Contribution to Thermal Properties of Multi-Component Porous Ceramic Materials Used in High-Temperature Processes in the Foundry Industry

2011 ◽  
pp. 187-218 ◽  
Author(s):  
Z. Ignaszak ◽  
P. Popielarski
Keyword(s):  
Thermal Properties ◽  
High Temperature ◽  
Porous Ceramic ◽  
Ceramic Materials ◽  
Foundry Industry ◽  
High Temperature Processes ◽  
Materials Used ◽  
Porous Ceramic Materials

Research of the Sensitivities of Fracture Strength of Porous Ceramic Materials to the Relevant Parameters

2011 ◽  
Vol 217-218 ◽  
pp. 191-195
Author(s):  
Wei Guo Li ◽  
Ru Zhuan Wang ◽  
Ding Yu Li ◽  
Dai Ning Fang
Keyword(s):  
High Temperature ◽  
Pore Size ◽  
Young’S Modulus ◽  
Fracture Strength ◽  
Shape Factor ◽  
Young's Modulus ◽  
Porous Ceramic ◽  
Ceramic Materials ◽  
Pore Shape ◽  
Porous Ceramic Materials

In this paper, based on the study of effects of various physical mechanisms on the fracture strength of porous ceramic materials, a thermo-damage strength theoretical model applied to each stage of temperature is established. Using the model, the sensitivities of fracture strength to relevant parameters and their variation with temperature are studied in detail. The results show that under low temperature the strength is sensitive to the changes of porosity, pore size and pore shape factor, while under high temperature the effects of porosity, pore size and pore shape factor on the strength compared to the temperature are negligible, yet the strength is very sensitive to the Young’s modulus, thus the Young’s modulus is the dominant of strength under high temperature. This study will provide a theoretical basis and guidance to the design and application of porous ceramic materials.

scholarly journals Centrifugal Infiltration of Porous Ceramic Preforms by the Liquid Al Alloy – Theoretical Background and Experimental Verification

2016 ◽  
Vol 61 (1) ◽  
pp. 411-418 ◽  
Author(s):  
A.J. Dolata
Keyword(s):  
Heat Exchange ◽  
Liquid Metal ◽  
Experimental Verification ◽  
Porous Ceramic ◽  
Specific Area ◽  
Ceramic Materials ◽  
Theoretical Background ◽  
Al Alloy ◽  
Ceramic Preform ◽  
Porous Ceramic Materials

The goal of this work is the description of phenomena occurring during centrifugal infiltration of porous ceramic materials by liquid Al alloy. In this method, the pressure required to infiltration of liquid metal into pores of ceramic is generated by centrifugal force. From the beginning it was assumed that the porous ceramic material will create reinforcement layer in specific area of the casting. The forces that influence on the liquid metal during mould centrifugation and heat exchange between ceramic preform and metal alloy within the area of the front of infiltration were considered in the analysis. The paper presents also selected experiment results.

scholarly journals Smart ceramic materials for homogeneous combustion in internal combustion engines: A review

2009 ◽  
Vol 13 (3) ◽  
pp. 153-163 ◽  
Author(s):  
Kannan Chidambaram ◽  
Tamilporai Packirisamy
Keyword(s):  
Combustion Chamber ◽  
Internal Combustion Engines ◽  
Porous Ceramic ◽  
Ceramic Materials ◽  
Combustion Engines ◽  
Emission Level ◽  
Engine Cylinder ◽  
Homogeneous Combustion ◽  
Zero Emission ◽  
Porous Ceramic Materials

The advantages of using ceramics in advanced heat engines include increased fuel efficiency due to higher engine operating temperatures, more compact designs with lower capacity cooling system. Future internal combustion engines will be characterized by near zero emission level along with low specific fuel consumption. Homogenous combustion which realized inside the engine cylinder has the potential of providing near zero emission level with better fuel economy. However, the accomplishment of homogeneous combustion depends on the air flow structure inside the combustion chamber, fuel injection conditions and turbulence as well as ignition conditions. Various methods and procedures are being adopted to establish the homogeneous combustion inside the engine cylinder. In recent days, porous ceramic materials are being introduced inside the combustion chamber to achieve the homogeneous combustion. This paper investigates the desirable structures, types, and properties of such porous ceramic materials and their positive influence on the combustion process.

Preparation of Porous Ceramic Materials for Backscatter Electron Imaging: Some observations on MgO Refractory Brick

2004 ◽  
Vol 10 (S02) ◽  
pp. 742-743
Author(s):  
James H Steele
Keyword(s):  
Porous Ceramic ◽  
Ceramic Materials ◽  
Backscatter Electron ◽  
Refractory Brick ◽  
Backscatter Electron Imaging ◽  
Electron Imaging ◽  
Porous Ceramic Materials

Extended abstract of a paper presented at Microscopy and Microanalysis 2004 in Savannah, Georgia, USA, August 1–5, 2004.

Preparation and Characterization of Quartz Porous Ceramic Materials Using the Yangtze River Sand

2013 ◽  
Vol 804 ◽  
pp. 52-56
Author(s):  
Yan Ping Feng ◽  
Zhi Wen Qiu ◽  
Xiao Bin Ma ◽  
Lei Zhao ◽  
Xin Chao Chen ◽  
...  
Keyword(s):  
Yangtze River ◽  
Raw Materials ◽  
Porous Ceramic ◽  
Ceramic Materials ◽  
Porous Ceramics ◽  
Low Grade ◽  
The Yangtze River ◽  
Insulation Property ◽  
River Sand ◽  
Porous Ceramic Materials

In order to lay raw materials foundation for increasing the performance of insulating brick with the low grade quartz sand along the Yangtze River, the quartz porous ceramic materials was researched in this paper. The results show the porosity of the porous quartz ceramics decreased with an increase in the sintering temperature. The pore is like the bowl shape, and the pore is closed pore, which is help to improve the heat insulation property of quartz porous ceramics. The CaSiO4 is produced in the ceramics after sintering processing. The shape is better, and the microstructure is circular and symmetrical pore, which is help to improve the mechanical property of quartz porous ceramics.

CERAMICS BASED ON ORGANOSILICON POLYMERS-PRECURSORS: MICROSTRUCTURE AND PROPERTIES (review). Part 1

2021 ◽  
pp. 21-33
Author(s):  
A.M. Shestakov ◽  
Keyword(s):  
Ceramic Composite ◽  
Porous Ceramic ◽  
Ceramic Materials ◽  
Structure And Properties ◽  
Ceramic Foams ◽  
Controlled Porosity ◽  
Composition Structure ◽  
Silicon Based ◽  
Porous Ceramic Materials ◽  
Organosilicon Polymers

The paper considers the process of pyrolysis of polymers-precursors, and also shows the influence of various parameters of technological processes for obtaining ceramics on its composition, structure, and properties. The main types of binary, ternary and multicomponent silicon-based ceramics, methods of its preparation, features of structure and properties are considered, and promising directions of application of ceramics are determined. The possibility of obtaining porous ceramic materials (ceramic foams) with controlled porosity and ceramic composite materials with a given composition is noted.

Sign in / Sign up

Export Citation Format

Share Document