calcium alginate hydrogel
Recently Published Documents


TOTAL DOCUMENTS

74
(FIVE YEARS 30)

H-INDEX

16
(FIVE YEARS 6)

Foods ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 1521
Author(s):  
Janjira Jinnoros ◽  
Bhundit Innawong ◽  
Patchimaporn Udomkun ◽  
Pramuk Parakulsuksatid ◽  
Juan L. Silva

The effect of the pulsed-vacuum stimulation (PVS) on the external gelation process of calcium-alginate (Ca-Alg) hydrogel balls was studied. The process was conducted at four different working pressures (8, 35, 61, and 101 kPa) for three pulsed-vacuum cycles (one cycle consisted of three repetitions of 10 min of depressurization and 10 min of vacuum liberation). The diffusion coefficients (D) of calcium cations (Ca2+) gradually reduced over time and were significantly pronounced (p < 0.05) at the first three hours of the external gelation process. The rate of weight reduction (WR) and rate of volume shrinkage (Sv) varied directly according to the D value of Ca2+. A significant linear relationship between WR and Sv was observed for all working pressures (R2 > 0.91). An application of a pulsed vacuum at 8 kPa led to the highest weight reduction and shrinkage of Ca-Alg hydrogel samples compared to other working pressures, while 61 kPa seemed to be the best condition. Although all textural characteristics (hardness, breaking deformation, Young’s modulus, and rupture strength) did not directly variate by the level of working pressures, they were likely correlated with the levels of WR and Sv. Scanning electron micrographs (SEM) supported that the working pressure affected the characteristics of Ca-Alg hydrogel structure. Samples stimulated at a working pressure of 8 kPa showed higher deformation with heterogenous structure, large cavities, and looser layer when compared with those at 61 kPa. These results indicate the PVS is a promising technology that can be effectively applied in the external gelation process of Ca-Alg gel.


Membranes ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 435
Author(s):  
Zhao-Yu Ma ◽  
Yu-Ren Xue ◽  
Zhi-Kang Xu

The deepening crisis of freshwater resources has been driving the further development of new types of membrane-based desalination technologies represented by nanofiltration membranes. Solving the existing trade-off limitation on enhancing the water permeance and the rejection of salts is currently one of the most concerned research interests. Here, a facile and scalable approach is proposed to tune the interfacial polymerization by constructing a calcium alginate hydrogel layer on the porous substrates. The evenly coated thin hydrogel layer can not only store amine monomers like the aqueous phase but also suppress the diffusion of amine monomers inside, as well as provide a flat and stable interface to implement the interfacial polymerization. The resultant polyamide nanofilms have a relatively smooth morphology, negatively charged surface, and reduced thickness which facilitate a fast water permeation while maintaining rejection efficiency. As a result, the as-prepared composite membranes show improved water permeance (~30 Lm−2h−1bar−1) and comparable rejection of Na2SO4 (>97%) in practical applications. It is proved to be a feasible approach to manufacturing high-performance nanofiltration membranes with the assist of alginate hydrogel regulating interfacial polymerization.


2021 ◽  
pp. 016173462110186
Author(s):  
Minoru Aoyagi

The ultrasound phantoms used to educate medical students should not only closely mimic the ultrasound characteristics of human soft tissues but also be inexpensive and easy to manufacture. I have been studying handmade ultrasound phantoms and proposed an ultrasound phantom comprising calcium alginate hydrogel that met these requirements but caused a speckle pattern similar to that observed in ultrasound images of liver. In this study, I show that adding ethanol to the precursors used to fabricate the phantom reduces the speckle pattern. The ultrasound propagation velocity and attenuation coefficient of the phantom were 1561 ± 8 m/s and 0.54 ± 0.18 dB/cm/MHz, respectively (mean ± standard deviation), which are within the ranges of those in human soft tissues (1530-1600 m/s and 0.3-1.0 dB/cm/MHz, respectively). This phantom is easy to fabricate without special equipment, is inexpensive, and is suitable for elementary training on ultrasound diagnosis, operation of ultrasound-guided needles, and blind catheter insertion.


2021 ◽  
Author(s):  
Fernando De la Portilla ◽  
Sandra Dios‐Barbeito ◽  
María Victoria Maestre‐Sánchez ◽  
Jorge Manuel Vázquez‐Monchul ◽  
Ana María García‐Cabrera ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document