Spherical harmonics to quantify cranial asymmetry in deformational plagiocephaly

Cranial deformation and deformational plagiocephaly (DP) in particular affect an important percentage of infants. The assessment and diagnosis of the deformation are commonly carried by manual measurements that provide low interuser accuracy. Another approach is the use of three-dimensional (3D) models. Nevertheless, in most cases, deformation measurements are carried out manually on the 3D model. It is necessary to develop methodologies for the detection of DP that are automatic, accurate and take profit on the high quantity of information of the 3D models. Spherical harmonics are proposed as a new methodology to identify DP from head 3D models. The ideal fitted ellipsoid for each head is computed and the orthogonal distances between head and ellipsoid are obtained. Finally, the distances are modelled using spherical harmonics. Spherical harmonic coefficients of degree 2 and order − 2 are identified as the correct ones to represent the asymmetry characteristic of DP. The obtained coefficient is compared to other anthropometric deformation indexes, such as Asymmetry Index, Oblique Cranial Length Ratio, Posterior Asymmetry Index and Anterior Asymmetry Index. The coefficient of degree 2 and order − 2 with a maximum degree of 4 is found to provide better results than the commonly computed anthropometric indexes in the detection of DP.

The role of reliable mining and construction analysis in adjudicating mining damage claims

The basis for recognising claims for mining damage to a structure should be a mining and construction analysis, carried out following a detailed visual inspection of the damage and the results of surface deformation measurements. It allows to establish a cause and effect relation between the activity of the mining company and the damage. Unfortunately, there are cases when such an analysis is omitted and the following scheme is used: "since there is damage and the object is located in a mining area, it is mining damage". The problem is illustrated by two court cases where the author acted as an expert witness. Both cases are examples of the so-called pseudo-mining damage and confirm the thesis that the mere image of damage without professional analysis of construction and mining factors may lead to wrong conclusions regarding the causes of the damage.

PIV and deformation measurements on the rotor blade of a rotating, scaled model wind turbine with flexible blades under tailored inflow conditions

Wind turbines face harsh inflow conditions when operating in the atmospheric boundary layer or in the wake of other wind turbines. The incoming velocity field can change within seconds due to the turbulent structures it contains, resulting in a rapid change of several degrees in the angle of attack for the rotating blade. Aerodynamics are hence rapidly altered, leading to changes of the occurring forces on the rotor. Such dynamic forces cause the blades to twist and bend, accelerating fatigue and reducing the lifetime of a turbine Spinato et al. (2009).

Repositioning Error Compensation in Discontinuous Ground-Based SAR Monitoring

The discontinuous mode of ground-based synthetic aperture radar (GB-SAR) is suitable for monitoring creep landslides. However, the instrument needs to be installed and disassembled repeatedly, which could inevitably cause repositioning error, and severely affect the accuracy of deformation measurements. This paper performs a detailed theoretical analysis of the repositioning error based on the Taylor expansion of a ternary function, and it can be built as a linear multi-parameter model. Simulations are made to validate the effectiveness of this model compared with two common first-order and second-order models. Then a compensation method based on the permanent scatterer (PS) technique is proposed. Two experiments of discontinuous monitoring are discussed. The first one is an equivalent discontinuous experiment, which utilizes two corner reflectors to evaluate the compensation accuracy. The other one is a discontinuous experiment taken on a steep mountain. Compared with the common methods, the proposed method can better compensate for the error phase and benefit high-precision deformation monitoring.

Intra-Operative Video-Based Measurement of Biaxial Strains of the Ascending Thoracic Aorta

Local biaxial deformation measurements are essential for the in-depth investigation of tissue properties and remodeling of the ascending thoracic aorta, particularly in aneurysm formation. Current clinical imaging modalities pose limitations around the resolution and tracking of anatomical markers. We evaluated a new intra-operative video-based method to assess local biaxial strains of the ascending thoracic aorta. In 30 patients undergoing open-chest surgery, we obtained repeated biaxial strain measurements, at low- and high-pressure conditions. Precision was very acceptable, with coefficients of variation for biaxial strains remaining below 20%. With our four-marker arrangement, we were able to detect significant local differences in the longitudinal strain as well as in circumferential strain. Overall, the magnitude of strains we obtained (range: 0.02–0.05) was in line with previous reports using other modalities. The proposed method enables the assessment of local aortic biaxial strains and may enable new, clinically informed mechanistic studies using biomechanical modeling as well as mechanobiological profiling.