scholarly journals The Bioassay Guided Screening of Cryptolepis Extracts for Onward Synthesis of Nano Ferrites

2021 ◽  
Vol 2 (4) ◽  
pp. 34-39
Author(s):  
Hafza Murtaza ◽  
Aasia Sikander ◽  
Umema Murtaza ◽  
Ashir Masroor ◽  
Filza Ghafoor
Keyword(s):  
Electron Microscopy ◽  
Amino Acids ◽  
Scanning Electron Microscopy ◽  
Ethyl Acetate ◽  
Plant Extracts ◽  
Retention Time ◽  
X Ray ◽  
Nickel Zinc ◽  
Organic Extracts ◽  
Scanning Electron

In this study, various leaves and stem organic extracts were prepared using the solvents viz., n-hexane, ethyl acetate, ethanol and water, separately. Different phytochemical test for alkaloids, carbohydrates, oils, amino acids and others were performed to determine their presence in the extracts. These plant extracts were used for screening of sample via UV and HPLC techniques to compare the wavelength and absorbance, and retention time on chromatogram by extracts, respectively. The surface properties and size of nickel-zinc nano ferrites were evaluated by Energy-dispersive X-ray spectroscopy (EDX) and Scanning Electron Microscopy (SEM). The former, showed the presence of nickel (Ni) and zinc (Zn) weighing 4.27⁒ of N ,6.89⁒ of C and 35.5⁒ of O in the sample which confirmed the presence of nano ferrites in leaves and stem of C. buchanani.

scholarly journals Bioassay Guided Screening of Cryptolepis Extracts for Onward Synthesis of Nano Ferrites

2021 ◽  
pp. 68-74
Author(s):  
Hafza Murtaza ◽  
Aasia Sikander ◽  
Umema Murtaza ◽  
Ashir Masroor ◽  
Filza Ghafoor
Keyword(s):  
Electron Microscopy ◽  
Amino Acids ◽  
Scanning Electron Microscopy ◽  
Ethyl Acetate ◽  
Plant Extracts ◽  
X Ray ◽  
Nickel Zinc ◽  
Organic Extracts ◽  
Scanning Electron ◽  
Ethyl Acetate Extracts

A study was designed to investigate the presence of nanoferrites in Cryptolepis buchanani. In this study, various leaves and stem organic extracts were prepared separately using the solvents viz., n-hexane, ethyl acetate, ethanol and water. Different phytochemical tests for alkaloids, carbohydrates, oils, amino acids and others were performed to determine their presence in the extracts. These plant extracts were used for screening of sample via UV and HPLC techniques to compare the wavelength and absorbance, and retention time on chromatogram by extracts, respectively. The results showed the presence of alkaloids, carbohydrates and proteins in all the samples. However, other compounds were present randomly. Spectroscopy showed highest peaks with ethyl acetate extracts and the lowest with water. The surface properties and size of nickel-zinc nano ferrites were evaluated by Energy-dispersive X-ray spectroscopy (EDX) and Scanning Electron Microscopy (SEM). The former, showed the presence of nickel (Ni) and zinc (Zn) weighing 4.27⁒ of N ,6.89⁒ of C and 35.5⁒ of O in the sample which confirmed the presence of nano ferrites in leaves and stem of C. buchanani.

Identification of calcium oxalate crystals in dried or fixed tobacco leaf

1984 ◽  
Vol 42 ◽  
pp. 288-289
Author(s):  
Vicki L. Baliga ◽  
Mary Ellen Counts
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Calcium Oxalate ◽  
Growth And Development ◽  
Polarized Light ◽  
Calcium Oxalate Crystals ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Calcium is an important element in the growth and development of plants and one form of calcium is calcium oxalate. Calcium oxalate has been found in leaf seed, stem material plant tissue culture, fungi and lichen using one or more of the following methods—polarized light microscopy (PLM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and x-ray diffraction.Two methods are presented here for qualitatively estimating calcium oxalate in dried or fixed tobacco (Nicotiana) leaf from different stalk positions using PLM. SEM, coupled with energy dispersive x-ray spectrometry (EDS), and powder x-ray diffraction were used to verify that the crystals observed in the dried leaf with PLM were calcium oxalate.

