E-Region Field-Aligned Irregularities in the Middle of a Solar Eclipse Observed by a Bistatic Radar

The Wuhan Ionospheric Oblique Backscatter Sounding System (WIOBSS) was applied as a bistatic radar to record the ionospheric E-region responses to a solar eclipse on 22 July 2009. The transmitter was located in Wuhan and the receiver was located in Huaian. The receiver observed anomalous echoes with larger Doppler shifts at the farther ranges compared with the echoes reflected by Es. According to the simulated ray propagation paths of the reflected and scattered waves, we considered that the anomalous echoes were scattered by E-region field-aligned irregularities (FAIs). The locations of the FAIs recorded by the WIOBSS were estimated with the International Geomagnetic Reference Field (IGRF) and the observed propagation parameters. These irregularities occurred at around the eclipse maximum and lasted for ~20–40 min. The steep plasma density gradient induced by the fast drop photo ionization under the lunar shadow was beneficial to the occurrence of gradient drift instability to generate the FAIs. They were different from the gravity wave-induced irregularities occurring in the recovery phase of the solar eclipse.

The Elaboration of Effective Coatings for Photonic Crystal Chips in Optical Biosensors

Here, we propose and study several types of quartz surface coatings designed for the high-performance sorption of biomolecules and their subsequent detection by a photonic crystal surface mode (PC SM) biosensor. The deposition and sorption of biomolecules are revealed by analyzing changes in the propagation parameters of optical modes on the surface of a photonic crystal (PC). The method makes it possible to measure molecular and cellular affinity interactions in real time by independently recording the values of the angle of total internal reflection and the angle of excitation of the surface wave on the surface of the PC. A series of dextrans with various anchor groups (aldehyde, carboxy, epoxy) suitable for binding with bioligands have been studied. We have carried out comparative experiments with dextrans with other molecular weights. The results confirmed that dextran with a Mw of 500 kDa and anchor epoxy groups have a promising potential as a matrix for the detection of proteins in optical biosensors. The proposed approach would make it possible to enhance the sensitivity of the PC SM biosensor and also permit studying the binding process of low molecular weight molecules in real time.

Analysis of optical Kerr effect on effective core area and index of refraction in single-mode dispersion shifted and dispersion flattened fibers

A new technique is presented for computing very useful propagation parameters like effective core area and effective index of refraction of mono-mode dispersion shifted and dispersion flattened fibers both in the presence and in the absence of Kerr nonlinearity. The technique involves application of accurate but simple expressions for modal fields developed by Chebyshev formalism. The study of the influence of Kerr nonlinearity on the aforementioned parameters, however, requires the application of the method of iteration. For the purpose of such investigation, in linear as well as nonlinear region, we take some typically used dispersion shifted and dispersion flattened fibers and we show that the results found by our simple formalism are in excellent agreement with those obtained by using complex finite element method. Further, the necessary evaluation by our simple method needs very less computations. Thus, our formalism generates ample opportunity for applications in many areas in the field of nonlinear optics.

An analysis of anomalous propagation parameters and its effect on the intensity of clutter in weather radars

Weather radar is used by forecasters for identifying storms and estimating its corresponding precipitation. Anomalous propagation of the radar beam may lead to misinterpretation of the weather events and associated errors in precipitation estimates. As the weather radar transmits electromagnetic waves, it is affected by the refractive index of the atmosphere which depends on the temperature, pressure and water vapor content. It is important to understand the refractive index of the atmosphere and how it affects the beam propagation of the radar to interpret the echoes better. Meteorological conditions causing anomalous propagation is well described in literature by Battan (1973), Doviak and Zrnik (2006) and Rinehart (2001). The vertical refractivity gradient (VRG) affects the propagation of radio waves in the atmosphere (Gossard, 1977). These anomalous propagation cause clutter to be displayed in the radar images. The intensity of the clutter was differentiated into various groups by the amount of clutter present in the radar image. Refractivity parameters at various heights and the height of the temperature inversion layer were calculated using radiosonde observational data at the Visakhapatnam (VSK) station. The observed values from the radiosonde data were compared with the intensity groups and it was found that three parameters were influential in determining the intensity of the clutter which is the presence of the temperature inversion layer above the radar, the VRG of the temperature inversion layer above the radar and the VRG from the radar to a height of 1 km from sea level.

Size-Induced Constraint Effects on Crack Initiation and Propagation Parameters in Ductile Polymers

Fracture mechanics are of high interest for the engineering design and structural integrity assessment of polymeric materials; however, regarding highly ductile polymers, many open questions still remain in terms of fully understanding deformation and fracture behaviors. For example, the influence of the constraint and specimen size on the fracture behavior of polymeric materials is still not clear. In this study, a polymeric material with an elastic plastic deformation behavior (ABS, acrylonitrile butadiene styrene) is investigated with regard to the influence of constraint and specimen size. Different single-edge notched bending (SENB) specimen sizes with constant geometrical ratios were tested. The material key curve was used to investigate differences in the constraint, where changes for small and large specimen sizes were found. Based on a size-independent crack resistance curve (J–R curve), two apparent initiation parameters (J0.2 and Jbl) were determined, namely, the initiation parameter Jini (based on the crack propagation kinetics curve) and the initiation parameter JI,lim (based on an ESIS TC 4 draft protocol). It was found that J0.2 and Jbl could be used as crack initiation parameters whereby Jini and JI,lim are indicative of the onset of stable crack growth.

Numerical Simulation of Detonation Propagation in Flame Arrestor Applications

A detail numerical study of detonation propagation and interaction with a flame arrestor product was conducted. The simulation domain was based on the detonation flame arrestor validation test setup. The flame arrestor element was modeled as a porous zone using the Forchheimer equation. The coefficients of the Forchheimer equation were determined using experimental data. The Forchheimer equation was incorporated into the governing equations for axisymmetric reactive turbulent flow as a momentum sink. A 21-step elementary reaction mechanism with 10 species was used to model the stoichiometric oxyhydrogen detonation. Different cases of detonation propagation including inviscid, viscous adiabatic, and viscous with heat transfer and a porous zone were studied. A detail discussion of the detonation propagation and effect of the arrestor geometry, the heat transfer and the porous zone are presented. The inviscid numerical model solutions of the detonation propagation parameters are compared to one-dimensional analytical solution for verification. The viscous solutions are qualitatively compared to historical experimental data which shows very similar trend. The effect of the porous media parameters on shock transmission and re-initiation of detonation is presented.