EFFECT OF EDGE DISTANCES ON STIFFNESS OF SHEAR-TENSION MODE IN GLULAM CONNECTIONS WITH INCLINED SCREWS

The effects of edge distances on stiffness in glulam connections with inclined self-tapping screws were studied in this paper. Under four anchorage angles (A-45°, A-60°, A-75°, A-90°) and three edge distances (EG-2D, EG-4D, EG-6D) conditions, the shear-tension tests were carried out on the timber structure connections with inclined self-tapping screws, and the stiffness and other properties of the connections were tested. Based on the results, the effects of edge distances on stiffness in joints were quantified using the equivalent energy elastic-plastic (EEEP) model. The results showed that the edge distances had a certain impact on the yield mode and load-carrying performance of the joints. Within a certain range of variation, as the edge distance increased, the stiffness of the connections increased gradually, showing a positive correlation. The stiffness of specimen EG-2D is 4.41 kN·mm-1. The stiffness of specimen EG-4D is 10.04 kN·mm-1, which increasesby 128% compared with the specimen EG-2D. The stiffness of specimen EG-6D is 12.08 kN·mm-1, which increases by 174% compared with the specimen EG-2D. However, the ductility coefficient, yielding load, and energy dissipatinghave no significant change. Within a reasonable edge distance, only ductile damage occurred.

Variation assessment of yield mode at pressure welding

There are offered ratios for the computation of deformation and power modes of yielding at billet pressure welding. A power method is used for the computation of pressure with reference to a flat discontinuous field of movement speeds. Pressure minimization is carried out in a variation way. The assessment of billet material damageability is shown.