Scanning Electron Microscopy and X-Ray Analyses of Dental Tissues from a Hibernator

1976 ◽  
Vol 34 ◽  
pp. 178-179
Author(s):  
M. L. Zimny ◽  
A. C. Haller
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Body Temperature ◽  
Ground Squirrel ◽  
Alveolar Bone ◽  
X Ray ◽  
Dental Tissues ◽  
Bone Minerals ◽  
Apical Tooth ◽  
Scanning Electron

During hibernation the ground squirrel is immobile, body temperature reduced and metabolism depressed. Hibernation has been shown to affect dental tissues varying degrees, although not much work has been done in this area. In limited studies, it has been shown that hibernation results in (1) mobilization of bone minerals; (2) deficient dentinogenesis and degeneration of alveolar bone; (3) presence of calculus and tears in the cementum; and (4) aggrevation of caries and pulpal and apical tooth abscesses. The purpose of this investigation was to study the effects of hibernation on dental tissues employing scanning electron microscopy (SEM) and related x-ray analyses.

Scanning Electron Microscopy and x-ray analysis of microparticles and early hydration effects

1995 ◽  
Vol 53 ◽  
pp. 692-693
Author(s):  
Yun Lu ◽  
David C. Joy
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
High Resolution ◽  
Morphological Development ◽  
Early Hydration ◽  
X Ray ◽  
Blended Cements ◽  
Powder Particles ◽  
Chemical Wastes ◽  
Scanning Electron

High resolution scanning electron microscopy (SEM) and energy dispersive x-ray analysis (EDXA) were performed to investigate microparticles in blended cements and their hydration products containing sodium-rich chemical wastes. The physical appearance of powder particles and the morphological development at different hydration stages were characterized by using high resolution SEM Hitachi S-900 and by SEM S-800 with a EDX spectrometer. Microparticles were dispersed on the sample holder and glued by 1% palomino solution. Hydrated bulk samples were dehydrated by acetone and mounted on the holder by silver paste. Both fracture surfaces and flat cutting sections of hydrating samples were prepared and examined. Some specimens were coated with an 3 nm thick Au-Pd or Cr layer to provide good conducting surfaces. For high resolution SEM S-900 observations the accelerating voltage of electrons was 1-2 KeV to protect the electron charging. Microchemical analyses were carried out by S800/EDS equipped with a LINK detector of take-off angle =40°.

Defects of Platelet Function Recognized by X-Ray Imaging and Scanning Electron Microscopy

1985 ◽  
Vol 43 ◽  
pp. 610-613
Author(s):  
M.G. Baldini ◽  
S. Morinaga ◽  
D. Minasian ◽  
R. Feder ◽  
D. Sayre ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Cell Biology ◽  
Imaging Technique ◽  
Human Platelets ◽  
X Rays ◽  
X Ray ◽  
X Ray Imaging ◽  
Complex Phenomena ◽  
Scanning Electron

Contact X-ray imaging is presently developing as an important imaging technique in cell biology. Our recent studies on human platelets have demonstrated that the cytoskeleton of these cells contains photondense structures which can preferentially be imaged by soft X-ray imaging. Our present research has dealt with platelet activation, i.e., the complex phenomena which precede platelet appregation and are associated with profound changes in platelet cytoskeleton. Human platelets suspended in plasma were used. Whole cell mounts were fixed and dehydrated, then exposed to a stationary source of soft X-rays as previously described. Developed replicas and respective grids were studied by scanning electron microscopy (SEM).

Environmental scanning electron microscopy of fresh human gallstones reveals new morphologies of precipitated calcium salts

1992 ◽  
Vol 50 (2) ◽  
pp. 1322-1323
Author(s):  
Howard S. Kaufman ◽  
Keith D. Lillemoe ◽  
John T. Mastovich ◽  
Henry A. Pitt
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Environmental Scanning Electron Microscopy ◽  
Environmental Scanning ◽  
X Ray Diffraction ◽  
Calcium Salts ◽  
Cholesterol Gallstones ◽  
X Ray ◽  
Ca Carbonate ◽  
Scanning Electron

Gallstones contain precipitated cholesterol, calcium salts, and proteins. Calcium (Ca) bilirubinate, palmitate, phosphate, and carbonate occurring in gallstones have variable morphologies but characteristic windowless energy dispersive x-ray (EDX) spectra. Previous studies of gallstone microstructure and composition using scanning electron microscopy (SEM) with EDX have been limited to dehydrated samples. In this state, Ca bilirubinates appear as either glassy masses, which predominate in black pigment stones, or as clusters, which are found mostly in cholesterol gallstones. The three polymorphs of Ca carbonate, calcite, vaterite, and aragonite, have been identified in gallstones by x-ray diffraction, however; the morphologies of these crystals vary in the literature. The purpose of this experiment was to study fresh gallstones by environmental SEM (ESEM) to determine if dehydration affects gallstone Ca salt morphology.Gallstones and bile were obtained fresh at cholecystectomy from 6 patients. To prevent dehydration, stones were stored in bile at 37°C. All samples were studied within 4 days of procurement.

