The Contribution of Bottom Ash Toward Filler Effect with Respect to Mortar

2020 ◽  
pp. 145-154 ◽  
Author(s):  
Lomesh S. Mahajan ◽  
S. R. Bhagat
Keyword(s):  
Bottom Ash

Characterization of lead-bearing phases in municipal waste combustor fly ash

1996 ◽  
Vol 54 ◽  
pp. 516-517
Author(s):  
L. L. Sutter ◽  
G. R. Dewey ◽  
J. F. Sandell
Keyword(s):  
Fly Ash ◽  
Bottom Ash ◽  
Municipal Waste ◽  
Primary Concern ◽  
Leaching Behavior ◽  
Waste Combustion ◽  
Lead And Cadmium ◽  
Lead Speciation ◽  
Accepted Practice

Municipal waste combustion typically involves both energy recovery as well as volume reduction of municipal solid waste prior to landfilling. However, due to environmental concerns, municipal waste combustion (MWC) has not been a widely accepted practice. A primary concern is the leaching behavior of MWC ash when it is stored in a landfill. The ash consists of a finely divided fly ash fraction (10% by volume) and a coarser bottom ash (90% by volume). Typically, MWC fly ash fails tests used to evaluate leaching behavior due to high amounts of soluble lead and cadmium species. The focus of this study was to identify specific lead bearing phases in MWC fly ash. Detailed information regarding lead speciation is necessary to completely understand the leaching behavior of MWC ash.

VALUE INCREASING OF REJECT COAL WITH BIOMASS ADDING AS BIO-COAL BRIQUETTE

2020 ◽  
Vol 3 (2) ◽  
pp. 123
Author(s):  
Dyah Marganingrum ◽  
Lenny Marilyn Estiaty
Keyword(s):  
Alternative Energy ◽  
Ignition Time ◽  
Bottom Ash ◽  
Calorific Value ◽  
Added Value ◽  
Physical Test ◽  
Chemical Test ◽  
Agglomeration Process ◽  
Strategic Solution ◽  
Index Value

Aim: This paper aims to explain the added value increasing method of reject coal which has not utilized by the company. Methodology and Results: The method to increase added value in this study used the agglomeration process of briquettes form that changing composition by adding biomass. The biomass functions to minimize bottom ash produced from burning briquettes so that the briquettes burn entirely. Stages processes in this study consist of characterization, briquetting, physical test, and chemical test. Based on the analysis, reject coal still has a high calorific value of 5,929 cal/gr. Shapes and sizes that were not following needs of coal market or consumer due to reject coal to be a waste. Briquettes have been successfully produced and meet specification requirements based on applicable regulations in Indonesia. Besides physical properties, the briquette meet density requirements which are greater than or equal to 1 gr/cm3 and shatter index value is less than 0.5%. The gas emission test shows below threshold, which is CO 0-30 ppm, H2S 0-3.6 ppm, and NOx is not detected. After evaluation, it showed that by adding 30% biomass, ignition time could be decreased and remaining unburned briquettes or bottom ash was reduced as much as 68.68%. Conclusion, significance and impact study: The bio-coal briquettes is a strategic solution to environmental problems and alternative energy sources that are environmentally friendly, because CO and H2S emissions are still below the threshold, even for NOx not detected. Making Bio-coal briquettes as a solution to the utilization of reject coal mining waste to be used as an alternative energy source has been successfully carried out.

Mechanism of Cement Paste with Different Particle Sizes of Bottom Ash as Partial Replacement in Portland Cement

2017 ◽  
Vol 68 (10) ◽  
pp. 2367-2372 ◽  
Author(s):  
Ng Hooi Jun ◽  
Mirabela Georgiana Minciuna ◽  
Mohd Mustafa Al Bakri Abdullah ◽  
Tan Soo Jin ◽  
Andrei Victor Sandu ◽  
...  
Keyword(s):  
Portland Cement ◽  
Construction Material ◽  
Bottom Ash ◽  
High Volume ◽  
Cement Composite ◽  
Pozzolanic Reaction ◽  
High Specific Surface Area ◽  
Partial Replacement ◽  
Natural Aggregates ◽  
Pozzolanic Properties

