Antimicrobial Coatings to Prevent Biofilm Formation on Medical Devices

Author(s):  
Phat L. Tran ◽  
Abdul N. Hamood ◽  
Ted W. Reid
Author(s):  
B.D. Tall ◽  
K.S. George ◽  
R. T. Gray ◽  
H.N. Williams

Studies of bacterial behavior in many environments have shown that most organisms attach to surfaces, forming communities of microcolonies called biofilms. In contaminated medical devices, biofilms may serve both as reservoirs and as inocula for the initiation of infections. Recently, there has been much concern about the potential of dental units to transmit infections. Because the mechanisms of biofilm formation are ill-defined, we investigated the behavior and formation of a biofilm associated with tubing leading to the water syringe of a dental unit over a period of 1 month.


Pathogens ◽  
2019 ◽  
Vol 8 (3) ◽  
pp. 93 ◽  
Author(s):  
Riau ◽  
Aung ◽  
Setiawan ◽  
Yang ◽  
Yam ◽  
...  

: Bacterial biofilm on medical devices is difficult to eradicate. Many have capitalized the anti-infective capability of silver ions (Ag+) by incorporating nano-silver (nAg) in a biodegradable coating, which is then laid on polymeric medical devices. However, such coating can be subjected to premature dissolution, particularly in harsh diseased tissue microenvironment, leading to rapid nAg clearance. It stands to reason that impregnating nAg directly onto the device, at the surface, is a more ideal solution. We tested this concept for a corneal prosthesis by immobilizing nAg and nano-hydroxyapatite (nHAp) on poly(methyl methacrylate), and tested its biocompatibility with human stromal cells and antimicrobial performance against biofilm-forming pathogens, Pseudomonas aeruginosa and Staphylococcus aureus. Three different dual-functionalized substrates—high Ag (referred to as 75:25 HAp:Ag); intermediate Ag (95:5 HAp:Ag); and low Ag (99:1 HAp:Ag) were studied. The 75:25 HAp:Ag was effective in inhibiting biofilm formation, but was cytotoxic. The 95:5 HAp:Ag showed the best selectivity among the three substrates; it prevented biofilm formation of both pathogens and had excellent biocompatibility. The coating was also effective in eliminating non-adherent bacteria in the culture media. However, a 28-day incubation in artificial tear fluid revealed a ~40% reduction in Ag+ release, compared to freshly-coated substrates. The reduction affected the inhibition of S. aureus growth, but not the P. aeruginosa. Our findings suggest that Ag+ released from surface-immobilized nAg diminishes over time and becomes less effective in suppressing biofilm formation of Gram-positive bacteria, such as S. aureus. This advocates the coating, more as a protection against perioperative and early postoperative infections, and less as a long-term preventive solution.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Ewelina Piktel ◽  
Łukasz Suprewicz ◽  
Joanna Depciuch ◽  
Sylwia Chmielewska ◽  
Karol Skłodowski ◽  
...  

AbstractMedical device-associated infections are a serious medical threat, particularly for patients with impaired mobility and/or advanced age. Despite a variety of antimicrobial coatings for medical devices being explored to date, only a limited number have been introduced for clinical use. Research into new bactericidal agents with the ability to eradicate pathogens, limit biofilm formation, and exhibit satisfactory biocompatibility, is therefore necessary and urgent. In this study, a series of varied-morphology gold nanoparticles in shapes of rods, peanuts, stars and spherical-like, porous ones with potent antibacterial activity were synthesized and thoroughly tested against spectrum of Candida albicans, Pseudomonas aeruginosa, Staphylococcus aureus clinical strains, as well as spectrum of uropathogenic Escherichia coli isolates. The optimization of gold nanoparticles synthesis allowed to develop nanomaterials, which are proved to be significantly more potent against tested microbes compared with the gold nanoformulations reported to date. Notably, their antimicrobial spectrum includes strains with different drug resistance mechanisms. Facile and cost-efficient synthesis of gold nanoparticles, remarkable bactericidal efficiency at nanogram doses, and low toxicity, underline their potential for development as a new coatings, as indicated by the example of urological catheters. The presented research fills a gap in microbial studies of non-spherical gold nanoparticles for the development of antimicrobial coatings targeting multidrug-resistant pathogens responsible for device-associated nosocomial infections.