PENINGKATAN LAJU DISOLUSI ACYCLOVIR DENGAN METODE SISTEM DISPERSI PADAT MENGGUNAKAN POLOXAMER 188

2016 ◽  
Vol 5 (1) ◽  
pp. 6
Author(s):  
Budi Setiawan ◽  
Erizal Zaini ◽  
Salman Umar
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Differential Thermal Analysis ◽  
Fourier Transform Infrared ◽  
X Ray Diffraction ◽  
Poloxamer 188 ◽  
X Ray ◽  
Scanning Electron

Sebuah penelitian tentang sistem dispersi padat dari asiklovir dengan poloxamer 188 telah dilakukan formulasi dengan pencampuran secara fisika dengan rasio 1 : 1, 1 : 3, 1 : 5 dan dispersi padat 1 : 1, 1 : 3, 1 : 5 dan penggilingan 1:1 sebagai pembanding. Dispersi padat dibuat menggunakan metode pencairan (fusi), yang digabung dengan poloxamer 188 pada hotplate kemudian asiklovir dimasukkan ke dalam hasil poloxamer 188 lalu di kocok hingga membentuk masa homogen. Semua formula yang terbentuk termasuk asiklovir poloxamer 188 murni dianalisis karakterisasinya dengan Differential Thermal Analysis (DTA), X-ray Diffraction, Scanning Electron Microscopy (SEM), dan Fourier Transform Infrared (FTIR), kemudian pengambilan dilakukan  (penentuan kadar) mengunakan spektrofotometer UV pada panjang gelombang 257,08 nm dan uji laju disolusi dengan aquadest bebas CO2 menggunakan metode dayung. Hasil pengambilan  (penentuan kadar) menunjukkan bahwa semua formula memenuhi persyaratan farmakope Amerika edisi 30 dan farmakope Indonesia edisi 4 yaitu 95-110%. Sedangkan hasil uji laju disolusi untuk campuran fisik 1: 1, dan dispersi padat 1: 1, dan penggilingan 1: 1 menunjukkan peningkatan yang nyata dibandingkan asiklovir murni. Hal ini juga dapat dilihat dari hasil perhitungan statistik  menggunakan analisis varian satu arah  SPSS 17.

Human Dentine Remineralization Under Non-colagen Materials Action

2017 ◽  
Vol 68 (5) ◽  
pp. 928-932
Author(s):  
Agripina Zaharia ◽  
Viorica Ghisman Plescan ◽  
Elena Maria Anghel ◽  
Viorica Musat
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Artificial Saliva ◽  
Composite Layer ◽  
X Ray ◽  
Micro Raman Spectroscopy ◽  
Agarose Hydrogel ◽  
Human Dentine ◽  
Dentine Surface ◽  
Scanning Electron

The purpose of this work is to induce biomimetic remineralization of acid etched coronal human dentine in artificial saliva (AS) under agarose (A) hydrogel or chitosan (CS)-A hydrogel action. The investigations focused on the morphology, chemical composition and crystalline structure of the new remineralized layers grown onto the etched dentinal surface (R) using scanning electron microscopy coupled with energy dispersive X-ray spectrometry and micro-Raman spectroscopy. Experimental results showed that remineralized layers grown in the presence of A or CS-A hydrogels consist in B-type Ca-deficient hydroxyapatite (HAP). After 7 days treatment into artificial saliva under agarose hydrogel, nanorod-like extrafibrilar HAP crystals randomly self-assembled in a discontinuous layer were formed, while in presence of chitosan-agarose hydrogel a continuous compact CS-HAP composite layer was obtained. The new biomimetic layer (A-CS4) formed after 4 days on dentine surface under A-CS hydrogel has higher crystallinity. Longer exposed (7 days) dentine in the presence of agarose hydrogel shows a higher mineral-to-collagen ratio (A7). Since dentine mineralization increases, the collagen quality factor decreases in succession A-CS4]R]A7. Results show a benefic effect of chitosan on remineralization of etched dentine.

Sign in / Sign up

Export Citation Format

Share Document