Planar CH3NH3PbBr3Hybrid Solar Cells with 10.4% Power Conversion Efficiency, Fabricated by Controlled Crystallization in the Spin-Coating Process

2014 ◽  
Vol 26 (48) ◽  
pp. 8179-8183 ◽  
Author(s):  
Jin Hyuck Heo ◽  
Dae Ho Song ◽  
Sang Hyuk Im
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Spin Coating ◽  
Power Conversion ◽  
Coating Process ◽  
Spin Coating Process ◽  
Controlled Crystallization

scholarly journals Simultaneous spin-coating and solvent annealing: manipulating the active layer morphology to a power conversion efficiency of 9.6% in polymer solar cells

2015 ◽  
Vol 2 (6) ◽  
pp. 592-597 ◽  
Author(s):  
Zhicai He ◽  
Feng Liu ◽  
Cheng Wang ◽  
Jihua Chen ◽  
Lilin He ◽  
...  
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Active Layer ◽  
Conversion Efficiency ◽  
Spin Coating ◽  
Polymer Solar Cells ◽  
Power Conversion ◽  
Solvent Annealing

We demonstrate spin coating together with solvent annealing, which can be used to tune the morphology of the BHJ active layer and thus enhance device performances.

scholarly journals Effects of Preheating Treatments on the Performance of Perovskite Solar Cells

2022 ◽  
Vol 2160 (1) ◽  
pp. 012036
Author(s):  
Haoyu Wang ◽  
Junjie Yang ◽  
Xiaodong Liu ◽  
Shuanghong Wu ◽  
Xiangru Wang
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Spin Coating ◽  
High Performance ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Great Influence ◽  
Precursor Solution ◽  
Processing Parameters

Abstract Perovskite solar cells (PSCs) have fascinated widespread focus for prominent perfomances recently. The processing parameters in spin-coating have great influence on the efficiency of PSCs. Herein, we have researched the influence of different preheating treatments on the perfomance of PSCs. The power conversion efficiency (PCE) has a significant enhancement to 15.89% through preheating the substrate together with precursor solution simultaneously. This work promotes the development of high performance PSCs and their industrialization.

A thiourea additive-based quadruple cation lead halide perovskite with an ultra-large grain size for efficient perovskite solar cells

Nanoscale ◽  
2019 ◽  
Vol 11 (45) ◽  
pp. 21824-21833 ◽  
Author(s):  
Jyoti V. Patil ◽  
Sawanta S. Mali ◽  
Chang Kook Hong
Keyword(s):  
Thin Films ◽  
Grain Size ◽  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Inorganic Perovskite ◽  
Halide Perovskite ◽  
Lead Halide

Controlling the grain size of the organic–inorganic perovskite thin films using thiourea additives now crossing 2 μm size with >20% power conversion efficiency.

The Effect of Donor Molecular Structure on Power Conversion Efficiency of Small-Molecule-Based Organic Solar Cells

2019 ◽  
Vol 16 (3) ◽  
pp. 236-243 ◽  
Author(s):  
Hui Zhang ◽  
Yibing Ma ◽  
Youyi Sun ◽  
Jialei Liu ◽  
Yaqing Liu ◽  
...  
Keyword(s):  
Molecular Structure ◽  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Small Molecule ◽  
Organic Solar Cells ◽  
Molecular Design ◽  
Power Conversion ◽  
The Relationship

In this review, small-molecule donors for application in organic solar cells reported in the last three years are highlighted. Especially, the effect of donor molecular structure on power conversion efficiency of organic solar cells is reported in detail. Furthermore, the mechanism is proposed and discussed for explaining the relationship between structure and power conversion efficiency. These results and discussions draw some rules for rational donor molecular design, which is very important for further improving the power conversion efficiency of organic solar cells based on the small-molecule donor.

scholarly journals High performance tandem organic solar cells via a strongly infrared-absorbing narrow bandgap acceptor

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Zhenrong Jia ◽  
Shucheng Qin ◽  
Lei Meng ◽  
Qing Ma ◽  
Indunil Angunawela ◽  
...  
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Organic Solar Cells ◽  
High Performance ◽  
Short Circuit ◽  
Power Conversion ◽  
High Power Conversion Efficiency ◽  
Device Structure ◽  
Narrow Bandgap

