Ultra-High Rayleigh Number Convection Research Cryostat

2000 ◽  
pp. 1197-1204
Author(s):  
G. E. McIntosh ◽  
J. H. Cloyd ◽  
K. Pyziak ◽  
J. J. Niemela ◽  
L. Skrbek ◽  
...  
Keyword(s):  
Rayleigh Number

scholarly journals Horizontal convection in a rectangular enclosure driven by a linear temperature profile

2021 ◽  
Author(s):  
Tianyong Yang ◽  
Bofu Wang ◽  
Jianzhao Wu ◽  
Zhiming Lu ◽  
Quan Zhou
Keyword(s):  
Rayleigh Number ◽  
Temperature Profile ◽  
Scaling Law ◽  
Thermal Plume ◽  
Steady Regime ◽  
Linear Temperature ◽  
Square Enclosure ◽  
Horizontal Convection ◽  
Kinetic Boundary Layer ◽  
The Mean

AbstractThe horizontal convection in a square enclosure driven by a linear temperature profile along the bottom boundary is investigated numerically by using a finite difference method. The Prandtl number is fixed at 4.38, and the Rayleigh number Ra ranges from 107 to 1011. The convective flow is steady at a relatively low Rayleigh number, and no thermal plume is observed, whereas it transits to be unsteady when the Rayleigh number increases beyond the critical value. The scaling law for the Nusselt number Nu changes from Rossby’s scaling Nu ∼ Ra1/5 in a steady regime to Nu ∼ Ra1/4 in an unsteady regime, which agrees well with the theoretically predicted results. Accordingly, the Reynolds number Re scaling varies from Re ∼ Ra3/11 to Re ∼ Ra2/5. The investigation on the mean flows shows that the thermal and kinetic boundary layer thickness and the mean temperature in the bulk zone decrease with the increasing Ra. The intensity of fluctuating velocity increases with the increasing Ra.

Heat transfer characteristics of nanofluids from a sinusoidal corrugated cylinder placed in a square cavity

2021 ◽  
pp. 095440622110272
Author(s):  
Salaika Parvin ◽  
Nepal Chandra Roy ◽  
Litan Kumar Saha ◽  
Sadia Siddiqa
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Average Nusselt Number ◽  
Numerical Study ◽  
Heat Transfer Characteristics ◽  
Number Range ◽  
Transfer Characteristics ◽  
Wide Range

A numerical study is performed to investigate nanofluids' flow field and heat transfer characteristics between the domain bounded by a square and a wavy cylinder. The left and right walls of the cavity are at constant low temperature while its other adjacent walls are insulated. The convective phenomena take place due to the higher temperature of the inner corrugated surface. Super elliptic functions are used to transform the governing equations of the classical rectangular enclosure into a system of equations valid for concentric cylinders. The resulting equations are solved iteratively with the implicit finite difference method. Parametric results are presented in terms of streamlines, isotherms, local and average Nusselt numbers for a wide range of scaled parameters such as nanoparticles concentration, Rayleigh number, and aspect ratio. Several correlations have been deduced at the inner and outer surface of the cylinders for the average Nusselt number, which gives a good agreement when compared against the numerical results. The strength of the streamlines increases significantly due to an increase in the aspect ratio of the inner cylinder and the Rayleigh number. As the concentration of nanoparticles increases, the average Nusselt number at the internal and external cylinders becomes stronger. In addition, the average Nusselt number for the entire Rayleigh number range gets enhanced when plotted against the volume fraction of the nanofluid.

scholarly journals Free Convection Heat Transfer from Horizontal Cylinders

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 559
Author(s):  
Janusz T. Cieśliński ◽  
Slawomir Smolen ◽  
Dorota Sawicka
Keyword(s):  
Heat Transfer ◽  
Rayleigh Number ◽  
Free Convection ◽  
Convection Heat Transfer ◽  
Horizontal Tube ◽  
Correlation Equations ◽  
Convection Heat ◽  
Number Range ◽  
Heated Cylinder ◽  
Free Convection Heat

The results of experimental investigation of free convection heat transfer in a rectangular container are presented. The ability of the commonly accepted correlation equations to reproduce present experimental data was tested as well. It was assumed that the examined geometry fulfils the requirement of no-interaction between heated cylinder and bounded surfaces. In order to check this assumption recently published correlation equations that jointly describe the dependence of the average Nusselt number on Rayleigh number and confinement ratios were examined. As a heat source served electrically heated horizontal tube immersed in an ambient fluid. Experiments were performed with pure ethylene glycol (EG), distilled water (W), and a mixture of EG and water at 50%/50% by volume. A set of empirical correlation equations for the prediction of Nu numbers for Rayleigh number range 3.6 × 104 < Ra < 9.2 × 105 or 3.6 × 105 < Raq < 14.8 × 106 and Pr number range 4.5 ≤ Pr ≤ 160 has been developed. The proposed correlation equations are based on two characteristic lengths, i.e., cylinder diameter and boundary layer length.

