Antibacterial and Biodegradable Electrospun Filtering Membranes for Facemasks: An Attempt to Reduce Disposable Masks Use

Due to the prevalence of the COVID-19 pandemic, the demand for disposable facemasks has become a global issue. Unfortunately, the use of these products has negative effects on the environment, and therefore, the use of biodegradable materials is a powerful strategy to overcome this challenge. Aligned with this concept, in this work, biodegradable facemasks were developed using poly(ε-caprolactone) (PCL) polymer and cotton natural fibers. The filter layer was produced using an electrospinning technique, since electrospun membranes present remarkable characteristics for air filtration. The electrospun membranes were functionalized with different nanoparticles (NPs), including silver (Ag), titanium dioxide (TiO2) and magnesium oxide (MgO), in order to include new properties, namely antibacterial effect. The developed membranes were characterized by FESEM, EDS, ATR-FTIR, GSDR and TGA, which confirmed the successful impregnation of NPs onto PCL membranes. The antibacterial effect and filtration efficiency were assessed, with the PCL/MgO NPs membrane presenting better results, showing inhibition zone diameters of 25.3 and 13.5 mm against Gram-positive and Gram-negative bacteria, respectively, and filtration efficiency of 99.4%. Three facemask prototypes were developed, and their filtration efficiency, air permeability and thermal comfort were evaluated. Overall, this study demonstrates the potential of PCL/NPs electrospun membranes to act as an active and biodegradable filter layer in facemasks.

Infection Prevention Mask Consisting of Nanofiber Filter and Habutae Silk Fabrics

To reduce skin irritation and allergic symptoms caused by long-term mask use, we produced a mask with a filter effect by laminating nanofibers on habutae silk fabric, a specialty of Japan’s Fukui Prefecture, using the electrospinning method. We investigated the filter characteristics of silk fabrics with different weave structures (habutae, flat crepe, and twill). We found that woven fabrics alone could not sufficiently block particles finer than 1 μm, even when the fabric layers were overlapped. Therefore, we had a nanofiber filter layer fabricated on the surface of habutae fabric by the electrospinning method at a weight of 1 g/m2. The nanofibers removed more than 94% of 0.3 μm-particles, which are similar to the size of virus particles. However, the nanofiber layer was so dense that it caused an increase in pressure drop, so we made the nanofiber layer thinner and fabricated the filter on the surface of the habutae fabric at 0.5 g/m2. A three-dimensional mask consisting of two woven fabrics, one with a nanofiber layer on the inside and the other with a normal woven fabric without a nanofiber layer on the outside, was fabricated and tested on 95 subjects. The subjects reported that the nanofiber habutae masks were more comfortable than nonwoven masks. Moreover, the silk woven masks did not cause allergic symptoms such as skin irritation.

TRIBOLOGICAL ASPECT OF ASSESSMENT OF EFFICIENCY OF FILTRATION USING MULTI-LAYER MATERIALS

This study presents the results of testing for the efficiency and effectiveness of filtration using multi-layer filter materials, and briefly presents a new technology for manufacturing filter media using these materials. The first part of the article describes the causes of the formation of impurities in operating fluids and the tribological effects of their impact. The second part is dedicated to testing for filtration efficiency and effectiveness for different filter materials. The third part of the article briefly describes the technology for manufacturing filter media using efficient but difficult-to-form materials. The testing results showed significant differences in filtering efficiency and effectiveness between the cellulose samples and the samples of filter materials based on glass microfibre layers. All of the tested multi-layer materials allow filtration effectiveness of over 90% to be achieved over the entire range of impurity sizes included in the experiment. The results of a comparative test for pressure change during filtration also indicate that glass microfibre materials have a considerably longer operating life than cellulose materials. The time after which a sharp increase in pressure occurs (due to the filter layer being filled with impurities) is nearly four times longer for multi-layer materials than for cellulose materials. The methods for cutting, forming, and joining filter materials have been developed by the author of this article and implemented at the EXMOT company.

Research on Generation Method of Grasp Strategy Based on DeepLab V3+ for Three-Finger Gripper

A reasonable grasping strategy is a prerequisite for the successful grasping of a target, and it is also a basic condition for the wide application of robots. Presently, mainstream grippers on the market are divided into two-finger grippers and three-finger grippers. According to human grasping experience, the stability of three-finger grippers is much better than that of two-finger grippers. Therefore, this paper’s focus is on the three-finger grasping strategy generation method based on the DeepLab V3+ algorithm. DeepLab V3+ uses the atrous convolution kernel and the atrous spatial pyramid pooling (ASPP) architecture based on atrous convolution. The atrous convolution kernel can adjust the field-of-view of the filter layer by changing the convolution rate. In addition, ASPP can effectively capture multi-scale information, based on the parallel connection of multiple convolution rates of atrous convolutional layers, so that the model performs better on multi-scale objects. The article innovatively uses the DeepLab V3+ algorithm to generate the grasp strategy of a target and optimizes the atrous convolution parameter values of ASPP. This study used the Cornell Grasp dataset to train and verify the model. At the same time, a smaller and more complex dataset of 60 was produced according to the actual situation. Upon testing, good experimental results were obtained.

