Miniaturized Interferometric Sensors with Spectral Tunability for Optical Fiber Technology—A Comparison of Size Requirements, Performance, and New Concepts

Optical interferometric sensors have acquired significant importance in metrology and information technology, especially in terms of their potential application in launching size, selectivity, sensitivity, resolution, spectral tuning ranges, efficiency, and cost. However, these demands are often contradictory and counteract one another, and are thus difficult to simultaneously fulfill during their interaction. This review focuses on a detailed comparison of seven different strongly miniaturized sensor concepts investigating the limits of these demands. For the visible and near-infrared spectral range, seven optical sensors were reviewed based on the following methodologies: classical optical transmission and reflection gratings, arrayed waveguide gratings, static Fabry–Pérot (FP) filter arrays, MEMS tunable FP interferometers, MEMS tunable photonic crystals, plasmonic filters, and fiber tip sensors. The comparison between the selected concepts concentrates on (i) the minimum space required for a particular spectral range, (ii) resolution, (iii) the integration in optical fiber technology, (iv) tunability to save space, (v) efficiency in using available light, (vi) multiplexing, (vii) miniaturization limits, and (viii) the potential of nanoimprint for cost reduction. Technologies for enhancing efficiency to obtain more available light and their applicability to the different methodologies were studied.

Binary Amplitude Reflection Gratings for X-ray Shearing and Hartmann Wavefront Sensors

New, high-coherent-flux X-ray beamlines at synchrotron and free-electron laser light sources rely on wavefront sensors to achieve and maintain optimal alignment under dynamic operating conditions. This includes feedback to adaptive X-ray optics. We describe the design and modeling of a new class of binary-amplitude reflective gratings for shearing interferometry and Hartmann wavefront sensing. Compact arrays of deeply etched gratings illuminated at glancing incidence can withstand higher power densities than transmission membranes and can be designed to operate across a broad range of photon energies with a fixed grating-to-detector distance. Coherent wave-propagation is used to study the energy bandwidth of individual elements in an array and to set the design parameters. We observe that shearing operates well over a ±10% bandwidth, while Hartmann can be extended to ±30% or more, in our configuration. We apply this methodology to the design of a wavefront sensor for a soft X-ray beamline operating from 230 eV to 1400 eV and model shearing and Hartmann tests in the presence of varying wavefront aberration types and magnitudes.

Analysis of the Imaging Characteristics of Holographic Waveguides Recorded in Photopolymers

In this work, we study the imaging characteristics of an optical see-through display based on a holographic waveguide. To fabricate this device, two transmission holograms are recorded on a photopolymer material attached to a glass substrate. The role of the holograms is to couple the incident light between air and the glass substrate, accomplishing total internal reflection. The role of noise reflection gratings and shrinkage on the imaging characteristics of the device will be also explored. The holograms (slanted transmission gratings with a spatial frequency of 1690 lines/mm) were recorded on a polyvinyl alcohol acrylamide holographic polymer dispersed liquid crystal (HPDLC) material. We will show that sufficient refractive index modulation is achieved in the material, in order to obtain high diffraction efficiencies. We will demonstrate that the final device acts as an image formation system.

Terahertz Beam Steering Concept Based on a MEMS-Reconfigurable Reflection Grating

With an increasing number of applications of terahertz systems in industrial fields and communications, terahertz beamforming and beam steering techniques are required for high-speed, large-area scanning. As a promising means for beam steering, micro-electro-mechanical system (MEMS)-based reflection gratings have been successfully implemented for terahertz beam control. So far, the diffraction grating efficiency is relatively low due to the limited vertical displacement range of the reflectors. In this paper, we propose a design for a reconfigurable MEMS-based reflection grating consisting of multiple subwavelength reflectors which are driven by 5-bit, high-throw electrostatic actuators. We vary the number of the reflectors per grating period and configure the throw of individual reflectors so that the reflection grating is shaped as a blazed grating to steer the terahertz beam with maximum diffraction grating efficiency. Furthermore, we provide a mathematical model for calculating the radiation pattern of the terahertz wave reflected by general reflection gratings consisting of subwavelength reflectors. The calculated and simulated radiation patterns of the designed grating show that we can steer the angle of the terahertz waves in a range of up to ± 56.4 ∘ with a maximum sidelobe level of −10 dB at frequencies from 0.3 THz to 1 THz.