006, CrossRef D. Wüller and H. Gabele, "The usage of digital cameras as luminance meters," in Digital Photography III, 2007, p. 65020U CrossRef I. Fryc and E. Czech, "Spectral correction of the measurement CCD array," Optical Engineering, vol. 41, no. 10, pp. 2402-2406, 2002, CrossRef I. Fryc, "Accuracy of spectral correction of a CCD array for luminance distribution measurement," in Proc. SPIE 5064, Lightmetry 2002: Metrology and Testing Techniques Using Light, 2003, pp. 38-42 CrossRef I. Fryc, "Analysis of the spectral correction errors of illuminance meter photometric head under the influence of the diffusing element," Optical Engineering, vol. 40, no. 8, pp. 1636-1640, 2001. CrossRef S. W. Brown, G. P. Eppeldauer, and K. R. Lykke, "Facility for spectral irradiance and radiance responsivity calibrations using uniform sources," Applied Optics, vol. 45, no. 32, pp. 8218-8237, 2006 CrossRef D. W. Allen, G. P. Eppeldauer, S. W. Brown, E. A. Early, B. C. Johnson, and K. R. Lykke, "Calibration and characterization of trap detector filter radiometers," in Proc. SPIE 5151. Earth Observing Systems VIII, 2003, pp. 471-479 CrossRef I. Lewin and J. O'Farrell, "Luminaire photometry using video camera techniques," Journal of the Illuminating Engineering Society, vol. 28, no. 1, pp. 57-63, 1999, CrossRef P. Fiorentin, P. Iacomussi, and G. Raze, "Characterization and calibration of a CCD detector for light engineering," IEEE Transactions on Instrumentation and Measurement, vol. 54, no. 1, pp. 171-177, 2005 CrossRef I. Fryc and E. Czech, "Application of optical fibers and CCD array for measurement of luminance distribution," in Proc. SPIE 5064, Lightmetry 2002: Metrology and Testing Techniques Using Light, 2003, pp. 18-21, CrossRef International Organization for Standardization, "Standard ISO 14524:2009 Photography - Electronic still-picture cameras - Methods for measuring opto-electronic conversion functions (OECFs)," International Organization for Standardization Publication, 2009. CrossRef I. Fryc, "Chosen properties of a photometric detector BPYP 07," in Proc. SPIE 4517, Lightmetry: Metrology, Spectroscopy, and Testing Techniques Using Light, 2001, vol. 4517, pp. 34-36 CrossRef D. Mozyrska, I. Fryc, and M. Wyrwas, "Nonlinear numerical models of spectral power distributions of black body," PRZEGLAD ELEKTROTECHNICZNY, vol. 87, no. 4, pp. 116-119, 2011. DirectLink D. Mozyrska and I. Fryc, "Spectroradiometric data interpolation and approximation-case study," PRZEGLAD ELEKTROTECHNICZNY, vol. 85, no. 11, pp. 253-256, 2009. CrossRef


2021 ◽  
pp. 21-29
Author(s):  
Raisa I. Stolyarevskaya

The article is devoted to the peculiarities of solving problems of applied photometry based on the spectroradiometric approach using modern matrix spectrometers. The spectral distribution of the characteristics of the radiation source is an objective physical basis for determining its light and colour parameters. In this case, the photometric characteristics of lighting devices and lighting systems are calculated on the basis of tabulated spectral light efficiencies and ordinates of CIE colour-matching functions. The main reason for the shift in emphasis towards spectral measurements is due to revolutionary introduction into the system of internal and external lighting and signalling LED sources of light with an emission spectrum that is different from the traditional natural and artificial continuous light sources spectra. Integral methods for measuring the light and colour characteristics of semiconductor light sources require the highest quality correction of photometric channels (heads) for spectral efficiencies and colour -matching curves or taking into account a correction factor, which in turn is impossible without measuring the relative spectral characteristics of emitters and receivers. The article is a brief overview of the requirements for the CCD-array spectrometers for use in spectroradiometry and photometry.


