Applying Vector Software Concepts to the Quantitation of Polymer Systems

1987 ◽  
pp. 281-298
Author(s):  
J. A. Miller ◽  
R. J. Obremski
Keyword(s):  
Polymer Systems

Structure-property relationships of PE/PP sandwiched films

1987 ◽  
Vol 45 ◽  
pp. 454-455
Author(s):  
J. Petermann ◽  
G. Broza ◽  
U. Rieck ◽  
A. Jaballah ◽  
A. Kawaguchi
Keyword(s):  
Mechanical Tests ◽  
Polymer Materials ◽  
Ionic Crystals ◽  
Structure Property ◽  
Polymer Systems ◽  
Structure Property Relationships ◽  
Oriented Films ◽  
Materials Used ◽  
Polymer Laminates ◽  
Heated Glass

Oriented overgrowth of polymer materials onto ionic crystals is well known and recently it was demonstrated that this epitaxial crystallisation can also occur in polymer/polymer systems, under certain conditions. The morphologies and the resulting physical properties of such systems will be presented, especially the influence of epitaxial interfaces on the adhesion of polymer laminates and the mechanical properties of epitaxially crystallized sandwiched layers.Materials used were polyethylene, PE, Lupolen 6021 DX (HDPE) and 1810 D (LDPE) from BASF AG; polypropylene, PP, (PPN) provided by Höchst AG and polybutene-1, PB-1, Vestolen BT from Chemische Werke Hüls. Thin oriented films were prepared according to the method of Petermann and Gohil, by winding up two different polymer films from two separately heated glass-plates simultaneously with the help of a motor driven cylinder. One double layer was used for TEM investigations, while about 1000 sandwiched layers were taken for mechanical tests.

Approaches for TEM imaging of cavitation in toughened nylon

1989 ◽  
Vol 47 ◽  
pp. 352-353
Author(s):  
Barbara A. Wood
Keyword(s):  
Morphological Characteristics ◽  
Structure Property ◽  
Polymer Systems ◽  
Selective Staining ◽  
Structure Property Relationships ◽  
Rubber Toughened ◽  
Shear Yield ◽  
Controversial Topic ◽  
Selection Of ◽  
Diamond Knife

A controversial topic in the study of structure-property relationships of toughened polymer systems is the internal cavitation of toughener particles resulting from damage on impact or tensile deformation.Detailed observations of the influence of morphological characteristics such as particle size distribution on deformation mechanisms such as shear yield and cavitation could provide valuable guidance for selection of processing conditions, but TEM observation of damaged zones presents some experimental difficulties.Previously published TEM images of impact fractured toughened nylon show holes but contrast between matrix and toughener is lacking; other systems investigated have clearly shown cavitated impact modifier particles. In rubber toughened nylon, the physical characteristics of cavitated material differ from undamaged material to the extent that sectioning of heavily damaged regions by cryoultramicrotomy with a diamond knife results in sections of greater than optimum thickness (Figure 1). The detailed morphology is obscured despite selective staining of the rubber phase using the ruthenium trichloride route to ruthenium tetroxide.

Interactions between citrate and montmorillonite-Al hydroxide polymer systems

1997 ◽  
Vol 48 (3) ◽  
pp. 463-472 ◽  
Author(s):  
R.P.T. JANSSEN ◽  
M.G.M. BRUGGENWERT ◽  
W.H. VAN RIEMSDIJK
Keyword(s):  
Polymer Systems

Nonlinear Thermodynamic Relaxation in Living Polymer Systems

1991 ◽  
Vol 1 (5) ◽  
pp. 489-492 ◽  
Author(s):  
C. M. Marques ◽  
M. E. Cates
Keyword(s):  
Polymer Systems

INFLUENCE OF SILICA FILLER ON COHESION-ADHESION PROPERTIES OF NANOSTRUCTURIZED POLYMER-POLYMER SYSTEMS

2020 ◽  
Vol 42 (1) ◽  
pp. 11-18
Author(s):  
T.L. MALYSHEVA ◽  
◽  
A.L. TOLSTOV ◽  
E.V. GRES ◽  
◽  
...  
Keyword(s):  
Adhesion Properties ◽  
Polymer Systems ◽  
Silica Filler

Nanocomposite Polyurethane Foams Via POSS Blends

2002 ◽  
Vol 733 ◽  
Author(s):  
Brock McCabe ◽  
Steven Nutt ◽  
Brent Viers ◽  
Tim Haddad
Keyword(s):  
High Temperature ◽  
Sample Preparation ◽  
Room Temperature ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Polyurethane Foams ◽  
Development Projects ◽  
Polymer Systems ◽  
Polyurethane Resin ◽  
Military Development

AbstractPolyhedral Oligomeric Silsequioxane molecules have been incorporated into a commercial polyurethane formulation to produce nanocomposite polyurethane foam. This tiny POSS silica molecule has been used successfully to enhance the performance of polymer systems using co-polymerization and blend strategies. In our investigation, we chose a high-temperature MDI Polyurethane resin foam currently used in military development projects. For the nanofiller, or “blend”, Cp7T7(OH)3 POSS was chosen. Structural characterization was accomplished by TEM and SEM to determine POSS dispersion and cell morphology, respectively. Thermal behavior was investigated by TGA. Two methods of TEM sample preparation were employed, Focused Ion Beam and Ultramicrotomy (room temperature).

DEVELOPMENT OF COMPUTATIONAL EXPERIMENTAL METHODS TO OPTIMIZE THE MECHANICAL CHARACTERISTICS OF HIGH-ENERGY FILLED POLYMER SYSTEMS

2012 ◽  
Vol 3 (2) ◽  
pp. 135-148 ◽  
Author(s):  
I. I. Anisimov ◽  
E. A. Chashchikhin ◽  
V. I Desyatykh ◽  
S. P. Ogorodnikov ◽  
B. A. Lyukshin ◽  
...  
Keyword(s):  
Mechanical Characteristics ◽  
Experimental Methods ◽  
High Energy ◽  
Filled Polymer ◽  
Polymer Systems
Sign in / Sign up

Export Citation Format

Share Document