Geological, Geochemical, and Microbial Factors Affecting Coalbed Methane

Author(s):  
Curtis Evans ◽  
Karen Budwill ◽  
Michael J. Whiticar
2020 ◽  
Vol 38 (1-2) ◽  
pp. 3-23 ◽  
Author(s):  
Yang Zhao ◽  
Xiaodong Zhang ◽  
Shuo Zhang ◽  
Jiaosheng Yang ◽  
Xianzhong Li ◽  
...  

Adsorption and desorption of coalbed methane are generally at a dynamic equilibrium state under the undisturbed coal reservoir. However, as the reservoir pressure drops to a certain value during the extraction of coalbed methane, the equilibrium state is destroyed and thus more coalbed methane desorbs and escapes from coal to wellbore. Here the corresponding bottom-hole fluid pressure is called initial gas production pressure (IGPP) in the development practice of coalbed methane wells. This paper, which has taken Changzhi-Anze block in the central-southern part of Qinshui basin as the study object, addresses the distribution characteristic and control factors of IGPP of coalbed methane wells and then explores the key factors affecting IGPP using grey correlation analysis theory. The results indicate that IGPP varies from 1.09 MPa to 6.57 MPa, showing a distribution law with high in the middle and low in the west and east of the study area, which presents a similar distribution characteristic with burial depth, thickness, coal rank, gas content, original reservoir pressure, and in-situ stress. Further, through grey correlation analysis, it concludes that the correlation degrees of control factors affecting IGPP of coalbed methane wells in the descending order are decline rate of working fluid level, water yield before gas production, reservoir pressure, coal thickness, coal rank, minimum horizontal principal stress, burial depth, and gas content. Among these factors, engineering factors, including decline rate of working fluid level and water yield before gas production, present a key controlling effect, because they can determine the smooth migration pathway directly during initial water production. And another key factor, original reservoir pressure also builds strong and positive correlation with IGPP under the interaction of other geology and reservoir factors, revealing the capability of gas desorption and the transmission of pressure drops.


Geofluids ◽  
2019 ◽  
Vol 2019 ◽  
pp. 1-17 ◽  
Author(s):  
Kaizhong Zhang ◽  
Qingquan Liu ◽  
Kan Jin ◽  
Liang Wang ◽  
Yuanping Cheng ◽  
...  

In order to determine the controlling factors affecting coalbed gas migration in the Xutuan coal mine, Huaibei Coalfield, China, overlying caprocks with Quaternary and Neogene formation (loose bed), Paleogene formation (Redbed), and coal-bearing strata were investigated via petrography, lithology, and physical properties according to laboratory tests, theoretical analysis, and on-site exploration. Results indicate that the basic properties of coal were not significantly changed whereas the effect of coalbed gas escape was promoted in the presence of Redbed and loose bed. The pore structure analysis shows that Redbed has well-developed pore connectivity than coal-bearing strata (main components are sandstone, siltstone, and mudstone). Also, the diffusion coefficient and permeability of Redbed and loose bed are proved to be a little different than those of sandstone but are much higher than those of mudstone and siltstone. Based on the aforementioned findings, investigation on the sealing mechanism of overlying caprocks on CBM migration was further discussed, interpreting that the thickness, permeation, and diffusion features are crucial factors for sealing capacity of the overlying caprock. Thus, with the simplification on the thickness of overlying strata, a conceptional analysis was carried out to theoretically estimate the sealability of caprocks from surface drilling holes; it appears, though, that the master factor on coalbed methane accumulation is coal-bearing strata instead of Redbed and loose bed with a poor sealability. In this case, the reliability of the evaluation method could be indirectly validated from the on-site gas content data of the actual coal seam to fundamentally reflect the effect of Redbed and loose bed on gas-escaping, and the impact of coal-bearing strata on gas accumulation in the coal seam.


2014 ◽  
Vol 962-965 ◽  
pp. 168-171 ◽  
Author(s):  
Run Chen

CO2injection into coal seams can not only enhance coalbed methane recovery (ECBM), but also reduce greenhouse gas emission into atmosphere. This paper describes some factors affecting CBM primary production, ECBM recovery and CO2sequestration in coal seams; and calculates CBM recovery quantity with primary production, the ECBM recovery potential quantity and CO2sequestration capacity in coal seams of West Henan Province. The results show that CBM primary and ECBM recovery potential quantity are estimated to be over 2147.278 and 1656.217 Gm3. The prediction also indicates that CO2sequestration potential quantity is about 3233.79 Gm3.


Fuel ◽  
2019 ◽  
Vol 244 ◽  
pp. 240-246 ◽  
Author(s):  
Hongguang Guo ◽  
Yatong Cheng ◽  
Zaixing Huang ◽  
Michael A. Urynowicz ◽  
Weiguo Liang ◽  
...  

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4516
Author(s):  
Weitao Liu ◽  
Yueyun Qin ◽  
Xiangxi Meng ◽  
Lifu Pang ◽  
Mengke Han ◽  
...  

The internal fractures in coal and rock mass are important factors affecting the safety of underground engineering such as coalbed methane exploitation, so the comprehensive properties of materials used to seal the fractures are particularly critical. In this paper, firstly, the indexes of the main factors affecting the plugging material (viscosity, bleeding rate, setting time, and strength) were analyzed. Then, the sensitivity of the materials used to seal the fractures was studied and discussed using a principal component analysis and response surface analysis (RSM-PCA). The primary conclusions are as follows: (1) Bleed rate and setting time were the first principal components affecting the comprehensive properties of the plugging materials, and compressive strength was the second principal component. (2) The regression equation was established to characterize the comprehensive properties of the integrated plugging materials, and the optimal mix ratio was 34% of cement content, 11% of sand content, and 0.53 of the W/C. (3) The microscopic results showed that the silicate minerals in the consolidated body grow in a bridging manner and formed a mixed gel with cement hydration product to fill the pores and microcracks and improved the interface transition zone.


Fuel ◽  
2019 ◽  
Vol 247 ◽  
pp. 395
Author(s):  
Hongguang Guo ◽  
Yatong Cheng ◽  
Zaixing Huang ◽  
Michael A. Urynowicz ◽  
Weiguo Liang ◽  
...  

2014 ◽  
Vol 962-965 ◽  
pp. 21-28
Author(s):  
Bei Liu ◽  
Wei Hua Ao ◽  
Wen Hui Huang ◽  
Qi Lu Xu ◽  
Juan Teng

Coalbed methane (CBM) productivity is influenced by various factors. Based on field production data and test data of southern Qinshui Basin, factors including geological factors, engineering factors and drainage factors that affect CBM productivity are analyzed. Analytic hierarchy process (AHP) is introduced to calculate the contribution of each parameter to CBM productivity. A three-level model for evaluating CBM productivity based on AHP is established. The results show that average daily gas production of single well in southern Qinshui Basin increases with gas content, coal seam thickness, permeability, porosity, gas saturation, critical desorption pressure. Filling minerals in pores and fractures of coal can decrease gas content, porosity and permeability of coal reservoir. When burial depth is deeper than 500m or reservoir pressure is greater than 2MPa and burial depth is shallower than 1000m or reservoir pressure is less than 10MPa, CBM productivity is relatively high. According to the calculation, the weight of geological factors, engineering factors and drainage factors are 50%, 25% and 25%, respectively. Reservoir physical properties, geological conditions, fracturing technology and drainage process have the most impact, the weight of which are 33.33%, 16.67%, 11.79%, and 15.00%, respectively.


Sign in / Sign up

Export Citation Format

Share Document