Cross Section Transmission Electron Microscopy (XTEM) on Inert Gas Implanted Metals

1991 ◽  
pp. 143-152 ◽  
Author(s):  
E. Gerritsen ◽  
J. Th. M. De Hosson
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Cross Section ◽  
Inert Gas ◽  
Transmission Electron

Microstructure of laser-irradiated, conducting Kapton polyimide

1995 ◽  
Vol 53 ◽  
pp. 502-503
Author(s):  
D. L. Callahan ◽  
Z. Ball ◽  
H. M. Phillips ◽  
R. Sauerbrey
Keyword(s):  
Electron Microscopy ◽  
Phase Transition ◽  
Transmission Electron Microscopy ◽  
Cross Section ◽  
Film Surface ◽  
Cross Sectional ◽  
General Utility ◽  
Transmission Electron ◽  
Considerable Debate ◽  
Potential Applications

Ultraviolet laser-irradiation can be used to induce an insulator-to-conductor phase transition on the surface of Kapton polyimide. Such structures have potential applications as resistors or conductors for VLSI applications as well as general utility electrodes. Although the percolative nature of the phase transformation has been well-established, there has been little definitive work on the mechanism or extent of transformation. In particular, there has been considerable debate about whether or not the transition is primarily photothermal in nature, as we propose, or photochemical. In this study, cross-sectional optical microscopy and transmission electron microscopy are utilized to characterize the nature of microstructural changes associated with the laser-induced pyrolysis of polyimide.Laser-modified polyimide samples initially 12 μm thick were prepared in cross-section by standard ultramicrotomy. Resulting contraction in parallel to the film surface has led to distortions in apparent magnification. The scale bars shown are calibrated for the direction normal to the film surface only.

The use of an energy-filtering electron microscope to reduce chromatic aberration in images of thick biological specimens

1986 ◽  
Vol 44 ◽  
pp. 88-91
Author(s):  
L. D. Peachey ◽  
J. P. Heath ◽  
G. Lamprecht
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Electron Beam ◽  
Cross Section ◽  
Electron Scattering ◽  
Chromatic Aberration ◽  
Image Resolution ◽  
Incident Electron Energy ◽  
Energy Filtering ◽  
Transmission Electron

Biological specimens of cells and tissues generally are considerably thicker than ideal for high resolution transmission electron microscopy. Actual image resolution achieved is limited by chromatic aberration in the image forming electron lenses combined with significant energy loss in the electron beam due to inelastic scattering in the specimen. Increased accelerating voltages (HVEM, IVEM) have been used to reduce the adverse effects of chromatic aberration by decreasing the electron scattering cross-section of the elements in the specimen and by increasing the incident electron energy.

TEM Characterization of As-Deposited and Annealed Ni/Al Multilayer Thin Film

2010 ◽  
Vol 16 (6) ◽  
pp. 662-669 ◽  
Author(s):  
S. Simões ◽  
F. Viana ◽  
A.S. Ramos ◽  
M.T. Vieira ◽  
M.F. Vieira
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Transmission Electron Microscopy ◽  
Cross Section ◽  
Ion Beam ◽  
Microstructural Characterization ◽  
Multilayer Thin Films ◽  
Tem Analysis ◽  
Plan View ◽  
Transmission Electron

AbstractReactive multilayer thin films that undergo highly exothermic reactions are attractive choices for applications in ignition, propulsion, and joining systems. Ni/Al reactive multilayer thin films were deposited by dc magnetron sputtering with a period of 14 nm. The microstructure of the as-deposited and heat-treated Ni/Al multilayers was studied by transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) in plan view and in cross section. The cross-section samples for TEM and STEM were prepared by focused ion beam lift-out technique. TEM analysis indicates that the as-deposited samples were composed of Ni and Al. High-resolution TEM images reveal the presence of NiAl in small localized regions. Microstructural characterization shows that heat treating at 450 and 700°C transforms the Ni/Al multilayered structure into equiaxed NiAl fine grains.

Defects Analysis of Diamond Films in Cross Section Using Cathodoluminescence and High-Resolution Transmission Electron Microscopy

2001 ◽  
Vol 78-79 ◽  
pp. 197-204
Author(s):  
Daisuke Takeuchi ◽  
Hideyuki Watanabe ◽  
Sadanori Yamanaka ◽  
Hidetaka Sawada ◽  
Hideki Ichinose ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Cross Section ◽  
Diamond Films ◽  
Transmission Electron ◽  
Defects Analysis

Lattice Defects in Epitaxial Ba2Bi4Ti5O18 Thin Films Grown by Pulsed Laser Deposition Onto LaNiO3 Bottom Electrodes

2000 ◽  
Vol 623 ◽  
Author(s):  
N.D. Zakharov ◽  
A.R. James ◽  
A. Pignolet ◽  
S. Senz ◽  
D. Hesse
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Cross Section ◽  
Pulsed Laser ◽  
Laser Deposition ◽  
Stacking Sequence ◽  
Rectangular Shape ◽  
Transmission Electron ◽  
Single Well ◽  
New Type

AbstractEpitaxial, ferroelectric Ba2Bi4Ti5O18 films grown on LaNiO3/CeO2/ZrO2:Y2O3 epitaxial layers on Si(100) are investigated by cross-section high-resolution transmission electron microscopy (HRTEM). The films are perfectly oriented and consist of well-developed grains of rectangular shape. The grain boundaries are strained and contain many defects, especially a new type of defect, which can be described as a staircase formed by repeated lattice shifts of Δ ∼ c/12 ∼ 4.2 Å in the [001] direction. This repeated shift results in seemingly bent ribbons of stacked Bi2O2 planes, involving, however, individual Bi2O2 planes which remain strongly parallel to the (001) plane. These defects contain an excess of bismuth. Other defects found in the grain interior include mistakes in the stacking sequence originating from the presence of single, well-oriented, non-stoichionietric layers intergrown with the stoichiometric Ba2Bi4Ti5O18 film matrix.

