OCDs in Binary Proper Equireplicate Block Design Set-Up

Abstract The effect of chemicals (Reglone 200 SL and Elastiq 550 EC) on soil microorganisms and their enzymatic activity was estimated. The study was conducted in a field experiment which was set up in the split-block design and comprised three treatments. Soil samples were taken six times, twice in each year of study. The results showed that the application of chemicals generally had no negative effect on the number of soil microorganisms. The application of Reglone 200 SL caused an increase of proteolytic and ureolytic activity and affected the activity of dehydrogenases, acid and alkaline phosphatases in the soil. The soil subjected of Elastiq 550 EC was characterized by lower activity of dehydrogenases, protease, urease and alkaline phosphatase.

Download Full-text

Influence of a BactoFil microbiological preparation on the intensity of infection by Rhizoctonia solani and the effects on sugar beet yield and quality

Sugar Industry ◽

10.36961/si12584 ◽

2012 ◽

pp. 102-109

Author(s):

Suzana Kristek ◽

Andrija Kristek ◽

Dragana Kocevski ◽

Antonija K. Jankovi ◽

Dražen Juriši

Keyword(s):

Sugar Beet ◽

Rhizoctonia Solani ◽

Nitrogen Fertilizer ◽

Soil Analysis ◽

Block Design ◽

Sugar Content ◽

Pathogenic Fungi ◽

Fertilizer Application ◽

Beet Root ◽

Set Up

The experiment was set up on two types of the soil: Mollic Gleysols (FAO, 1998) and Eutric Cambisols where the presence of pathogenic fungi – sugar beet root decay agent – Rhizoctonia solani has been detected since 2005. In a two year study (2008, 2009), the experiment was set up by completely randomized block design in 4 repetitions and 16 different variants. Two beet varieties, Belinda, sensitive to pathogenic fungi R. solani, and Laetitia, tolerant to pathogenic fungi R. solani), were grown. The microbiological preparation BactoFil was applied in different amounts in autumn and spring. In addition, the nitrogen fertilizer application, based on the results of soil analysis, was varied. The following parameters were tested: amount of infected and decayed plants, root yield, sugar content, sugar in molasses and sugar yield. The best results were obtained by applying the microbiological preparation BactoFil, and by 30% reduced nitrogen fertilizer application. Preparation dosage and time of application depended on soil properties.

Download Full-text

Seed Yam Production Using High-Quality Minitubers Derived from Plants Established with Vine Cuttings

Agronomy ◽

10.3390/agronomy11050978 ◽

2021 ◽

Vol 11 (5) ◽

pp. 978

Author(s):

Beatrice Aighewi ◽

Norbert Maroya ◽

Lava Kumar ◽

Morufat Balogun ◽

Daniel Aihebhoria ◽

...

Keyword(s):

Block Design ◽

Research Station ◽

International Institute ◽

Tropical Agriculture ◽

Single Node ◽

Cropping Season ◽

Randomized Complete Block Design ◽

The World ◽

Cropping Seasons ◽

Set Up

Yam (Dioscorea spp.) is a valuable food security crop in West Africa, where 92% of the world production occurs. The availability of quality seed tubers for increased productivity is a major challenge. In this study, minitubers weighing 1, 3, and 5 g produced from virus-free single-node vine cuttings of two improved yam varieties (Asiedu and Kpamyo) growing in an aeroponics system were assessed for suitability in seed production at a population of 100,000 plants ha−1. A 3 × 2 factorial experiment with randomized complete block design and three replications was set up during the cropping seasons of 2017 to 2019 at the International Institute of Tropical Agriculture Research Station in Kubwa, Abuja, Nigeria. Results showed field establishments of 87%–97.8%. Yields differed with minituber size, variety, and cropping season; the highest was 31.2 t ha−1 in 2019 and the lowest, 10 t ha−1 in 2018 from 5 and 1 g Kpamyo minitubers, respectively. The estimated number of tubers produced per hectare by 1, 3, and 5 g minitubers was 101,296, 112,592, and 130,555, with mean weights per stand of 159.2, 187.3, and 249.4 g, respectively. We recommend using less than 6 g minitubers for seed yam production due to their high multiplication rates.

