A personalized FEM model for reproducible measurement of anti-inflammatory drugs in transdermal administration to knee

A personalized model of the human knee for enhancing the inter-individual reproducibility of a measurement method for monitoring Non-Steroidal Anti-Inflammatory Drugs (NSAIDs) after transdermal delivery is proposed. The model is based on the solution of Maxwell Equations in the electric-quasi-stationary limit via Finite Element Analysis. The dimensions of the custom geometry are estimated on the basis of knee circumference at the patella, body mass index, and sex of each individual. An optimization algorithm allows to find out the electrical parameters of each subject by experimental impedance spectroscopy data. Muscular tissues were characterized anisotropically, by extracting Cole–Cole equation parameters from experimental data acquired with twofold excitation, both transversal and parallel to tissue fibers. A sensitivity and optimization analysis aiming at reducing computational burden in model customization achieved a worst-case reconstruction error lower than 5%. The personalized knee model and the optimization algorithm were validated in vivo by an experimental campaign on thirty volunteers, 67% healthy and 33% affected by knee osteoarthritis (Kellgren–Lawrence grade ranging in [1,4]), with an average error of 3%.

Anthropometric Analysis of Human Knee Joint in Indian Population

Background: It is well understood that distal femoral and proximal tibia scale is lower in case of the Asian than that of their western counterparts. Because of the Asian population's comparatively smaller structure and stature, many surgeons claim that imported implants may not be well fitted for Asian origin patients, mainly based on Western morphometry. It is very likely that an overweight section will be used in many Asian centres in most operations, resulting in low results of the procedure of the implant. For joint substitution of distal femur, careful positioning of fitted implants as well as balancing of underlying soft tissues is important. It is also important to use incredibly complex surgical procedures. To retain its usual functional motion spectrum, use of a suitable femoral part dimension is necessary. Furthermore, owing to a discrepancy between the size of the prosthesis and the bone, there could be a host of serious issues. Objectives: To calculate the anthropometric distal femur parameter and determine the distal femur variations on the right and left side of the morph metric measurement and to evaluate dimension of current TKA as related to Indian population. Methodology: This study included visiting the out patients Department of Orthopedics, at AVBRH in the age group 30-50 year during the period of June-2020 to April-2023 with sample size of 50 patients. Detailed history and clinical review will be taken, including age, sex, socio-economic background, type of employment. In all patients involved in the study in Orthopedic OPD, thorough radiological assessment of all the knee joints will be performed. The radiological test and various anthropometrics will include knee joint Simple X-ray and CT-Scan. Expected Results: We expect that from our results, anthropometric measurements of Indian population may differ from other literatures.

Design and Control of an Adaptive Knee Joint Exoskeleton Mechanism with Buffering Function

A knee exoskeleton with an adaptive instantaneous rotation center and impact absorption is used for rehabilitation. Due to the human knee joint’s special physiological structure and motion characteristics, the exoskeleton mechanism needs to be designed for both static and dynamic aspects. Therefore, a novel knee exoskeleton mechanism was designed. To adapt to the rotation center of the knee joint, a mechanism with cross-configuration was designed according to the equivalent degree of freedom and the stiffness of the springs was calculated by its combination with gait motion, so that the average force of the human body was minimized. A dynamic model of the exoskeleton was established. To overcome the uncertainty in the parameters of the human and robotic limbs, an adaptive controller was designed and a Lyapunov stability analysis was conducted to verify the system. A simulation was conducted and experimental results show that the tracking error of the knee joint angle between the actual and desired trajectory was within the range of −1 to 1 degree and indicate the effectiveness of the controller.

Biomechanics of aging and osteoarthritic human knee ligaments

Background. Ligaments work to stabilize the human knee joint and prevent excessive movement. Whilst ligaments are known to decline in structure and function with aging, there has been no systematic effort to study changes in gross mechanical properties in the four major human knee ligaments due to osteoarthritis (OA). This study aims to collate material properties for the anterior (ACL) and posterior (PCL) cruciate ligaments, medial (MCL) and lateral (LCL) collateral ligaments. Our cadaveric samples come from a diverse demographic from which the effects of aging and OA on bone and cartilage material properties have already been quantified. Therefore, by combining our previous bone and cartilage data with the new ligament data from this study we are facilitating subject-specific whole-joint modelling studies. Methods. The demographics of the collected cadaveric knee joints were diverse with age range between 31 to 88 years old, and OA International Cartilage Repair Society grade 0 to 4. Twelve cadaveric human knee joints were dissected, and bone-ligament-bone specimens were extracted for mechanical loading to failure. Ligament material properties were determined from the load-extension curves, namely: linear and ultimate (failure) stress and strain, secant modulus, tangent modulus, and stiffness. Results. There were significant negative correlations between age and ACL linear force (p=0.01), stress (p=0.03) and extension (p=0.05), ACL failure force (p=0.02), stress (p=0.02) and extension (p=0.02), PCL secant (p=0.02) and tangent (p=0.02) modulus, and LCL stiffness (p=0.05). Significant negative correlations were also found between OA grades and ACL linear force (p=0.05), stress (p=0.02), extension (p=0.01) and strain (p=0.03), and LCL failure stress (p=0.05). However, changes in age or OA grade did not show a statistically significant correlation with the MCL tensile parameters. Trends showed that almost all the tensile parameters of the ACL and PCLs decreased with increasing age and progression of OA. Due to small sample size, the combined effect of age and presence of OA could not be statistically derived. Conclusions. This research is the first to correlate changes in tensile properties of the four major human knee ligaments to aging and OA. The current ligament study when combined with our previous findings on bone and cartilage for the same twelve knee cadavers, supports conceptualization of OA as a whole-joint disease that impairs the integrity of many peri-articular tissues within the knee. The subject-specific data pool consisting of the material properties of the four major knee ligaments, subchondral and trabecular bones and articular cartilage will aid reconstruction and graft replacements and advance knee joint finite element models, whilst knowledge of aged or diseased mechanics may direct future therapeutic interventions.

Illustration of the connection between the vastus medialis obliquus muscle and the superficial medial collateral ligament of the knee: A human knee cadaveric study

Background: While the anatomy of the medial part of the knee has been extensively described, the muscular connections to the superficial medial collateral ligament (sMCL) have not been sufficiently studied. The purpose of this study is to describe the anatomy of the musculo-ligamentous connection between the sMCL and the Vastus Medialis Obliquus muscle (VMO), and to describe its anatomy. Methods: Six Human Cadaveric knees were used in this study. Donors were 4 males and 2 females with a mean age of 49 years old. Dissection was performed in fixed knee extension and directed to show the area of the proximal attachment of the sMCL. Results: A musculo ligamentous connection between the distal portion of the Vastus medialis Obliquus muscle and the sMCL has been identified in our entire specimens. The mean mid substance width of this connection was 9.75 (8.7 -10.8) mm, the mean length was 29.3 (22.2-36.4) mm and the mean thickness was 1.3 (0.9-1.7) mm. Conclusion: The proximal femoral attachment of the sMCL is directly connected to the distal end of VMO. This connection may show that the sMCL can possibly assist in the dynamic stabilization of the knee during extension against valgus stress, through its tension by the contracted VMO muscle.