Effects of Crop Geometry and Nutrient Management On Nutrient Uptake and Quality Parameters of Potato Under Winter Maize + Potato Intercropping System

Effects of crop geometry and nutrient management on nutrient uptake and quality parameters of potato under winter maize + potato intercropping system were studied during two consecutive years (2015-2016 and 2016-17) at BHU, Varanasi, India. Results revealed that under different crop geometry the nutrient uptake (NPK kg/ha) were obtained significantly higher with 1 : 2 row ratio in additive series as compared to other row ratio due to maximum plant population. The minimum nutrient uptake (NPK kg/ha) were obtained with 1:1 row ratio in replacement series. However, quality parameters (protein and starch) did not vary significantly by different crop geometry during both the years of investigation. Amongst nutrient management, the highest nutrient uptake (NPK kg/ha) and quality parameters (protein and starch) were obtained significantly with the application of 100% RDF + 25% N through poultry manure followed by the application of 100% RDF + 25% N through vermicompost. Thus, the results suggest that 1:2 row ratio (crop geometry) in additive series with 100% RDF + 25% N through poultry manure (nutrient management) followed by 100% RDF + 25 % N through vermicompost were feasible and practicable during both the years of investigations. Bangladesh J. Bot. 50(4): 1011-1019, 2021 (December)

Effect of Varieties and Crop Geometries on Yield and Profitability of Soybean in Semi – Arid Climate of Telangana

A field study entitled ʻʻEvaluation of varieties at varied crop geometry for yield maximization in soybeanʼʼ was conducted at College farm, Agricultural College, Polasa, Jagtial, PJTSAU, during the kharif season of 2018. The experiment was laid out in split-plot design with three replications to evaluate the performance of promising varieties of soybean (V1- Basar, V2- JS 335, V3- KDS 756 and V4- MACS 1281) and to standardize the crop geometry for Soybean varieties (S1- 45 x 10 cm, S2- 30 x 10 cm, S3- 45 x 05 cm and S4- 35 x 05 cm) under rainfedsemi arid conditions of Telangana. The results obtained from the present experiment indicated that among the varieties the yield attributes and yield are numbers of pods plant-1, number of seeds pod-1, seed yield, stalk yield and harvest index (%) and monetary returns of KDS 756 variety was significantly higher as compared to other varieties followed by Basar, MACS 1281, respectively. Hundred seed weight was significant among varieties and was higher with variety KDS 756 followed by MACS 1281, JS 335 and Basar. JS 335 showed inferior performance regarding yield attributes yield and monetary returns. Among crop geometry 30 x 10 cm recorded higher yield characters and monetary returns followed by 45 x 05 cm, 30 x 05 cm and 45 x 10 cm, respectively.

Effect of Foliar Nutrition and Crop Geometry on Cultivars of Blackgram in Shiwalik Foothills of Jammu

Background: Rapid expansion in population increased the global food demand. To meet this surge in demand for food and to ensure food and nutritional security addition of pulses in the cropping system is a visible alternative. Pulses intensifies cropping intensity, enhances health and fertility status of the soil and acts as a good source of dietary protein etc. However, due to a wide gap between the potential and actual yield of pulses in rainfed areas. Hence, identification and adoption of best management practices has become a pre-requisite. The present study was undertaken as the information available on foliar nutrition and different crop geometries on performance of different blackgram genotypes in rainfed condition is meagre. Methods: In this investigation conducted during kharif season of 2018 at Advanced Centre for Rainfed Agriculture, SKUAST-Jammu, Rakh Dhiansar. The experiment was laid out in factorial randomized block design with 3 factors and 3 replications. The factor-1 consisted of three blackgram cultivars (Uttara, PU-31 and Mash-114), factor 2 consisted of two crop geometries (30×10 cm and 45×10 cm) and factor-3 consisted of three foliar nutrition (Foliar spray of molybdenum as sodium molybdate @ 0.1% at 20 DAS, Foliar spray of 1.5% KCl at flowering and Foliar spray of molybdenum as sodium molybdate @ 0.1% at 20 DAS fb 1.5% KCl at flowering). Result: The results from the present investigation indicated that adoption of Mash-114 at 30×10 cm crop geometry, supplemented with foliar application of molybdenum as sodium molybdate @ 0.1% at 20 DAS fb 1.5% KCl at flowering could be a viable technological proposition under rainfed conditions of Jammu.

