Functional Properties of Donor (Al) and Acceptor (Cu) Codoped High Dielectric Constant ZnO Nanoparticles

In this work, we have synthesized donor-acceptor (Al-Cu) codoped ZnO nanoparticles with a doping concentration of 0%, 0.25%, 0.5%, and 0.75% by coprecipitation method. The synthesized samples were then annealed at 350°C and 600°C. All the samples showed wurtzite structure of ZnO with no secondary phase. The increase in doping concentration led to deterioration of crystalline quality, while improved crystallinity was observed at higher annealing temperature. The morphological study of these samples showed good grain-to-grain contact with less isolated pores. These samples were further characterized by impedance spectroscopy for analyzing dielectric properties. The values of the real part of dielectric constant and tangent loss showed decreasing trend with frequency. The appearance of semicircular arcs in the impedance complex plane plots indicates contribution of grains and grain boundaries and presence of different relaxation processes. 0.5% Al and Cu codoped ZnO showed the best dielectric response with a high value of dielectric constant and low tangent loss.

LoGHeD: An effective approach for negative differential resistance effect suppression in negative capacitance transistors

A negative capacitance transistor (NCFET) with fully depleted silicon-on-insulator (FDSOI) technology (NC-FDSOI) is one of the promising candidates for next-generation low-power devices. However, it suffers from the inherent negative differential resistance (NDR) effect, which is very detrimental to device and circuit designs. Aiming at overcoming this shortcoming, this paper proposes for the first time to use local Gaussian heavy doping technology (LoGHeD) in the channel near the drain side to suppress the NDR effect in the NC-FDSOI. The technical computer-aided design (TCAD) simulation results have validated that the output conductance (GDS) with LoGHeD, which is used to measure the NDR effect, increases compared to the conventional NC-FDSOI counterpart and approaches zero. With the increase in doping concentration, the inhibitory capability of the NDR effect shows a monotonously increasing trend. In addition, the proposed approach maintains and even enhances performances of the NC-FDSOI transistor regarding the electrical parameters, such as threshold voltage (VTH), sub-threshold swing (SS), switching current ratio (ION/IOFF), and drain-induced barrier lowering (DIBL).

A Mixed-Method Evaluation of a Prison Anti-doping Intervention: The Hercules Prison Program

The Norwegian Offender Mental Health and Addiction study denotes the need for physical activity and anti-doping interventions in Norwegian prisons. We developed and evaluated the efficacy of such intervention—the Hercules prison program. The program combines theoretical anti-doping lessons with practical strength training. The study adopts a mixed-methods approach (pretest-posttest design) comprising a longitudinal survey, observation, informal conversations, and in-depth interviews. Survey respondents were 104 male prisoners aged 18–56 (M = 34.81, SD = 9.34) years from seven Norwegian prisons. Of these, 52 provided both baseline and posttest responses. Participants completed questionnaires including demographic, doping use, and psychophysical items/measures. At the end of the intervention, in-depth interviews were conducted with 11 of the survey respondents. The survey data were analyzed using descriptive statistics, as well as independent and paired samples t-tests. The qualitative data were analyzed using Interpretative Phenomenological Analysis. A total of 7.5% and 33.3% of participants were current and former AAS users respectively, whereas 86.1% personally knew at least one current or former AAS user. Consistent with our expectation, there were increases in self-rated physical strength (t = −4.1, p < 0.001, d = 0.46) and strength training self-efficacy (t = −8.33, p < 0.001, d = 1.36), and a decrease in moral disengagement in doping (t = −4.05, p < 0.001, d = 0.52) from baseline to posttest. These findings are supported by the qualitative data. Notable success factors are relationship-building, instructors' expertise and acceptability, and gatekeepers' navigation and co-creation. The program provides valuable evidence of the potential benefits of combining anti-doping education with practical strength training in doping prevention in correctional settings.

Ferrimagnetic–ferromagnetic phase transition in Mn4N films favored by non-magnetic In doping

The ferrimagnet Mn4N forms a family of compounds useful in spintronics. In a compound comprising non-magnetic and magnetic elements, one basically expects the compound to become ferromagnetic when the proportion of the magnetic element increases. Conversely, one does not expect ferromagnetism when the proportion of the non-magnetic element increases. Surprisingly, Mn4N becomes ferromagnetic at room temperature when the Mn content is decreased by the addition of In atoms, a non-magnetic element. X-ray magnetic circular dichroism measurement reveals that the magnetic moment of Mn atoms at face-centered sites, Mn(II), reverses between x = 0.15 and 0.27 and aligns parallel to that of Mn atoms at corner sites, Mn(I), at x = 0.27 and 0.41. The sign of the anomalous Hall resistivity also changes between x = 0.15 and 0.27 in accordance with the reversal of the magnetic moment of the Mn(II) atoms. These results are interpreted from first-principles calculation that the magnetic moment of Mn(II) sites which are the nearest neighbors to the In atom align to that of Mn(I) sites.

A review on advances in doping with alkali metals in halide perovskite materials

Recent progress in doping of halide perovskite materials (HPM) by using targeted elements has provided a dimension beyond structural and compositional modification, for achieving desired properties and resulting device performance. Herein doping of alkali metal ions (Li+, Na+, K+, Rb+, and Cs+) in three-dimensional HPM is reviewed to lay a particular focus on advances in synthesis, doping-induced changes in optical and electrical properties, and their optoelectronic applications. The introduction of alkali metals in HPM shows an effective route for improved morphology, suppressed ion migration, reduction in non-radiative recombination, passivation of bulk and interface defects, and increased thermal stability. In the end, we provide our perspective that the effect of alkali metal incorporation on the efficiency and stability of HPM should be further investigated via in-situ characterization methods and doped HPM should be considered for more functional applications. Graphical abstract