Sound Signal Sensitivity of Subjective Auditory Features

Author(s):  
Jin Liang ◽  
Xin Wang ◽  
Tuoyang Zhou ◽  
Zhen Liao ◽  
Lei Liu ◽  
...  
Author(s):  
Weihai Sun ◽  
Lemei Han

Machine fault detection has great practical significance. Compared with the detection method that requires external sensors, the detection of machine fault by sound signal does not need to destroy its structure. The current popular audio-based fault detection often needs a lot of learning data and complex learning process, and needs the support of known fault database. The fault detection method based on audio proposed in this paper only needs to ensure that the machine works normally in the first second. Through the correlation coefficient calculation, energy analysis, EMD and other methods to carry out time-frequency analysis of the subsequent collected sound signals, we can detect whether the machine has fault.


2021 ◽  
Vol 179 ◽  
pp. 260-267
Author(s):  
Norezmi Jamal ◽  
Nabilah Ibrahim ◽  
MNAH Sha’abani ◽  
Farhanahani Mahmud ◽  
N. Fuad

Author(s):  
Madhwendra Nath ◽  
Subodh Srivastava ◽  
Niharika Kulshrestha ◽  
Dilbag Singh

Adults born after 1970s are more prone to cardiovascular diseases. Death rate percentage is quite high due to heart related diseases. Therefore, there is necessity to enquire the problem or detection of heart diseases earlier for their proper treatment. As, Valvular heart disease, that is, stenosis and regurgitation of heart valve, are also a major cause of heart failure; which can be diagnosed at early-stage by detection and analysis of heart sound signal, that is, HS signal. In this proposed work, an attempt has been made to detect and localize the major heart sounds, that is, S1 and S2. The work in this article consists of three parts. Firstly, self-acquisition of Phonocardiogram (PCG) and Electrocardiogram (ECG) signal through a self-assembled, data-acquisition set-up. The Phonocardiogram (PCG) signal is acquired from all the four auscultation areas, that is, Aortic, Pulmonic, Tricuspid and Mitral on human chest, using electronic stethoscope. Secondly, the major heart sounds, that is, S1 and S2are detected using 3rd Order Normalized Average Shannon energy Envelope (3rd Order NASE) Algorithm. Further, an auto-thresholding has been used to localize time gates of S1 and S2 and that of R-peaks of simultaneously recorded ECG signal. In third part; the successful detection rate of S1 and S2, from self-acquired PCG signals is computed and compared. A total of 280 samples from same subjects as well as from different subjects (of age group 15–30 years) have been taken in which 70 samples are taken from each auscultation area of human chest. Moreover, simultaneous recording of ECG has also been performed. It was analyzed and observed that detection and localization of S1 and S2 found 74% successful for the self-acquired heart sound signal, if the heart sound data is recorded from pulmonic position of Human chest. The success rate could be much higher, if standard data base of heart sound signal would be used for the same analysis method. The, remaining three auscultations areas, that is, Aortic, Tricuspid, and Mitral have smaller success rate of detection of S1 and S2 from self-acquired PCG signals. So, this work justifies that the Pulmonic position of heart is most suitable auscultation area for acquiring PCG signal for detection and localization of S1 and S2 much accurately and for analysis purpose.


Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3446
Author(s):  
Muhammad Usman Liaquat ◽  
Hafiz Suliman Munawar ◽  
Amna Rahman ◽  
Zakria Qadir ◽  
Abbas Z. Kouzani ◽  
...  

Sound localization is a field of signal processing that deals with identifying the origin of a detected sound signal. This involves determining the direction and distance of the source of the sound. Some useful applications of this phenomenon exists in speech enhancement, communication, radars and in the medical field as well. The experimental arrangement requires the use of microphone arrays which record the sound signal. Some methods involve using ad-hoc arrays of microphones because of their demonstrated advantages over other arrays. In this research project, the existing sound localization methods have been explored to analyze the advantages and disadvantages of each method. A novel sound localization routine has been formulated which uses both the direction of arrival (DOA) of the sound signal along with the location estimation in three-dimensional space to precisely locate a sound source. The experimental arrangement consists of four microphones and a single sound source. Previously, sound source has been localized using six or more microphones. The precision of sound localization has been demonstrated to increase with the use of more microphones. In this research, however, we minimized the use of microphones to reduce the complexity of the algorithm and the computation time as well. The method results in novelty in the field of sound source localization by using less resources and providing results that are at par with the more complex methods requiring more microphones and additional tools to locate the sound source. The average accuracy of the system is found to be 96.77% with an error factor of 3.8%.


2019 ◽  
Vol 14 (1) ◽  
Author(s):  
Bingfang Zou ◽  
Chunyu Niu ◽  
Ming Ma ◽  
Lu Zhao ◽  
Yongqiang Wang

AbstractThe fabrication of a uniform array film through assembly of colloidal building blocks is of practical interest for the integrated individual and collective functions. Here, a magnetic assembly route was put forward to organize monodisperse noble metal microspheres into a uniform array film for surface-enhanced Raman scattering (SERS) application, which demonstrated the integrated signal sensitivity of single noble metal microspheres and reproducibility of their assembled uniform array film. For this purpose, monodisperse multifunctional Fe3O4@SiO2@TiO2@Ag (FOSTA) colloidal microspheres as building blocks were successfully synthesized through a homemade ultrasonic-assisted reaction system. When used in SERS test, these multifunctional microspheres could firstly bind the analyte (R6G) from solution and then assembled into a uniform film under an external magnetic field, which exhibited high SERS detection sensitivity with good reproducibility. In addition, due to the TiO2 interlayer in FOSTA colloidal microspheres, the building blocks could be recycled and self cleaned through photocatalytic degradation of the adsorbed analyte for recycling SERS application.


2019 ◽  
Vol 40 (5) ◽  
pp. 1053-1065 ◽  
Author(s):  
Mathieu Bourguignon ◽  
Martijn Baart ◽  
Efthymia C. Kapnoula ◽  
Nicola Molinaro

Sign in / Sign up

Export Citation Format

Share Document