Production Potential of Pigeon Pea [Cajanus cajan (L.) Millsp.] as Influenced by Crop Geometry and Plant Growth Regulators

Background: Pigeonpea being highly branching and indeterminate growth habit responds very well to crop geometry. Hence to achieve potential yields, it is important to maintain optimum plant population which can effectively utilize available moisture, nutrients and solar radiation. The plant growth regulators are also known to enhance the source sink relationship and stimulate the translocation of photo assimilates, thereby increase the productivity. Methods: A field experiment was conducted at experimental farm of Agronomy Department, V.N.M.K.V., Parbhani during kharif season of 2018 and 2019. The experiment was laid out in split plot design with four main plot treatments comprised of four crop geometries as 90 cm x 20 cm, 120 cm x 20 cm 60-120 cm x 20 cm and 75-150 cm x 20 cm and sub plot treatments were five treatments on foliar application of plant growth regulators i.e. NAA @ 40 ppm, Mepiquat chloride @ 50 g a.i. ha-1, Brassinosteroids @ 0.1 ppm, Chlormequat Chloride @ 75 g a.i ha-1 and control. Result: The crop geometry of 120 cm x 20 cm and 75-150 cm x 20 cm recorded higher values of all yield parameters followed by crop geometry of 60-120 cm x 20 cm. While the seed, straw and biological yield of pigeonpea as well as highest net realization of Rs. 72072 ha-1 was obtained with crop geometry of 60-120 cm x 20 cm followed by 90 cm x 20 cm. Among the plant growth regulators foliar application of Brassinosteroids @ 0.1 ppm (G3) tended to recorded higher yield parameters, seed yield and fertility coefficient of pigeonpea as well as highest net realization followed by foliar application of NAA @ 40 ppm.

Crop Geometry and Nitrogen Levels Influence on Growth, Yield and Economics of Compact Cotton (Gossypium hirsutum L.) in Rainfed Vertisols

Aims: To study the effect of crop geometry and nitrogen levels on compact cotton genotype in rainfed vertisols condition. Study Design: The experiment was laid out in a randomized block design with a factorial concept with 3 levels of crop geometry and four levels of nitrogen with 12 treatment combinations and replicated thrice. Place and Duration of Study: A field experiment was conducted on vertisols under rainfed conditions at Regional Agricultural Research Station Lam, Guntur during the year 2018 – 2019. Methodology: The treatments consisted of three crop geometries S1 – 60 cm × 10 cm, S2- 75 cm × 10 cm, S3- 90 cm × 45 cm in combination with four nitrogen levels N1- 45kg N ha-1, N2- 90kg N ha-1, N3- 135 kg N ha-1, N4- 180 kg ha-1. Results: Closer crop geometry of 60 cm × 10 cm recorded taller plants and maximum dry matter accumulation, functional leaves per square meter, leaf area index, maximum chlorophyll content, number of bolls per square meter and seed cotton yield per ha-1, net returns and returns per rupee. However, the number of sympodial branches per plant and sympodial length was highest with wider crop geometry of 90 cm × 45 cm. All the growth and yield parameters recorded were maximum with the application of 180Kg N ha-1 than all the other levels of nitrogen tested. Conclusion: Overall, the results showed that the Crop geometry of 60cm × 10 cm with application of 135 kg N ha-1 was found to be optimum to realize of maximum seed cotton yield and net returns.

Characterization of Gladiolus Genotypes under Khumaltar Condition of Nepal

Seven promising genotypes of Gladiolus were experimented during the two consecutive years of 2014/15 and 2015/16 in the field of Horticulture Research Division, Khumaltar, Lalitpur (1332 masl) to evaluate the performances of their vegetative, floral and corm characteristics. The experiment was laid out in Randomized Complete Block Design with four replications. The treatments consisted of seven genotypes (ARSDG-01, ARSDG-02, ARSDG-03, ARSDG-04, ARSDG-05, ARSDG-06 and ARSDG-07). Fifty-four corms of each genotype were planted in the crop geometry of 25 x 25 cm. A total of sixteen characters were observed. The pooled results of two years data indicated significantly different except plant height, spike length, rachis length, number of cormels per mother corm and individual corm weight due to the effects of seven evaluated genotypes. Genotype ARSDG-04 was proven as the earliest one for days to the first spike emergence (73.00 days), the full spike emergence (76.50 days) and the first unfurling of florets (83 days). In contrast, ARSDG-01 and ARSDG-06 were late genotypes for the same three characters. The number of florets/spikes was considerably high in two genotypes viz., ARSDG-06 (21.00) and ARSDG-03 (20.50). The number of daughter corms/mother corm was significantly high in ARSDG-05 (3.10) and ARSDG-04 (2.92) whereas it was minimally low in ARSDG-02 (1.66) and ARSDG-07 (1.69). Summing up all sixteen characters of evaluated genotypes, ARSDG-04 as the first, ARSDG-05 as the second and ARSDG-03 as the third have respectively emerged as superior ones as opposed by those of the rest of evaluated genotypes of Gladiolus.