Download Full-text

Agronomic performances of Pak Choi grown with different soil cover

Horticultura Brasileira ◽

10.1590/s0102-053620150000200020 ◽

2015 ◽

Vol 33 (2) ◽

pp. 261-266 ◽

Cited By ~ 1

Author(s):

Márcia M Echer ◽

Graciela M Dalastra ◽

Tiago L Hachmann ◽

Elcio S Klosowski ◽

Vandeir F Guimarães

Keyword(s):

Soil Cover ◽

Block Design ◽

Dry Weight ◽

Bare Soil ◽

Production Traits ◽

Pak Choi ◽

Randomized Block Design ◽

Black Plastic ◽

Growing Conditions ◽

Set Up

An important aspect in the cultivation of vegetables is the quality of the product to be marketed, free from dirt and damage and the practice of mulching could be an option, but there is scarse information. The aim of this study was to evaluate the influence of mulching on the production traits of three cultivars of Pak Choi. The experiment was set up during March to May 2013 using a split plot randomized block design, with four replications. Soil cover treatments (white agrotextile, black agrotextile, black plastic, silver plastic, tifton straw and bare soil) were arranged in the plots, and three cultivars of Pak Choi (Green Pak Choi, White Pak Choi and Chingensai Natsu Shomi) in subplots. Height and diameter of shoots, number of leaves, fresh weight of the head and petiole, base diameter, dry weight of stem, petiole, and leaf were evaluated thirty-five days after transplantation. The total dry weight and leaf area were measured, and then we estimated the yield. There was a significant effect of soil cover and cultivar. In general, the cover with synthetic materials showed higher values on production of Pak Choi. The cultivar White Pak Choi was better adapted to the growing conditions, with an average yield of 57.78 t/ha.

Download Full-text

Bioefficacy of some biorational insecticides for the control of Aphis gossypii Glover, 1877, (Hemiptera: Aphididae) on greenhouse grown cucumber

Acta agriculturae Slovenica ◽

10.14720/aas.2016.107.2.14 ◽

2016 ◽

Vol 107 (2) ◽

pp. 419 ◽

Cited By ~ 1

Author(s):

Mohammad Saeed Emami

Keyword(s):

Broad Spectrum ◽

Block Design ◽

Aphis Gossypii ◽

Coconut Oil ◽

Randomized Complete Block Design ◽

Aphis Gossypii Glover ◽

Sodium Sulfosuccinate ◽

Set Up

Aphis gossypii Glover, 1877 is a serious pest of cucumber in greenhouse plantings. Biorational insecticides are an alternative of broad spectrum insecticides for aphid suppression in greenhouse. In this regards, the efficiency of some biorational insecticides including soap based on coconut oil, surfactant based on sodium sulfosuccinate and antifeeding based on potassium nicotinate were assayed on A. gossypii in the cucumber greenhouse. The trials were set up in a randomized complete block design with four replications. Samplings were carried out one day before spraying and 3, 7, 14 and 21 days after spraying. The data were submitted to ANOVA and the means comparison was performed using Duncan’s test. The results indicated that the highest mortality in insecticidal soap, surfactant and antifeeding treatments occurred after 3 days, with 78.47 %, 67.16 % and 60.48 % mortality, respectively. The results of the trials are discussed in terms of improving management of the populations of A. gossypii.

Download Full-text

Alternatives to sowing vegetable type soybeans

Brazilian Archives of Biology and Technology ◽

10.1590/s1516-89131998000400007 ◽

1998 ◽

Vol 41 (4) ◽

pp. 429-436 ◽

Cited By ~ 1

Author(s):

Edcarlos Mannfredini ◽

Deonisio Destro ◽

Martin Homechin ◽

Gustavo Sachsida ◽

Édison Miglioranza

Keyword(s):

Plant Height ◽

Block Design ◽

Germination Percentage ◽

Flowering Plant ◽

Food Type ◽

Individual Plant ◽

Crop Failure ◽

Randomized Complete Block Design ◽

Set Up ◽

Disposable Plastic

Today, soybean crops of the Tamba Kurodaisu cultivar are sown in beds prior to transplantation to the field. This planting system has caused crop failure due to damage to the root system. An experiment to test different sowing alternatives to obtain plantlets for cropping of food type big seeded soybean was set up with the following treatments: sowing in beds; sowing in 130 cm³ newspaper cups; sowing in test tubes of volumes of 30 cm³, 60 cm³ and 70 cm³; sowing in 70 cm³ disposable plastic cups; sowing on 90 cm³ styrofoam trays. A randomized complete block design was used, and the following traits were assessed: germination percentage; number of days to flowering; plant height at flowering; number of days to maturity; plant height at maturity; number of seeds per plant; individual plant yield; weight of a hundred seeds. Results should that three methods could be used to set up Tamba Kurodaisu cultivar crops: sowing in disposable plastic cups, sowing in beds with later transplant, or direct sowing in the field.

