Development of On-Board Tilt Mirror Calibration Mechanism without Holding and Release Mechanism

The on-board tilting mirror calibration mechanism has a mechanical driving part that helps to achieve the main functional modes of deployment and stow when calibrating a spaceborne imaging sensor. In general, it is necessary to consider a holding and release device in the mechanism design, to secure the structural safety of the mechanical driving part in severe launch environments. However, in the present study, we proposed a novel design strategy based on mass balancing, to guarantee mechanical safety on the driving part of the tilt mirror mechanism, although the implementation of the holding and release mechanism was not considered in the design. The effectiveness of the proposed design was experimentally verified via launch vibration and life cycle tests. The test results demonstrated that the mechanism fulfills all the required functions, and the design approach proposed in this study is effective for ensuring mechanical safety on the driving part of the tilting mirror mechanism in severe launch vibration environments.

Application of Optimization Method for Calibration and Maintenance of Power-Based Belt Scale

Process optimization and improvement strategies applied in a crushing plant are coupled with the measurement of such improvements, and one of the indicators for improvements is the mass flow at different parts of the circuit. The estimation of the mass flow using conveyor belt power consumption allows for a cost-effective solution. The principle behind the estimation is that the power draw from a conveyor belt is dependent on the load on the conveyor, conveyor speed, geometrical design, and overall efficiency of the conveyor. Calibration of the power-based belt scale is carried out periodically to ensure the accuracy of the measurement. In practical implementation, certain conveyors are not directly accessible for calibration to the physical measurement as these conveyors have limited access or it is too costly to interrupt the ongoing production process. For addressing this limitation, a better strategy is needed to calibrate the efficiency of the power-based belt scale and maintain the reliability of such a system. This paper presents the application of an optimization method for a data collection system to calibrate and maintain accurate mass flow estimation. This includes calibration of variables such as the efficiency of the power-based belt scale. The optimization method uses an error minimization optimization formulation together with the mass balancing of the crushing plant to determine the efficiency of accessible and non-accessible conveyors. Furthermore, a correlation matrix is developed to monitor and detect deviations in the estimation for the mass flow. The methods are applied and discussed for operational data from a full-scale crushing plant.

Investigating River Water/Groundwater Interaction along a Rivulet Section by 222Rn Mass Balancing

Investigation of river water/groundwater interaction aims generally at: (i) localizing water migration pathways; and (ii) quantifying water and associated matter exchange between the two natural water resources. Related numerical models generally rely on model-specific parameters that represent the physical conditions of the catchment and suitable aqueous tracer data. A generally applicable approach for this purpose is based on the finite element model FINIFLUX that is using the radioactive noble gas radon-222 as naturally occurring tracer. During the study discussed in this paper, radon and physical stream data were used with the aim to localize and quantify groundwater discharge into a well-defined section of a small headwater stream. Besides site-specific results of two sampling campaigns, the outcomes of the study reveal: (i) the general difficulties of conducting river water/groundwater interaction studies in small and heterogeneous headwater catchments; and (ii) the particular challenge of defining well constrained site- and campaign-specific values for both the groundwater radon endmember and the radon degassing coefficient. It was revealed that determination of both parameters should be based on as many data sources as possible and include a critical assessment of the reasonability of the gathered and used datasets. The results of our study exposed potential limitations of the approach if executed in small and turbulent headwater streams. Hence, we want to emphasize that the project was not only executed as a case study at a distinct site but rather aimed at evaluating the applicability of the chosen approach for conducting river water/groundwater interaction studies in heterogeneous headwater catchments.

Publisher Correction: Fabrication of high-performance dual carbon Li-ion hybrid capacitor: mass balancing approach to improve the energy-power density and cycle life

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Mineralization of organic matter in boreal lake sediments: rates, pathways, and nature of the fermenting substrates

The complexity of organic matter (OM) degradation mechanisms represents a significant challenge for developing biogeochemical models to quantify the role of aquatic sediments in the climate system. The common representation of OM by carbohydrates formulated as CH2O in models comes with the assumption that its degradation by fermentation produces equimolar amounts of methane (CH4) and dissolved inorganic carbon (DIC). To test the validity of this assumption, we modelled using reaction-transport equation vertical profiles of the concentration and isotopic composition (δ13C) of CH4 and DIC in the top 25 cm of the sediment column from two lake basins, one whose hypolimnion is perennially oxygenated and one with seasonal anoxia. Furthermore, we modelled solute porewater profiles reported in the literature for four other seasonally anoxic lake basins. A total of 17 independent porewater datasets are analyzed. CH4 and DIC production rates associated with methanogenesis at the five seasonally anoxic sites collectively show that the fermenting OM has a mean (± SD) carbon oxidation state (COS) value of -1.4±0.3. This value is much lower than the value of zero expected from carbohydrate fermentation. We conclude that carbohydrates do not adequately represent the fermenting OM in hypolimnetic sediments and propose to include the COS in the formulation of OM fermentation in models applied to lake sediments to better quantify sediment CH4 outflux. This study highlights the potential of mass balancing the products of OM mineralization to characterize labile substrates undergoing fermentation in sediments.