IMPLEMENASI BLOCK ACCESS PENGGUNA LAYANAN INTERNET DENGAN METODE FILTER RULE dan LAYER 7 PROTOCOL

PT MNC Televisi Network (Inews) merupakan stasiun tv swasta yang jaringannya menggunakan topologi tree. Penelitian yang telah dilakukan di PT MNC Televisi Network ini akan memaanfatkan fitur fitur yang ada pada router Mikrotik untuk mengatasi permasalahan keamanan jaringan di PT MNC Televisi Network. Dengan berkembangnya zaman akses internet yang disediakan oleh tempat kerja memunculkan masalah terkait penggunaan internet untuk kepentingan pribadi, seperti bermain game online pada saat bekerja atau bermain sosial media. Untuk menangani permasalahan ini peneliti memblokir trafic – tarfic dari situs2 yang tidak ada hubungan nya dengan kinerja perusahaan itu dengan menggunakan fitur yang ada pada router Mikrotik yaitu filter rule dan filter layer 7 protokol. Dan menambahkan hotspot untuk memonitoring akses wifi yang ada di perusahaan. Dengan di manfaatkannya beberapa fitur yang ada di router Mikrotik bisa membuat jam kerja di PT MNC Televisi Network lebih teratur dan membuat para karyawan tidak lagi bermain game online dan sosial media di jam kerja. Dengan tidak adanya karyawan bermain game online dan sosial media dapat memaksimalkan efektifitas waktu dalam bekerja Kata kunci: Mikrotik,Filter layer 7 protokol,Filter rule

Screening of core filter layer for the development of respiratory mask to combat COVID-19

The severe outbreak of respiratory coronavirus disease 2019 has increased the significant demand of respiratory mask and its use become ubiquitous worldwide to control this unprecedented respiratory pandemic. The performance of a respiratory mask depends on the efficiency of the filter layer which is mostly made of polypropylene melt blown non-woven (PP-MB-NW). So far, very limited characterization data are available for the PPE-MB-NW in terms to achieve desired particulate filtration efficiency (PFE) against 0.3 µm size, which are imperative in order to facilitate the right selection of PP-MB-NW fabric for the development of mask. In present study, eight different kinds of PP-MB-NW fabrics (Sample A–H) of varied structural morphology are chosen. The different PP-MB-NW were characterized for its pore size and distribution by mercury porosimeter and BET surface area analyzer was explored first time to understand the importance of blind pore in PFE. The PP-MB-NW samples were characterized using scanning electron microscopy so as to know the surface morphology. The filtration efficiency, pressure drop and breathing resistance of various PP-MB-NW fabric samples are investigated in single and double layers combination against the particle size of 0.3, 0.5 and 1 µm. The samples which are having low pore dia, high solid fraction volume, and low air permeability has high filtration efficiency (> 90%) against 0.3 µm particle with high pressure drop (16.3–21.3 mm WC) and breathing resistance (1.42–1.92 mbar) when compared to rest of the samples. This study will pave the way for the judicial selection of right kind of filter layer i.e., PP-MB-NW fabric for the development of mask and it will be greatly helpful in manufacturing of mask in this present pandemic with desired PFE indicating considerable promise for defense against respiratory pandemic.

Outward and inward protections of different mask designs for different respiratory activities

We evaluate the outward and inward protections of different mask types (N95, surgical and two cloth mask designs) taking into account the imperfect fit on the wearer. To this end, we built a manikin to simulate exhaling, coughing and inhaling of aerosol droplets 0.3-5.0 um in diameters. The outward and inward protections depend on many factors, including the droplet size, the mask fit and the presence of a filter layer. Here, we show that cloth and surgical masks with a non-woven filter layer can achieve a combined outward and inward protections between 50% and 90%. Removing the filter layer greatly reduces the protection efficiency to below 20% for the smallest droplet size. While a well-fitted N95 masks offer protection efficiency close to 100%, a poorly fitted N95 mask with gaps offers less protection than a well-fitted surgical/cloth mask. We also found that double masking or the wearing of cloth mask on top of a surgical mask is only effective at reducing outward droplet emissions when coughing, while offering no additional protection when exhaling/inhaling as compared to a single cloth/surgical mask. The results of our work can inform the implementation of mask mandates to minimize airborne transmissions of coronavirus disease of 2019 (COVID-19).