CoSi2 Precipitate Coarsening During Formation of Buried Epitaxial Cosi2 Layers By Ion Beam Synthesis

1990 ◽  
Vol 201 ◽  
Author(s):  
R. Jebasinski ◽  
S. Mantl ◽  
K. Radermacher ◽  
P. Fichtner ◽  
W. Jăger ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Activation Energy ◽  
Transmission Electron Microscopy ◽  
Cross Section ◽  
Microstructural Evolution ◽  
Annealing Temperature ◽  
Ion Beam ◽  
Precipitate Coarsening ◽  
Annealing Temperatures ◽  
Transmission Electron

AbstractThe coarsening of CoSi2 precipitates and the microstructural evolution of (111) Si implanted with 200 keV Co+ ions at 350°C and fluences of 1×1016cm−2 and 6×1016cm−2 were investigated as a function of depth, annealing temperature and annealing time using Rutherford Backscattering Spectroscopy (RBS) and Transmission Electron Microscopy (TEM). After annealing cross-section TEM micrographs show a layered array of platelet-shaped precipitates with preferred facets on {111} planes. The fraction of Co-atoms, that were redistributed during the different annealing temperatures and times, has been used to determine an activation energy for the precipitate coarsening. By applying the Meechan-Brinkman and the change-of-slope methods, we obtained activation energies in the range of 3.2 – 3.6 eV.

Three Dimensional Dislocation Analysis of Threading Mixed Dislocation Using Multi Directional Scanning Transmission Electron Microscopy

2017 ◽  
Vol 897 ◽  
pp. 173-176 ◽  
Author(s):  
Takahiro Sato ◽  
Yuya Suzuki ◽  
Hiroyuki Ito ◽  
Toshiyuki Isshiki ◽  
Kuniyasu Nakamura
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Cross Section ◽  
Scanning Transmission Electron Microscopy ◽  
Plan View ◽  
Burgers Vector ◽  
Scanning Transmission Electron ◽  
Mixed Dislocation ◽  
Transmission Electron ◽  
Scanning Transmission

The recently developed multi directional scanning transmission electron microscopy (MD-STEM) technique has been applied to exactly determine the Burgers vector (b) and dislocation vector (u) of a threading mixed dislocation in a silicon carbide (SiC) as-epitaxial wafer. This technique utilizes repeated focused ion beam (FIB) milling and STEM observation of the same dislocation from three orthogonal directions (cross-section, plan-view, cross-section). Cross section STEM observation in the [1-100] viewing direction showed that the burgers vector have a and c components. Subsequent plan view STEM observation in the [000-1] direction indicated that the b=[u -2uuw] (u≠0 and w≠0). Final cross section STEM observation in the [11-20] direction confirmed that the dislocation was an extended dislocation, with the Burgers vector experimentally found to be b = [1-210]a/3 + [0001]c which decomposes into two partial dislocations of bp1 = [0-110]a/3 + [0001]c/2 and bp2 = [1-100]a/3 + [0001]c/2. The dislocation vector u is [-12-10]a/3 + [0001]c. This technique is an effective method to analyze the dislocation characteristics of power electronics devices.

Hydrogen induced plastic deformation of stainless steel

1998 ◽  
Vol 513 ◽  
Author(s):  
V. J. Gadgil ◽  
E. G. Keima ◽  
H. J. M. Geijselaers
Keyword(s):  
Electron Microscopy ◽  
Finite Element Method ◽  
Transmission Electron Microscopy ◽  
Computer Simulation ◽  
Plastic Deformation ◽  
Stainless Steel ◽  
Cross Section ◽  
Dislocation Substructure ◽  
Transmission Electron ◽  
Aqueous Environments

ABSTRACTHydrogen can influence the behaviour of materials significantly. The effects of hydrogen are specially pronounced in high fugacities of hydrogen which can occur at the surface of steels in contact with certain aqueous environments. In this investigation the effect of high fugacity hydrogen on the surface of stainless steel was investigated using electrochemical cathodic charging. Microhardness was measured on the cross section. Transmission electron microscopy was used to investigate the dislocation substructure just below the surface. Computer simulation using finite element method was carried out to estimate the extent and severity of the deformation. The significance of the results are discussed in relation to the loss of ductility due to hydrogen.

Nanotubes of the disulfides of groups 4 and 5 metals

2002 ◽  
Vol 74 (9) ◽  
pp. 1545-1552 ◽  
Author(s):  
Manashi Nath ◽  
C. N. R. Rao
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Elevated Temperatures ◽  
Layered Materials ◽  
Inert Gas ◽  
Transmission Electron ◽  
Important Addition ◽  
Inorganic Layered Materials

Nanotubes of HfS2, ZrS2, NbS2, and TaS2 have been obtained by the reduction of the corresponding metal trisulfides in a stream of H2 (mixed with an inert gas in some cases) at elevated temperatures. The nanotubes have been characterized by transmission electron microscopy (TEM) and other techniques. These disulfide nanotubes make an important addition to the growing family of nanotubes of inorganic layered materials.

Sign in / Sign up

Export Citation Format

Share Document