Development of hydraulic fracturing for studying the stressed state of a rock mass

1994 ◽  
Vol 30 (1) ◽  
pp. 1-15 ◽  
Author(s):  
M. V. Kurlenya ◽  
A. V. Leont'ev ◽  
S. N. Popov
Keyword(s):  
Rock Mass ◽  
Hydraulic Fracturing ◽  
Stressed State

scholarly journals Directional Hydraulic Fracturing (DHF) of the Roof, as an Element of Rock Burst Prevention in the Light of Underground Observations and Numerical Modelling

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 562
Author(s):  
Marek Jendryś ◽  
Andrzej Hadam ◽  
Mateusz Ćwiękała
Keyword(s):  
Rock Mass ◽  
Hydraulic Fracturing ◽  
Coal Mining ◽  
Rock Burst ◽  
Coal Mine ◽  
Seismic Activity ◽  
Black Coal ◽  
Directional Hydraulic Fracturing ◽  
Before And After ◽  
The Face

The following article analyzes the effectiveness of directional hydraulic fracturing (DHF) as a method of rock burst prevention, used in black coal mining with a longwall system. In order to define changes in seismic activity due to DHF at the “Rydułtowy” Black Coal Mine (Upper Silesia, Poland), observations were made regarding the seismic activity of the rock mass during coal mining with a longwall system using roof layers collapse. The seismic activity was recorded in the area of the longwall itself, where, on a part of the runway, the rock mass was expanded before the face of the wall by interrupting the continuity of the rock layers using DHF. The following article presents measurements in the form of the number and the shock energy in the area of the observed longwall, which took place before and after the use of DHF. The second part of the article unveils the results of numerical modeling using the discrete element method, allowing to track the formation of goafs for the variant that does not take DHF into consideration, as well as with modeled fractures tracing DHF carried out in accordance with the technology used at “Rydułtowy” coal mine.

scholarly journals Elastoplastic Analysis of Circular Opening Based on a New Strain-Softening Constitutive Model and Its Engineering Application in Hydraulic Fracturing

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
T. Yang ◽  
Q. S. Ye
Keyword(s):  
Rock Mass ◽  
Constitutive Model ◽  
Hydraulic Fracturing ◽  
Bearing Capacity ◽  
Fracture Zone ◽  
Strain Softening ◽  
Circular Opening ◽  
Elastic Peak ◽  
Load Bearing ◽  
Plastic Model

Constitutive effect is extremely important for the research of the mechanical behavior of surrounding rock in hydraulic fracturing engineering. In this paper, based on the triaxial test results, a new elastic-peak plastic-softening-fracture constitutive model (EPSFM) is proposed by considering the plastic bearing behavior of the rock mass. Then, the closed-form solution of a circular opening is deduced with the nonassociated flow rule under the cavity expansion state. Meanwhile, the parameters of the load-bearing coefficient and brittles coefficient are introduced to describe the plastic bearing capacity and strain-softening degrees of rock masses. When the above two parameters take different values, the new solution of EPSFM can be transformed into a series of traditional solutions obtained based on the elastic-perfectly plastic model (EPM), elastic-brittle plastic model (EBM), elastic-strain-softening model (ESM), and elastic-peak plastic-brittle plastic model (EPBM). Therefore, it can be applied to a wider range of rock masses. In addition, the correctness of the solution is validated by comparing with the traditional solutions. The effect of constitutive relation and parameters on the mechanical response of rock mass is also discussed in detail. The research results show that the fracture zone radii of circular opening presents the characteristic of EBM > EPBM > ESM > EPSFM; otherwise, it is on the contrast for the critical hydraulic pressure at the softening-fracture zone interface; the postpeak failure radii show a linear decrease with the increase of load-bearing coefficients or a nonlinear increase with the increasing brittleness coefficient. This study indicates that the rock mass with a certain plastic bearing capacity is more difficult to be cracked by hydraulic fracturing; the higher the strain-softening degree of rock mass is, the easier it is to be cracked. From a practical point of view, it provides very important theoretical values for determining the fracture range of the borehole and providing a design value of the minimum pumping pressure in hydraulic fracturing engineering.

scholarly journals Influence of unloading slots on the stressed state and creep of a rock mass in the vicinity of an excavation

2011 ◽  
Vol 4 (2) ◽  
pp. 110-118 ◽  
Author(s):  
V.M. Pestrenin ◽  
I.V. Pestrenina ◽  
P.P. Kostromina
Keyword(s):  
Rock Mass ◽  
Stressed State

The Application of Hydraulic Fracturing in Storage Projects of Liquefied Petroleum Gas

2006 ◽  
Vol 306-308 ◽  
pp. 1509-1514 ◽  
Author(s):  
Jing Feng ◽  
Qian Sheng ◽  
Chao Wen Luo ◽  
Jing Zeng
Keyword(s):  
Rock Mass ◽  
Hydraulic Fracturing ◽  
Stress Measurement ◽  
Test Procedure ◽  
In Situ Stress ◽  
Test System ◽  
Petroleum Engineering ◽  
Liquefied Petroleum Gas