Download Full-text

Effect of nitrogen fertilization on camelina seed yield, yield components, and downy mildew infection

Canadian Journal of Plant Science ◽

10.1139/cjps-2014-0348 ◽

2016 ◽

Vol 96 (1) ◽

pp. 17-26 ◽

Cited By ~ 8

Author(s):

Yunfei* Jiang ◽

Claude D. Caldwell

Keyword(s):

Downy Mildew ◽

Seed Yield ◽

Yield Components ◽

Disease Incidence ◽

Block Design ◽

Interactive Effect ◽

Yield Potential ◽

Eastern Canada ◽

Set Up ◽

N Rates

Camelina [Camelina sativa (L.) Crantz] has potential in aquaculture, livestock feed production, and the biofuel industry. It is necessary to determine the appropriate production technology for the newly introduced crop under different environmental conditions. The objective of this 2-year study was to measure the response of five camelina genotypes in terms of seed yield, yield components, and disease incidence to applied nitrogen (N) at multiple sites in the Maritime provinces of eastern Canada. The factorial experiment was set up as a randomized complete block design. The two factors were six N rates (0, 25, 50, 100, 150, and 200 kg ha−1 N) and five genotypes of camelina (Calena, CDI002, CDI005, CDI007, and CDI008). The interactive effect of N rates and genotypes was considered. Results showed that camelina, which is usually considered a low-input crop, responded positively to increased applied N at rates up to 200 kg ha−1 N. Seed yield responded differently to applied N rates depending on genotype. Branch and pod development were decisive for seed yield. The advanced line CDI007 had the highest yield potential among the five genotypes. Downy mildew infection was positively correlated with applied N rates; however, seed yield was not significantly affected by downy mildew infection.

Download Full-text

Optimation of In vitro Lateral Shoots Multiplication of Papaya (Carica papaya L.) “Callina” with BAP and NAA

Journal of Tropical Crop Science ◽

10.29244/jtcs.4.3.102-107 ◽

2017 ◽

Vol 4 (3) ◽

pp. 102-107

Author(s):

Darda Efendi ◽

Mirza R Putra

Keyword(s):

Carica Papaya ◽

Clonal Propagation ◽

Block Design ◽

Shoot Multiplication ◽

Plant Materials ◽

Randomized Block Design ◽

Lateral Shoots ◽

Shoot Production ◽

Set Up

Papaya is a popular fruit and is grown commercially in many subtropical and tropical countries. Papayas are generally grown from seeds; therefore the offsprings are not true-to-type and could come in three sexes, female, male, and hermaphrodite. Clonal propagation is required to obtain to grow true-to-type hermaphrodite papayas. In this research, we developed an in vitro protocol for shoot multiplication from lateral shoots from in vitro germinated papaya seedlings. The in vitro propagated plant materials could potentially be used as a source of papaya micro cuttings, or as scion for papaya grafting. The experiment was set up as a factorial experiment with NAA at 0, 0.1 and 0.5 mg.L-1, and BAP at 0, 0.1, 0.5, and 1.0 mg.L-1 in a completely randomized block design. BAP interacted with NAA in affecting the shoot production per explant. The optimum BAP and NAA concentration to produce lateral shoots was 0.54 mg. L-1 and 0.1 mg.L-1, respectively. Media without NAA reduced the number of lateral shoots and number of leaf per explant at any BAP concentration.Keywords: hermaphrodite, seeds, true to type, clonal propagation, micro cuttings.