AbstractTandem organic solar cells are based on the device structure monolithically connecting two solar cells to broaden overall absorption spectrum and utilize the photon energy more efficiently. Herein, we demonstrate a simple strategy of inserting a double bond between the central core and end groups of the small molecule acceptor Y6 to extend its conjugation length and absorption range. As a result, a new narrow bandgap acceptor BTPV-4F was synthesized with an optical bandgap of 1.21 eV. The single-junction devices based on BTPV-4F as acceptor achieved a power conversion efficiency of over 13.4% with a high short-circuit current density of 28.9 mA cm−2. With adopting BTPV-4F as the rear cell acceptor material, the resulting tandem devices reached a high power conversion efficiency of over 16.4% with good photostability. The results indicate that BTPV-4F is an efficient infrared-absorbing narrow bandgap acceptor and has great potential to be applied into tandem organic solar cells.

scholarly journals Digital printing of a novel electrode for stable flexible organic solar cells with a power conversion efficiency of 8.5%

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
S. Wageh ◽  
Mahfoudh Raïssi ◽  
Thomas Berthelot ◽  
Matthieu Laurent ◽  
Didier Rousseau ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Organic Solar Cells ◽  
Power Conversion ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Solution Processed ◽  
Transparent Conducting

AbstractPoly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) mixed with single-wall nanotubes (SWNTs) (10:1) and doped with (0.1 M) perchloric acid (HClO4) in a solution-processed film, working as an excellent thin transparent conducting film (TCF) in organic solar cells, was investigated. This new electrode structure can be an outstanding substitute for conventional indium tin oxide (ITO) for applications in flexible solar cells due to the potential of attaining high transparency with enhanced conductivity, good flexibility, and good durability via a low-cost process over a large area. In addition, solution-processed vanadium oxide (VOx) doped with a small amount of PEDOT-PSS(PH1000) can be applied as a hole transport layer (HTL) for achieving high efficiency and stability. From these viewpoints, we investigate the benefit of using printed SWNTs-PEDOT-PSS doped with HClO4 as a transparent conducting electrode in a flexible organic solar cell. Additionally, we applied a VOx-PEDOT-PSS thin film as a hole transporting layer and a blend of PTB7 (polythieno[3,4-b] thiophene/benzodithiophene): PC71BM (phenyl-C71-butyric acid methyl ester) as an active layer in devices. Zinc oxide (ZnO) nanoparticles were applied as an electron transport layer and Ag was used as the top electrode. The proposed solar cell structure showed an enhancement in short-circuit current, power conversion efficiency, and stability relative to a conventional cell based on ITO. This result suggests a great carrier injection throughout the interfacial layer, high conductivity and transparency, as well as firm adherence for the new electrode.

scholarly journals Two-dimensional or passivation treatment: the effect of Hexylammonium post deposition treatment on 3D halide perovskite-based solar cells

2021 ◽  
Author(s):  
Stav Rahmany ◽  
Lioz Etgar
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Two Dimensional ◽  
Theoretical Limit ◽  
Halide Perovskite ◽  
Passivation Treatment ◽  
Post Deposition

Much effort has been made to push the power conversion efficiency of perovskite solar cells (PSCs) towards the theoretical limit. Recent studies have shown that post deposition treatment of barrier...

Organic cathode interfacial materials for non-fullerene organic solar cells

2021 ◽  
Author(s):  
Minkyu Kyeong ◽  
Jinho Lee ◽  
Matyas Daboczi ◽  
Katherine Stewart ◽  
Huifeng Yao ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
High Power ◽  
Organic Solar Cells ◽  
Power Conversion ◽  
High Power Conversion Efficiency ◽  
Amine Groups

Functionalized polyethyleneimines that are compatible with non-fullerene acceptors have been developed by protecting the reactive amine groups, leading to non-fullerene solar cells with high power conversion efficiency and enhanced thermal stability.

Spontaneous Enhancement of Power Conversion Efficiency in SnO2-Based Dye-Sensitized Solar Cells

2021 ◽  
Vol 11 (3) ◽  
pp. 674-678
Author(s):  
Shibing Zou ◽  
Lingting Song ◽  
Junhong Duan ◽  
Le Huang ◽  
Weiqing Liu ◽  
...  
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Dye Sensitized Solar Cells ◽  
Dye Sensitized ◽  
Sensitized Solar Cells
Sign in / Sign up

Export Citation Format

Share Document