2020 ◽  
Vol 12 (4) ◽  
pp. 121
Author(s):  
Dariusz Czyżewski

Luminance measurements are used in a vast range of lighting technology fields. The author’s research has proved that measuring the luminance distribution on light source surface is the most challenging part of this process. The research has been conducted for a commercially available digital luminance distribution meter, with the goal of analyzing the influence of image focus settings and exposure parameters on the measured luminance values. It has been concluded that the incorrect image focus and inadequately matched exposure parameters (distance from the workpiece) contribute to quantitative changes in the information on luminance distribution on the LED surface and affect the precision the maximum luminance determination. Full Text: PDF ReferencesC. Xu, H. Cheng, and Y. Feng, "Optical design of rectangular illumination with freeform lenses for the application of LED road lighting," Frontiers of Optoelectronics, 2017, CrossRef D. Czyzewski, "LED substitutes of conventional incandescent lamps," Przeglad Elektrotechniczny, vol. 88, no. 11A, pp. 123-127, 2012. DirectLink W. R. Ryckaert, K. A. G. Smet, I. A. A. Roelandts, M. Van Gils, and P. Hanselaer, "Linear LED tubes versus fluorescent lamps: An evaluation," Energy and Buildings, 2012, CrossRef X.-H. Lee, I. Moreno, and C.-C. Sun, "High-performance LED street lighting using microlens arrays," Optics Express, 2013, CrossRef D. Czyzewski, "The street lighting luminaires with LEDs," Przeglad Elektrotechniczny, vol. 86, pp. 276-279, 2009. DirectLink D. Mozyrska, M. Wyrwas, and I. Fryc, "The determination of the LEDs colorimetric parameters, in the range of their operating temperature," Przeglad Elektrotechniczny, vol. 93, no. 4a, pp. 232-234, 2012. DirectLink J. Kowalska and I. Fryc, "Colour rendition quality of typical fluorescent lamps determined by CIE colour fidelity index and colour rendering index," Przeglad Elektrotechniczny, vol. 95, no. 7, pp. 94--97, 2019, CrossRef J. Kowalska, "Analysis of parameters describing the quality of the color rendering of light sources according to the IES TM-30-15 and the CIE 013.3-1995," Przeglad Elektrotechniczny, vol. 93, no. 6, pp. 50--54, 2017, CrossRef K. Houser, M. Mossman, K. Smet, and L. Whitehead, "Tutorial: Color Rendering and Its Applications in Lighting," LEUKOS - Journal of Illuminating Engineering Society of North America, vol. 12, no. 1-2, pp. 7-26, 2016, CrossRef S. Słomiński, "Identifying problems with luminaire luminance measurements for discomfort glare analysis," Lighting Research and Technology, 2016, CrossRef D. Czyzewski, "Investigation of COB LED luminance distribution," 2016, CrossRef M. Jongewaard, "Guide to selecting the appropriate type of light source model," in Proc.SPIE, Aug. 2002, vol. 4775, CrossRef D. Czyzewski, "Selected problems of defining the luminous area of electroluminescent diodes," Przeglad Elektrotechniczny, vol. R. 84, nr 8, pp. 125-128, 2008. DirectLink C. D. Galatanu, "Improving the Luminance Measurement from Digital Images," in 2019 International Conference on Electromechanical and Energy Systems (SIELMEN), 2019, pp. 1-4. CrossRef I. Fryc and E. Czech, "Application of optical fibers and CCD array for measurement of luminance distribution," in Proc. SPIE 5064, Lightmetry 2002: Metrology and Testing Techniques Using Light, 2003, pp. 18-21, CrossRef I. Fryc and E. Czech, "Spectral correction of the measurement CCD array," Optical Engineering, 2002, CrossRef I. Fryc, "Angular characteristics of a silicon detector spectral sensitivity corrected by an absorption filter," in Proc. SPIE 4517, Lightmetry: Metrology, Spectroscopy, and Testing Techniques Using Light, 2001, pp. 42-45, CrossRef I. Fryc, "Accuracy of spectral correction of a CCD array for luminance distribution measurement," in Proc. SPIE 5064, Lightmetry 2002: Metrology and Testing Techniques Using Light, 2003, pp. 38-42, CrossRef M. Moeck and S. Anaokar, "Illuminance analysis from high dynamic range images," LEUKOS - Journal of Illuminating Engineering Society of North America, pp. 211-228, 2006, CrossRef D. Czyżewski, "Research on luminance distributions of chip-on-board light-emitting diodes," Crystals, 2019, CrossRef


2020 ◽  
Author(s):  
Liang Xi ◽  
Fuqi Si ◽  
Yu Jiang ◽  
Haijin Zhou ◽  
Kai Zhan ◽  
...  

Abstract. We present a novel airborne imaging differential optical absorption spectroscopy (DOAS) instrument: Ultraviolet Visible Hyperspectral Imaging Spectrometer (UVHIS), which is developed for trace gas monitoring and pollution mapping. Within a broad spectral range from 200 to 500 nm, operated in three channels, the spectral resolution of UVHIS is better than 0.5 nm. The optical design of each channel comprises a fore-optics with a field of view (FOV) of 40°, an Offner imaging spectrometer, and a charge-coupled device (CCD) array detector of 1032 × 1072 pixels. A first demonstration flight using UVHIS was undertaken on 23 June 2018, above an approximate 600 km2 area in Feicheng, China, with a spatial resolution of about 25 × 22 m2. Measurements of nadir backscattered solar radiation of channel 3 are used to retrieve vertical column densities (VCDs) of NO2 with a mean fitting error of 2.6 × 1015 molec cm−2. The UVHIS instrument clearly detected several emission plumes transporting from south to north, with a peak value of 3 × 1016 molec cm−2 in the dominant one. UVHIS NO2 vertical columns are well correlated with ground-based mobile DOAS observations, with a correlation coefficient of 0.65 for all co-located measurements, and a slight underestimation for polluted observations. This study demonstrates the capability of UVHIS for NO2 local emission and transmission monitoring.


2020 ◽  
Vol 31 (4) ◽  
pp. 047001
Author(s):  
Daniel P Duarte ◽  
Rogério N Nogueira ◽  
Lúcia B Bilro

Sensors ◽  
2018 ◽  
Vol 18 (6) ◽  
pp. 1794 ◽  
Author(s):  
Guoqing Zhou ◽  
Linjun Jiang ◽  
Jingjin Huang ◽  
Rongting Zhang ◽  
Dequan Liu ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document