Management of Information Models in the Energy Sector

2013 ◽  
pp. 79-96
Author(s):  
José M. González ◽  
Jörn Trefke
Keyword(s):  
Energy Sector ◽  
Information Models

Life Cycle of Construction Objects at Information Simulation of Buildings and Structures

2019 ◽  
pp. 65-72 ◽  
Keyword(s):  
Life Cycle ◽  
Construction Projects ◽  
Life Cycle Management ◽  
Information Modeling ◽  
Sources Of Information ◽  
Logical Scheme ◽  
Modeling Technology ◽  
Information Models ◽  
Building Information ◽  
The Russian Federation

The variants of the division of the life cycle of a construction object at the stages adopted in the territory of the Russian Federation, as well as in other countries are considered. Particular attention is paid to the exemplary work plan – "RIBA plan of work", used in England. A feature of this document is its applicability in the information modeling of construction projects (Building information Modeling – BIM). The article presents a structural and logical scheme of the life cycle of a building object and a list of works that are performed using information modeling technology at various stages of the life cycle of the building. The place of information models in the process of determining the service life of the building is shown. On the basis of the considered sources of information, promising directions for the development of the life cycle management system of the construction object (Life Cycle Management) and the development of the regulatory framework in order to improve the use of information modeling in construction are given.

Energy Law Principles and COVID-19

2020 ◽  
Vol 1 (2) ◽  
pp. 245-247
Author(s):  
Vicente Lopez-Ibor Mayor ◽  
Raphael J. Heffron
Keyword(s):  
Energy Sector ◽  
Economic Recovery ◽  
Low Carbon ◽  
Left Behind ◽  
Core Energy ◽  
Low Carbon Energy ◽  
Energy Law

It is advanced here that a principle-based approach is needed to develop the energy sector during and after COVID-19. The economic recovery that is needed needs to revolve around ensuring that no one is left behind, and it should be an inclusive transition to a secure and stable low-carbon energy future. There are seven core energy law principles that if applied to the energy sector could enable this to be achieved.

THE FORECASTINGS IN ENERGY SECTOR. ASPECTS OF METHODOLOGY AND THE INITIAL DATA

2018 ◽  
Vol 28 (104) ◽  
pp. 16-32
Author(s):  
E. V. Bykova, ◽  
◽  
V. P. Berzan, ◽  
V. M. Postolaty, ◽  
I. V. Vasilievа
Keyword(s):  
Initial Data ◽  
Energy Sector

FDI Opportunities in Indian Renewable Energy Sector

2012 ◽  
Vol 3 (4) ◽  
pp. 38-39
Author(s):  
R.Narayanan R.Narayanan ◽  
◽  
Dr. R. Hamsalakshmi Dr. R. Hamsalakshmi
Keyword(s):  
Renewable Energy ◽  
Energy Sector

PROSPECTS OF OBTAINING ALTERNATIVE FUEL FROM VARIOUS BIOMASS AND WASTE SPECIES IN AZERBAIJAN

2019 ◽  
pp. 25-41
Author(s):  
O. M. Salamov ◽  
F. F. Aliyev
Keyword(s):  
Power Plants ◽  
Energy Intensity ◽  
Oil And Gas ◽  
Renewable Energy Sources ◽  
Calorific Value ◽  
High Energy ◽  
Energy Sector ◽  
Energy Sources ◽  
Mineral Fertilizers ◽  
Gaseous Fuels