2021 ◽  
Vol 232 (8) ◽  
Author(s):  
M. Vela-Cano ◽  
C. Garcia-Fontana ◽  
F. Osorio ◽  
A. González-Martinez ◽  
J. González-López

AbstractBiodeterioration is one of the most important processes in metal pipeline corrosion, and it can be due to physical, chemical, and biological factors. Coatings rich in silver have been used to inhibit this undesirable phenomenon. In this study, the antimicrobial properties of several silver-containing products used as a coating in pipelines were determined on a pilot scale in order to evaluate the ability of silver to inhibit biofilm formation. The results showed that the coating with silver zeolite at a concentration of 2000 mg L–1 inhibited the formation of a microbial biofilm and prevented the biodeterioration process. Therefore, from our study, it can be concluded that silver zeolite shows greater protection capacity than other silver preparations and presents advantages in relation to other silver coatings that are currently available


2019 ◽  
Vol 18 (24) ◽  
pp. 2068-2079 ◽  
Author(s):  
Michele Ciulla ◽  
Antonio Di Stefano ◽  
Lisa Marinelli ◽  
Ivana Cacciatore ◽  
Giuseppe Di Biase

S. aureus under the biofilm mode of growth is often related to several nosocomial infections, more frequently associated with indwelling medical devices (catheters, prostheses, portacaths or heart valves). As a biofilm, the biopolymer matrix provides an excellent growth medium, increasing the tolerance to antibiotics and host immune system. To date, the antimicrobial therapy alone is not effective. A novel strategy to prevent biofilm formation is based on the interference with the bacterial cell–cell communication, a process known as quorum sensing (QS) and mediated by the RNA-III-activating peptide (RAP) and its target protein TRAP (Target of RAP). The RNAIII inhibiting peptide (RIP) is able to inhibit S. aureus pathogenesis by disrupting QS mechanism competing with RAP, thus inhibiting the phosphorylation of TRAP. This alteration leads to a reduced adhesion and to the inhibition of RNAIII synthesis, with the subsequent suppression of toxins synthesis. The present paper will provide an overview on the activity and potential applications of RIP as biofilm inhibiting compound, useful in the management of S. aureus biofilm infections. Moreover, medicinal chemistry strategies have been examined to better understand which modifications and/or structure alterations were able to produce new derivatives of this QS inhibitor with an improved antibiofilm activity.


2020 ◽  
Vol 21 (4) ◽  
pp. 304-310
Author(s):  
I. Kara Terki ◽  
H. Hassaine ◽  
A. Kara Terki ◽  
B. Nadira ◽  
N. Kara Terki ◽  
...  

Background: Staphylococcus aureus is one of the species of bacteria most frequently isolated from medical devices. The ability to produce biofilm is an important step in the pathogenesis of these staphylococci infection, and biofilm formation is strongly dependent on environmental conditions as well as antibiotics and disinfectants used in the treatment and prevention of infections.Methodology: In this study, 28 S. aureus isolated from medical devices at the University Hospital Center of Sidi Bel Abbes in Northwestern Algeria were tested for biofilm formation by culture on Red Congo Agar (RCA). The tube method (TM) and tissue culture plate (TCP) techniques were also used to investigate the effect of penicillin, ethanol and betadine on pre-formed biofilm.Results: Nineteen S. aureus isolates produced biofilm on the RCA and 7 produced biofilms by the tube method, 2 of which were high producer. In addition, 9 S. aureus isolates produced biofilm on polystyrene micro-plates, and in the presence of penicillin and ethanol, this number increased to 19 and 11 biofilm producing S. aureus isolates respectively. On the other hand, no biofilm was formed in the presence of betadine.Conclusion: It is important to test for biofilm formation following an imposed external constraint such as disinfectants and antibiotics in order to develop new strategies to combat bacterial biofilms but also to better control their formation. Keywords : Staphylococcus aureus, biofilm, medical device, disinfectant, antibiotic French Title: Effets de certains désinfectants et antibiotiques sur la formation de biofilms par Staphylococcus aureus isolé à partir de dispositifs médicaux au Centre Hospitalier Universitaire de Sidi Bel Abbès, Algérie Contexte: Staphylococcus aureus est l'une des espèces de bactéries les plus fréquemment isolées des dispositifs médicaux. La capacité de produire du biofilm est une étape importante dans la pathogenèse de ces infections à staphylocoques, et la formation de biofilm dépend fortement des conditions environnementales ainsi que des antibiotiques et des désinfectants utilisés dans le traitement et la prévention des infections. Méthodologie: Dans cette étude, 28 S. aureus isolés à partir de dispositifs médicaux au Centre hospitalier universitaire de Sidi Bel Abbès dans le nord-ouest de l'Algérie ont été testés pour la formation de biofilm par culture sur gélose rouge du Congo (RCA). La méthode des tubes (TM) et les techniques de plaques de culture tissulaire (TCP) ont également été utilisées pour étudier l'effet de la pénicilline, de l'éthanol et de la bétadine sur le biofilm préformé. Résultats: Dix-neuf isolats de S. aureus ont produit un biofilm sur le RCA et 7 ont produit des biofilms par la méthode des tubes, dont 2 étaient très productifs. De plus, 9 isolats de S. aureus ont produit du biofilm sur des microplaques en polystyrène, et en présence de pénicilline et d'éthanol, ce nombre est passé à 19 et 11 isolats de S. aureus producteurs de biofilm respectivement. En revanche, aucun biofilm ne s'est formé en présence de bétadine. Conclusion: Il est important de tester la formation de biofilm suite à une contrainte externe imposée comme les désinfectants et les antibiotiques afin de développer de nouvelles stratégies pour lutter contre les biofilms bactériens mais aussi pour mieux contrôler leur formation. Mots-clés: Staphylococcus aureus, biofilm, dispositif médical, désinfectant, antibiotique  


2021 ◽  
Vol 12 ◽  
Author(s):  
Radha P. Somarathne ◽  
Emily R. Chappell ◽  
Y. Randika Perera ◽  
Rahul Yadav ◽  
Joo Youn Park ◽  
...  