Download Full-text

Components of genetic variability and heritability of grain yield of silage maize

Genetika ◽

10.2298/gensr0402121s ◽

2004 ◽

Vol 36 (2) ◽

pp. 121-131 ◽

Cited By ~ 2

Author(s):

Mile Secanski ◽

Tomislav Zivanovic ◽

Goran Todorovic ◽

Gordana Surlan-Momirovic

Keyword(s):

Genetic Variability ◽

Grain Yield ◽

Genetic Variance ◽

Block Design ◽

Inbred Lines ◽

Narrow Sense Heritability ◽

Additive Variance ◽

Silage Maize ◽

V Genes ◽

Set Up

The aim of the present study was to evaluate the following parameters for the grain yield of silage maize: variability of inbred lines and their diallel hybrids, superior-parent heterosis and components of genetic variability and heritability on the basis of the diallel set. The two-year four-replicate trial was set up according to the randomized complete-block design at Zemun Polje. It was determined that a genotype, year and their interaction significantly affected variability of this trait. The highest. i.e. the lowest grain yield, on the average for both investigation years. was recorded in the silage maize inbred lines ZPLB402 and ZPLB405. respectively. The analysis of components of genetic variance for grain yield shows that the additive component (D) was lower than the dominant (H1 and H2) genetic variance, while a positive component F and the frequency of dominant (u) and recessive (v) genes for this observed trait point to prevalence of dominant genes over recessive ones. Furthermore. this is confirmed by the ratio of dominant to recessive genes in parental genotypes for grain yield (Kd/Kr> 1) that is greater than unity in both years of investigation. The estimated value of the average degree of dominance (H1/D)1/2 exceeds unity, pointing out to superdominance in inheritance of this trait in both years of investigation. Results of Vr/Vr regression analysis indicate superdominance in inheritance of grain yield. Moreover. a registered presence of non-allelic interaction points out to the need to study effects of epistasis, as it can have a greater significance in certain hybrids. A greater value of dominant than additive variance resulted in high values of broad-sense heritability for grain yield in both investigation years (98.71%, i.e. 97.19% in 1997, i.e. 1998, respectively). and low values of narrow-sense heritability (11.9% in 1997 and 12.2% in 1998).

Download Full-text

EFFECTS OF DIFFERENT TYPES OF CYTOPLASM ON THE KERNEL ROW NUMBER OF MAIZE INBRED LINES

AGROFOR ◽

10.7251/agreng1702155j ◽

2018 ◽

Vol 2 (2) ◽

Cited By ~ 1

Author(s):

Snežana JOVANOVIĆ ◽

Goran TODOROVIĆ ◽

Nikola GRČIĆ ◽

Ratibor ŠTRBANOVIĆ ◽

Rade STANISAVLJEVIĆ ◽

...

Keyword(s):

Environmental Factors ◽

Block Design ◽

Inbred Lines ◽

Mean Values ◽

Maize Inbred Lines ◽

Different Types ◽

Maize Inbreds ◽

Set Up ◽

Kernel Row Number

The aim of the present study was to determine effects of both, different types ofcytoplasm (cms-C, cms-S and fertile) and environmental factors on the kernel rownumber of 12 maize inbreds lines. The trial with inbred lines was set up in twolocations (Zemun Polje-Selection field and Zemun Polje-Školsko dobro) in 2013and 2014. Moreover, the three-replicate trials were set up according to therandomised complete block design within each type of cytoplasm. Each plot withinthe replicate consisted of four rows. Fertile versions of inbred lines were sown intwo border rows and they were pollinators for their sterile counterparts. Statisticbiometricdata processing was based on mean values per replicate and included theanalysis of variance. According to this analysis, significant differences in thekernel row number were established among inbred lines in dependence on the typeof cytoplasm, year and the location. The average kernel row number ranged from10.3 (L9) to 15.8 (L5 and L7). The variation of the kernel row number, related to thesource of cytoplasm, was very significant. Differences (Lsd0.01) in the kernel rownumber were not determined in inbred lines L5, L8, L10 and L12 in regard to the typeof cytoplasm: cms-C, cms-S and fertile. The average kernel row numbersignificantly (P1%) varied in regard to the year of investigation. A higher averagevalue (13.75) was established in 2014 than in 2013 (13.31). The kernel row numberper year very significantly varied (Lsd0.01) in all inbreds, but the differences werenot significant in the inbreds L2, L3, L8, L9 and L12. Gained results point out toeffects of different types of cytoplasm on the kernel row number.

Download Full-text