A Simple Model of Heat Distribution at Various Rayleigh Number in Silicon Elastomer

2021 ◽  
Vol 395 (1) ◽  
pp. 2000230
Author(s):  
Sneha Sama ◽  
Ignazio Blanco ◽  
G. Crescente ◽  
Michelina. Catauro
Keyword(s):  
Simple Model ◽  
Rayleigh Number ◽  
Heat Distribution

scholarly journals Dimensionless Correlations for Natural Convection Heat Transfer from a Pair of Vertical Staggered Plates Suspended in Free Air

2021 ◽  
Vol 11 (14) ◽  
pp. 6511
Author(s):  
Alessandro Quintino ◽  
Marta Cianfrini ◽  
Ivano Petracci ◽  
Vincenzo Andrea Spena ◽  
Massimo Corcione
Keyword(s):  
Heat Transfer ◽  
Rayleigh Number ◽  
Convection Heat Transfer ◽  
Separation Distance ◽  
Vertical Alignment ◽  
Maximum Heat ◽  
Plate Length ◽  
Optimal Separation ◽  
Maximum Heat Transfer ◽  
Free Air

Buoyancy-induced convection from a pair of staggered heated vertical plates suspended in free air is studied numerically with the main scope to investigate the basic heat and momentum transfer features and to determine in what measure any independent variable affects the thermal performance of each plate and both plates. A computational code based on the SIMPLE-C algorithm for pressure-velocity coupling is used to solve the system of the governing conservation equations of mass, momentum and energy. Numerical simulations are carried out for different values of the Rayleigh number based on the plate length, as well as of the horizontal separation distance between the plates and their vertical alignment, which are both normalized by the plate length. It is observed that an optimal separation distance between the plates for the maximum heat transfer rate related to the Rayleigh number and the vertical alignment of the plates does exist. Based on the results obtained, suitable dimensionless heat transfer correlations are developed for each plate and for the entire system.

scholarly journals Conduction and convection heat transfer characteristics of water-based au nanofluids in a square cavity with differentially heated side walls subjected to constant temperatures

2014 ◽  
Vol 18 (suppl.1) ◽  
pp. 189-200 ◽  
Author(s):  
Primoz Ternik ◽  
Rebeka Rudolf
Keyword(s):  
Heat Transfer ◽  
Rayleigh Number ◽  
Base Fluid ◽  
Volume Fraction ◽  
Heat Transfer Characteristics ◽  
Square Cavity ◽  
Onset Of Convection ◽  
Transfer Characteristics ◽  
Wide Range ◽  
Water Based

The present work deals with the natural convection in a square cavity filled with the water-based Au nanofluid. The cavity is heated on the vertical and cooled from the adjacent wall, while the other two horizontal walls are adiabatic. The governing differential equations have been solved by the standard finite volume method and the hydrodynamic and thermal fields were coupled together using the Boussinesq approximation. The main objective of this study is to investigate the influence of the nanoparticles? volume fraction on the heat transfer characteristics of Au nanofluids at the given base fluid?s (i.e. water) Rayleigh number. Accurate results are presented over a wide range of the base fluid Rayleigh number and the volume fraction of Au nanoparticles. It is shown that adding nanoparticles in a base fluid delays the onset of convection. Contrary to what is argued by many authors, we show by numerical simulations that the use of nanofluids can reduce the heat transfer rate instead of increasing it.

Interpretation of shadowgraph patterns in Rayleigh-Bénard convection

1988 ◽  
Vol 190 ◽  
pp. 451-469 ◽  
Author(s):  
D. R. Jenkins
Keyword(s):  
Rayleigh Number ◽  
Linear Theory ◽  
Vertical Component ◽  
Fluid Flows ◽  
Bénard Convection ◽  
Benard Convection ◽  
Higher Order Terms ◽  
The Relationship ◽  
Rayleigh Benard Convection ◽  
Rayleigh Benard

The relationship between observations of cellular Rayleigh-Bénard convection using shadowgraphs and theoretical expressions for convection planforms is considered. We determine the shadowgraphs that ought to be observed if the convection is as given by theoretical expressions for roll, square or hexagonal planforms and compare them with actual experiments. Expressions for the planforms derived from linear theory, valid for low supercritical Rayleigh number, produce unambiguous shadowgraphs consisting of cells bounded by bright lines, which correspond to surfaces through which no fluid flows and on which the vertical component of velocity is directed downwards. Dark spots at the centre of cells, indicating regions of hot, rising fluid, are not accounted for by linear theory, but can be produced by adding higher-order terms, predominantly due to the temperature dependence of a material property of the fluid, such as its viscosity.

Sign in / Sign up

Export Citation Format

Share Document