Biofilms, when formed on medical devices, can cause malfunctions and reduce the efficiency of these devices, thus complicating treatments and serving as a source of infection. The autolysin protein of Staphylococcus epidermidis contributes to its biofilm forming ability, especially on polystyrene surfaces. R2ab and amidase are autolysin protein domains thought to have high affinity to polystyrene surfaces, and they are involved in initial bacterial attachment in S. epidermidis biofilm formation. However, the structural details of R2ab and amidase binding to surfaces are poorly understood. In this study, we have investigated how R2ab and amidase influence biofilm formation on polystyrene surfaces. We have also studied how these proteins interact with polystyrene nanoparticles (PSNPs) using biophysical techniques. Pretreating polystyrene plates with R2ab and amidase domains inhibits biofilm growth relative to a control protein, indicating that these domains bind tightly to polystyrene surfaces and can block bacterial attachment. Correspondingly, we find that both domains interact strongly with anionic, carboxylate-functionalized as well as neutral, non-functionalized PSNPs, suggesting a similar binding interaction for nanoparticles and macroscopic surfaces. Both anionic and neutral PSNPs induce changes to the secondary structure of both R2ab and amidase as monitored by circular dichroism (CD) spectroscopy. These changes are very similar, though not identical, for both types of PSNPs, suggesting that carboxylate functionalization is only a small perturbation for R2ab and amidase binding. This structural change is also seen in limited proteolysis experiments, which exhibit substantial differences for both proteins when in the presence of carboxylate PSNPs. Overall, our results demonstrate that the R2ab and amidase domains strongly favor adsorption to polystyrene surfaces, and that surface adsorption destabilizes the secondary structure of these domains. Bacterial attachment to polystyrene surfaces during the initial phases of biofilm formation, therefore, may be mediated by aromatic residues, since these residues are known to drive adsorption to PSNPs. Together, these experiments can be used to develop new strategies for biofilm eradication, ensuring the proper long-lived functioning of medical devices.


2012 ◽  
Vol 1415 ◽  
Author(s):  
Qi Wang ◽  
Thomas J. Webster

ABSTRACTBiofilms are a common cause of persistent infections on medical devices as they are easy to form and hard to treat. Selenium and its compounds are considered to be a novel material for a wide range of applications including anticancer applications and antibacterial applications. The objective of this study was to coat selenium nanoparticles on the surface of polycarbonate medical devices and examine their effectiveness at preventing biofilm formation. The results of this in vitro study showed that the selenium coating significantly inhibited Staphylococcus aureus growth on the surface of polycarbonate after 24 hours. Thus, this study suggests that coating polymers with nanostructured selenium is a fast and effective way to reduce bacteria functions leading to medical device infections.


2016 ◽  
Vol 7 (3) ◽  
pp. 656-668 ◽  
Author(s):  
Zhi Xiang Voo ◽  
Majad Khan ◽  
Qingxing Xu ◽  
Karthikeyan Narayanan ◽  
Brandon W. J. Ng ◽  
...  

There is a balance between antibacterial and antifouling functions, and the polymer without cationic antibacterial components effectively prevents biofilm formation.


2015 ◽  
Vol 82 (1) ◽  
pp. 394-401 ◽  
Author(s):  
Jakub Kwiecinski ◽  
Manli Na ◽  
Anders Jarneborn ◽  
Gunnar Jacobsson ◽  
Marijke Peetermans ◽  
...  

ABSTRACTStaphylococcus aureusbiofilm infections of indwelling medical devices are a major medical challenge because of their high prevalence and antibiotic resistance. As fibrin plays an important role inS. aureusbiofilm formation, we hypothesize that coating of the implant surface with fibrinolytic agents can be used as a new method of antibiofilm prophylaxis. The effect of tissue plasminogen activator (tPA) coating onS. aureusbiofilm formation was tested within vitromicroplate biofilm assays and anin vivomouse model of biofilm infection. tPA coating efficiently inhibited biofilm formation by variousS. aureusstrains. The effect was dependent on plasminogen activation by tPA, leading to subsequent local fibrin cleavage. A tPA coating on implant surfaces prevented both early adhesion and later biomass accumulation. Furthermore, tPA coating increased the susceptibility of biofilm infections to antibiotics.In vivo, significantly fewer bacteria were detected on the surfaces of implants coated with tPA than on control implants from mice treated with cloxacillin. Fibrinolytic coatings (e.g., with tPA) reduceS. aureusbiofilm formation bothin vitroandin vivo, suggesting a novel way to prevent bacterial biofilm infections of indwelling medical devices.


Sign in / Sign up

Export Citation Format

Share Document