Progress in Preparation and Research of Water Electrolysis Catalyst for Transition Metal Phosphide

Confronted with growing energy crisis and environmental challenges, water electrolysis for hydrogen production can provide high-density, clean and renewable energy, but limited by sluggish kinetics of two half reaction, anodic oxygen evolution reaction (OER) and cathodic hydrogen evolution reaction(HER). Noble-metal-based electrocatalysts can decrease overpotential and accelerate kinetics dramatically, but limited by its scarcity and high cost. Transitional metal catalysts are abundant, low cost and have potential to become excellent catalyst due to unique electronic structure. Beginning from basic principle of electrocatalysis, this paper focuses on the synthesis method of transitional metal phosphide (TMP), and further discusses modification methods of TMP, including phase tuning, element doping/alloying, interfacial/structural engineering and three-dimensional architecture. Finally, the challenges of TMP are analyzed and future research focuses are prospected.

Catalytic Depolymerization of Date Palm Waste to Valuable C5–C12 Compounds

Lignin depolymerization often requires multiple isolation steps to convert a lignocellulose matrix into high-value chemicals. In addition, lignin structural modification, low yields, and poor product characteristics remain challenges. Direct catalytic depolymerization of lignocellulose from date palm biomass was investigated. Production of high value chemicals heavily depends on optimization of different parameters and method of conversion. The goal of the study was to elucidate the role of different parameters on direct conversion of date palm waste in a bench reactor, targeting valuable C5–C12 compounds. The catalytic performance results demonstrated better liquid yields using a commercial alloy catalyst than with laboratory-prepared transition metal phosphide catalysts made using nickel, cobalt, and iron. According to the gas chromatography-mass spectrometry results, C7–C8 compounds were the largest product fraction. The yield improved from 3.6% without a catalyst to 68.0% with a catalyst. The total lignin product yield was lower without a catalyst (16.0%) than with a catalyst (76.0%). There were substantial differences between the carbon distributions from the commercial alloy catalyst, supported transition metal phosphide catalyst, and catalyst-free processes. This may be due to differences between reaction pathways. Lab-made catalysts cracked the biomass to produce more gases than the alloy catalyst. The final pressure rose from 2 bar at the start of the experiment to 146.15 bar and 46.50 bar after the respective reactions. The particle size, solvent type, time, temperature, gas, and catalytic loading conditions were 180 µm, methanol, 6 h, 300 °C, nitrogen, and 5 wt %, respectively. The results from this study provide a deep understanding of the role of different process parameters, the positive attributes of the direct conversion method, and viability of date palm waste as a potential lignocellulose for production of high-value chemicals.

Cobalt Phosphide (Co2P) with Notable Electrocatalytic Activity Designed for Sensitive and Selective Enzymeless Bioanalysis of Hydrogen Peroxide

In this work, cobalt phosphide nanoparticles (Co2P NPs) were prepared by simple and mild hydrothermal method without the use of harmful phosphorous source. The morphological structure and surface component of Co2P were characterized by transmission electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy measurements. Considering the excellent electrocatalytic reduction activity and good electrical conductivity of transition-metal phosphide, we fabricated Co2P NPs on indium tin oxide (ITO) substrate (Co2P/ITO) for H2O2 detection. The Co2P/ITO transducer displayed a rapid amperometric response less than 5 s, a broader response range from 0.001 to 10.0 mM and a low detection limit of 0.65 μM. In addition, the non-enzymatic Co2P/ITO sensor showed outstanding selectivity, reproducibility, repeatability and stability, all of which qualified the Co2P/ITO electrode for quite a reliable and promising biosensor for H2O2 sensing.

Sacrificial Species Approach to Designing Robust Transition Metal Phosphide Cathodes for Alkaline Water Electrolysis in Discontinuous Operation

The degradation of amorphous cobalt phosphides (CoPx) as electrocatalyst for hydrogen evolution reaction (HER) is studied in the discontinuous operation of alkaline water electrolysis cells (AWEs). Although amorphous CoPx shows...