The paper discusses the possibility of obtaining liquid and gaseous fuels from different types of biomass (BM) and combustible solid waste (CSW) of various origins. The available world reserves of traditional types of fuel are analyzed and a number of environmental shortcomings that created during their use are indicated. The tables present the data on the conditional calorific value (CCV) of the main traditional and alternative types of solid, liquid and gaseous fuels which compared with CCV of various types of BM and CSW. Possible methods for utilization of BM and CSW are analyzed, as well as the methods for converting them into alternative types of fuel, especially into combustible gases.Reliable information is given on the available oil and gas reserves in Azerbaijan. As a result of the research, it was revealed that the currently available oil reserves of Azerbaijan can completely dry out after 33.5 years, and gas reserves–after 117 years, without taking into account the growth rates of the exported part of these fuels to European countries. In order to fix this situation, first of all it is necessary to use as much as possible alternative and renewable energy sources, especially wind power plants (WPP) and solar photovoltaic energy sources (SFES) in the energy sector of the republic. Azerbaijan has large reserves of solar and wind energy. In addition, all regions of the country have large reserves of BM, and in the big cities, especially in industrial ones, there are CSW from which through pyrolysis and gasification is possible to obtain a high-quality combustible gas mixture, comprising: H2 + CO + CH4, with the least amount of harmful waste. The remains of the reaction of thermochemical decomposition of BM and CSW to combustible gases can also be used as mineral fertilizers in agriculture. The available and projected resources of Azerbaijan for the BM and the CSW are given, as well as their assumed energy intensity in the energy sector of the republic.Given the high energy intensity of the pyrolysis and gasification of the BM and CSW, at the present time for carrying out these reactions, the high-temperature solar installations with limited power are used as energy sources, and further preference is given to the use of WPP and SFES on industrial scale.

Urban energetics applications and Geomatic technologies in a Smart City perspective

2015 ◽  
Vol 6 (1) ◽  
pp. 19-29 ◽  
Author(s):  
G. Bitelli ◽  
P. Conte ◽  
T. Csoknyai ◽  
E. Mandanici
Keyword(s):  
Smart City ◽  
Laser Scanning ◽  
Near Infrared ◽  
Three Dimensional ◽  
Energy Sector ◽  
Primary Objective ◽  
Airborne Lidar ◽  
City Management ◽  
Urban Context ◽  
Research Areas

The management of an urban context in a Smart City perspective requires the development of innovative projects, with new applications in multidisciplinary research areas. They can be related to many aspects of city life and urban management: fuel consumption monitoring, energy efficiency issues, environment, social organization, traffic, urban transformations, etc. Geomatics, the modern discipline of gathering, storing, processing, and delivering digital spatially referenced information, can play a fundamental role in many of these areas, providing new efficient and productive methods for a precise mapping of different phenomena by traditional cartographic representation or by new methods of data visualization and manipulation (e.g. three-dimensional modelling, data fusion, etc.). The technologies involved are based on airborne or satellite remote sensing (in visible, near infrared, thermal bands), laser scanning, digital photogrammetry, satellite positioning and, first of all, appropriate sensor integration (online or offline). The aim of this work is to present and analyse some new opportunities offered by Geomatics technologies for a Smart City management, with a specific interest towards the energy sector related to buildings. Reducing consumption and CO2 emissions is a primary objective to be pursued for a sustainable development and, in this direction, an accurate knowledge of energy consumptions and waste for heating of single houses, blocks or districts is needed. A synoptic information regarding a city or a portion of a city can be acquired through sensors on board of airplanes or satellite platforms, operating in the thermal band. A problem to be investigated at the scale A problem to be investigated at the scale of the whole urban context is the Urban Heat Island (UHI), a phenomenon known and studied in the last decades. UHI is related not only to sensible heat released by anthropic activities, but also to land use variations and evapotranspiration reduction. The availability of thermal satellite sensors is fundamental to carry out multi-temporal studies in order to evaluate the dynamic behaviour of the UHI for a city. Working with a greater detail, districts or single buildings can be analysed by specifically designed airborne surveys. The activity has been recently carried out in the EnergyCity project, developed in the framework of the Central Europe programme established by UE. As demonstrated by the project, such data can be successfully integrated in a GIS storing all relevant data about buildings and energy supply, in order to create a powerful geospatial database for a Decision Support System assisting to reduce energy losses and CO2 emissions. Today, aerial thermal mapping could be furthermore integrated by terrestrial 3D surveys realized with Mobile Mapping Systems through multisensor platforms comprising thermal camera/s, laser scanning, GPS, inertial systems, etc. In this way the product can be a true 3D thermal model with good geometric properties, enlarging the possibilities in respect to conventional qualitative 2D images with simple colour palettes. Finally, some applications in the energy sector could benefit from the availability of a true 3D City Model, where the buildings are carefully described through three-dimensional elements. The processing of airborne LiDAR datasets for automated and semi-automated extraction of 3D buildings can provide such new generation of 3D city models.

Sign in / Sign up

Export Citation Format

Share Document