Manufacturing of Portland cement consists of high volume of natural aggregates which depleted rapidly in today construction field. New substitutable material such as bottom ash replace and target for comparable properties with hydraulic or pozzolanic properties as Portland cement. This study investigates the replacement of different sizes of bottom ash into Portland cement by reducing the content of Portland cement and examined the mechanism between bottom ash (BA) and Portland cement. A cement composite developed by 10% replacement with 1, 7, 14, and 28 days of curing and exhibited excellent mechanical strength on day 28 (34.23 MPa) with 63 mm BA. The porous structure of BA results in lower density as the fineness particles size contains high specific surface area and consume high quantity of water. The morphology, mineralogical, and ternary phase analysis showed that pozzolanic reaction of bottom ash does not alter but complements and integrates the cement hydration process which facilitate effectively the potential of bottom ash to act as construction material.

Complete determination of the material composition of municipal solid waste incineration bottom ash

2020 ◽  
Vol 102 ◽  
pp. 677-685 ◽  
Author(s):  
Florian Huber ◽  
Dominik Blasenbauer ◽  
Philipp Aschenbrenner ◽  
Johann Fellner
Keyword(s):  
Municipal Solid Waste ◽  
Solid Waste ◽  
Bottom Ash ◽  
Waste Incineration ◽  
Material Composition ◽  
Municipal Solid Waste Incineration ◽  
Complete Determination

Comparative study on utilization of different types of municipal solid waste incineration bottom ash for clinker sintering

2020 ◽  
Vol 22 (6) ◽  
pp. 1828-1843
Author(s):  
Yin-Ming Li ◽  
Xue-Qian Wu ◽  
Lin-Jun Wang ◽  
Rui-Qing Li ◽  
Tian-Yong Huang ◽  
...  
Keyword(s):  
Comparative Study ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Bottom Ash ◽  
Waste Incineration ◽  
Municipal Solid Waste Incineration ◽  
Different Types

Environmental Sustainability through Recycling Incineration Bottom Ash for the Production of Autoclaved Aerated Concrete

2015 ◽  
Vol 650 ◽  
pp. 51-70 ◽  
Author(s):  
En Hua Yang ◽  
Yi Quan Liu ◽  
Zhi Tao Chen
Keyword(s):  
Aluminum Powder ◽  
Environmental Sustainability ◽  
Pure Aluminum ◽  
Bottom Ash ◽  
Waste Incineration ◽  
Gas Generation ◽  
Autoclaved Aerated Concrete ◽  
Silica Source ◽  
Aerated Concrete ◽  
Aeration Capacity

Municipal solid waste incineration bottom ash (IBA) has great potential to be utilized for civil engineering applications. This paper is to investigate the characteristic of gas generation from IBA and to study the potential of IBA as aerating agent to replace costly aluminum powder and as silica source to partially replace silica flour/fly ash in the production of autoclaved aerated concrete (AAC). Results show the aeration capacity of IBA used in this study is about 1% that of pure aluminum powder by mass. Finer particles, higher alkali molarity, and higher reaction temperature encourage the reaction and more gas is generated per gram of IBA. Type of alkaline solution does not seem to be an important factor for gas generation from IBA. Several exemplary lightweight mortars and AACs were produced by incorporating IBA as aerating agent. It is highly plausible IBA can be used as aerating agent to replace pure aluminum powder in the production of normal aerated concrete. IBA-AACs with density ranging from 600 to 800 kg/m3 were successfully synthesized by using IBA as aerating agent. For a given density, the compressive strength of IBA-AAC is higher than that of AAC due to the formation of more uniform pore structure with smaller pore size in IBA-AAC.

The fate of heavy metals and salts during the wet treatment of municipal solid waste incineration bottom ash

2021 ◽  
Vol 121 ◽  
pp. 33-41
Author(s):  
Yanjun Hu ◽  
Lingqin Zhao ◽  
Yonghao Zhu ◽  
Bennong Zhang ◽  
Guixiang Hu ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Bottom Ash ◽  
Waste Incineration ◽  
Municipal Solid Waste Incineration
Sign in / Sign up

Export Citation Format

Share Document