Damage Modelling at Material Interfaces

2007 ◽  
pp. 213-270 ◽  
Author(s):  
Marcin Białas ◽  
Zenon Mróz
Keyword(s):  
Material Interfaces ◽  
Damage Modelling

Biomimetic Design of 3D Printed Tissue-engineered bone Constructs

2020 ◽  
Vol 16 ◽  
Author(s):  
Wei Liu ◽  
Shifeng Liu ◽  
Yunzhe Li ◽  
Peng Zhou ◽  
Qian ma
Keyword(s):  
Tissue Engineering ◽  
3D Printing ◽  
Advanced Materials ◽  
Bionic Design ◽  
Material Interfaces ◽  
Precise Control ◽  
Cell Printing ◽  
Biomimetic Scaffolds ◽  
3D Printed

Abstract:: Surgery to repair damaged tissue, which is caused by disease or trauma, is being carried out all the time, and a desirable treatment is compelling need to regenerate damaged tissues to further improve the quality of human health. Therefore, more and more research focus on exploring the most suitable bionic design to enrich available treatment methods. 3D-printing, as an advanced materials processing approach, holds promising potential to create prototypes with complex constructs that could reproduce primitive tissues and organs as much as possible or provide appropriate cell-material interfaces. In a sense, 3D printing promises to bridge between tissue engineering and bionic design, which can provide an unprecedented personalized recapitulation with biomimetic function under the precise control of the composition and spatial distribution of cells and biomaterials. This article describes recent progress in 3D bionic design and the potential application prospect of 3D printing regenerative medicine including 3D printing biomimetic scaffolds and 3D cell printing in tissue engineering.

scholarly journals Acoustic cavities in 2D heterostructures

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Maxim K. Zalalutdinov ◽  
Jeremy T. Robinson ◽  
Jose J. Fonseca ◽  
Samuel W. LaGasse ◽  
Tribhuwan Pandey ◽  
...  
Keyword(s):  
Sound Propagation ◽  
Phonon Scattering ◽  
Frequency Comb ◽  
Material Interfaces ◽  
Low Frequencies ◽  
Strongly Coupled ◽  
Propagation Analysis ◽  
Acoustic Cavities ◽  
Ab Initio Approach ◽  
Spatiotemporal Response

AbstractTwo-dimensional (2D) materials offer unique opportunities in engineering the ultrafast spatiotemporal response of composite nanomechanical structures. In this work, we report on high frequency, high quality factor (Q) 2D acoustic cavities operating in the 50–600 GHz frequency (f) range with f × Q up to 1 × 1014. Monolayer steps and material interfaces expand cavity functionality, as demonstrated by building adjacent cavities that are isolated or strongly-coupled, as well as a frequency comb generator in MoS2/h-BN systems. Energy dissipation measurements in 2D cavities are compared with attenuation derived from phonon-phonon scattering rates calculated using a fully microscopic ab initio approach. Phonon lifetime calculations extended to low frequencies (<1 THz) and combined with sound propagation analysis in ultrathin plates provide a framework for designing acoustic cavities that approach their fundamental performance limit. These results provide a pathway for developing platforms employing phonon-based signal processing and for exploring the quantum nature of phonons.

scholarly journals Characterization of Mechanical Heterogeneity in Dissimilar Metal Welded Joints

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4145
Author(s):  
He Xue ◽  
Zheng Wang ◽  
Shuai Wang ◽  
Jinxuan He ◽  
Hongliang Yang
Keyword(s):  
Mechanical Properties ◽  
Finite Element ◽  
Welded Joints ◽  
Structural Integrity ◽  
Material Interfaces ◽  
Mechanical Heterogeneity ◽  
Finite Element Software ◽  
Dissimilar Metal ◽  
Stress Changes

Dissimilar metal welded joints (DMWJs) possess significant localized mechanical heterogeneity. Using finite element software ABAQUS with the User-defined Material (UMAT) subroutine, this study proposed a constitutive equation that may be used to express the heterogeneous mechanical properties of the heat-affected and fusion zones at the interfaces in DMWJs. By eliminating sudden stress changes at the material interfaces, the proposed approach provides a more realistic and accurate characterization of the mechanical heterogeneity in the local regions of DMWJs than existing methods. As such, the proposed approach enables the structural integrity of DMWJs to be analyzed in greater detail.

The dog as a preclinical model to evaluate interface morphology and micro-motion in cemented total knee replacement

2012 ◽  
Vol 25 (01) ◽  
pp. 01-10 ◽  
Author(s):  
M. A. Miller ◽  
M. Khorasani ◽  
K. L. Townsend ◽  
M. J. Allen ◽  
K. A. Mann
Keyword(s):  
Total Knee Replacement ◽  
Knee Replacement ◽  
Subchondral Bone ◽  
Tibial Component ◽  
Preclinical Model ◽  
Interface Morphology ◽  
Material Interfaces ◽  
Post Surgery ◽  
Total Knee ◽  
Micro Motion

SummaryObjectives: This study investigated cemented fixation of the tibial component from a canine total knee replacement preclinical model. The objective was to determine the local morphology at the material interfaces (implant, cement, bone) and the local relative micro-motion due to functional loading following in vivo service.Methods: Five skeletally mature research dogs underwent unilateral total knee replacement using a cemented implant system with a polyethylene (PE) monobloc tibial component. Use of the implanted limb was assessed by pressure-sensitive walkway analysis. At 60 weeks post-surgery, the animals were euthanatized and the tibia sectioned en bloc in the sagittal plane to create medial and lateral specimens. High resolution imaging was used to quantify the morphology under the tray and along the keel. Specimens were loaded to 50% body weight and micro-motions at the PE-cement and cement-bone interfaces were quantified.Results: There was significantly (p = 0.002) more cement-bone apposition and interdigitation along the central keel compared to the regions under the tray. Cavitary defects were associated with the perimeters of the implant (60 ± 25%). Interdigitation fraction was negatively correlated with cavitary defect fraction, cement crack fraction, and total micro-motion.Clinical significance: Achieving good inter-digitation of cement into subchondral bone beneath the tibial tray is associated with improved interface morphology and reduced micro-motion; features that could result in a reduced incidence of aseptic loosening. Multiple drill holes distributed over the cut tibial surface and adequate pressurization of the cement into the subchondral bone should improve fixation and reduce interface micro-motion and cavitary defects.

A Molecular Dynamics Study of Thermal Conductivity in Nanocomposites via the Phonon Wave Packet Method

2009 ◽  
Author(s):  
Zhiting Tian ◽  
Sang Kim ◽  
Ying Sun ◽  
Bruce White
Keyword(s):  
Thermal Conductivity ◽  
Molecular Dynamics ◽  
Wave Packet ◽  
Molecular Dynamics Simulations ◽  
Phonon Scattering ◽  
Flow Direction ◽  
Normal Incidence ◽  
Material Interfaces ◽  
Non Equilibrium Molecular Dynamics ◽  
Dynamics Simulations

The phonon wave packet technique is used in conjunction with the molecular dynamics simulations to directly observe phonon scattering at material interfaces. The phonon transmission coefficient of nanocomposites is examined as a function of the defect size, thin film thickness, orientation of interface to the heat flow direction. To generalize the results based on phonons in a narrow frequency range and at normal incidence, the effective thermal conductivity of the same nanocomposite structure is calculated using non-equilibrium molecular dynamics simulations for model nanocomposites formed by two mass-mismatched Ar-like solids and heterogeneous Si-SiCO2 systems. The results are compared with the modified effective medium formulation for nanocomposites.

Sign in / Sign up

Export Citation Format

Share Document