It is very important to study the pristine stress field in Civil, Mining, Petroleum engineering as well as in Geology, Geophysics, and Seismology. There are various methods of determination of in-situ stress in rock mass. However, hydraulic fracturing techniques is the most convenient method to determine and interpret the test results. Based on an hydraulic fracturing stress measurement campaign at an underground liquefied petroleum gas storage project which locates in ZhuHai, China, this paper briefly describes the various uses of stress measurement, details of hydraulic fracturing test system, test procedure adopted and the concept of hydraulic fracturing in arriving at the in-situ stresses of the rock mass.

scholarly journals Numerical Modeling on Hydraulic Fracturing in Coal-Rock Mass for Enhancing Gas Drainage

2018 ◽  
Vol 2018 ◽  
pp. 1-16 ◽  
Author(s):  
Zhigang Yuan ◽  
Yaohua Shao
Keyword(s):  
Mathematical Model ◽  
Rock Mass ◽  
Hydraulic Fracturing ◽  
Gas Flow ◽  
Numerical Solutions ◽  
Fracture Initiation ◽  
Engineering Practice ◽  
Gas Drainage ◽  
Fracturing Process ◽  
Coal Rock

The mechanism of how hydraulic fracturing influences gas drainage in coal-rock mass is still not clear due to its complex mechanism. In this work, statistical distributions are firstly introduced to describe heterogeneity of coal-rock mass; a novel simultaneously coupled mathematical model, which can describe the fully coupled process including seepage-damage coupling during hydraulic fracturing process and subsequent gas flow during gas drainage process, is established; its numerical implementation procedure is coded into a Matlab program to calculate the damage variables, and it partly uses COMSOL solver to obtain numerical solutions of governing equations with damage-flow coupling; the mathematical model and its implementation are validated for initial damage pressure and mode of a single solid model without considering flow-damage coupling, as well as fracture initiation pressure and influence of heterogeneity on damage evolution of hydraulic fracturing considering flow-damage coupling; and finally, based on an engineering practice of hydraulic fracturing with two boreholes, the mechanism of how hydraulic fracturing influences gas drainage is investigated, numerical simulation results indicate that coal-rock mass pore-fissure structure has been improved, and there would exist a gas migration channel with characteristics of higher porosity and lower stresses, which demonstrates significant effects and mechanism of hydraulic fracturing on improving coal-rock permeability and enhancing gas drainage. The research results provide a guide for operation of hydraulic fracturing and optimal layout of gas drainage boreholes.

The Study of Fractured Rock Mass Instability of the Law Based on the Hydraulic Fracturing

2012 ◽  
Vol 496 ◽  
pp. 538-541
Author(s):  
Zhi Qiang Kang ◽  
Wein Jie Li ◽  
Yu Bo Jia
Keyword(s):  
Rock Mass ◽  
Hydraulic Fracturing ◽  
Hydraulic Fracture ◽  
Fractured Rock ◽  
Water Pressure ◽  
Overburden Rock ◽  
Fractured Rock Mass ◽  
Water Seepage ◽  
Vertical Loading ◽  
The Law

Fractured rock mass, Hydraulic fracture, RFPA2D-Flow, Instability of the law. Abstract. Based on the theory of fluid-solid coupling, Studying on the effect of permeability about damage and stress, Analysis of influence factors what hydraulic fracturing process, fracture propagation pattern, and influencing factors including shape and magnitude of inlet hole, stress conditions, and specimen strength were investigated. Application of rock failure process analysis software coupled seepage-stress F-RFPA2D, numerical simulated rock water pressure to cause crack rupture instability process, research the fracture law of the rock on water pressure and vertical loading. Combine similar physical experiment model, contrast analysis of two broken results and stress-strain curve, reveals instability mechanical behavior of rock hydraulic fracture process. Obtain deep mining in the process of mine water seepage and water extrude, overburden rock crack up, expand, water seepage, water extrude, instability rupture process rules.

The effect of stress on the primary permeability of rock cores—a facet of hydraulic fracturing

1981 ◽  
Vol 18 (2) ◽  
pp. 195-204 ◽  
Author(s):  
R. Heystee ◽  
J.-C. Roegiers
Keyword(s):  
Rock Mass ◽  
Hydraulic Fracturing ◽  
The State ◽  
Stress Conditions ◽  
Breakdown Pressure ◽  
Rock Types ◽  
State Of Stress ◽  
Pressurization Rate ◽  
Fluid Penetration ◽  
Fracturing Experiments

Recent laboratory hydraulic fracturing experiments have shown that fluid penetration into the rock mass adjacent to the borehole being pressurized has a significant influence on the magnitude of the breakdown pressure. One factor affecting the degree of penetration of the pressurizing fluid is the permeability of the rock mass, which in turn is a function of the state of stress present in the rock mass. To study this permeability–stress relationship, a radial permeameter was constructed and three rock types tested. Derived expressions show that during radially divergent and convergent flow in the permeameter, the state of stress in the rock specimen is tensile and compressive respectively. The radial permeameter test results show that the permeability of rock increases significantly under tensile stress conditions and reduces under compressive stress conditions. The results from this study were used to develop a conceptual model which explains the dependency of breakdown pressure levels on the pressurization rate.

Stressed state of the rock mass during excavation of the underground machine gallery for the Inguri hydroelectric plant

1978 ◽  
Vol 12 (2) ◽  
pp. 118-123
Author(s):  
S. A. Yufin ◽  
T. G. Chincharauli
Keyword(s):  
Rock Mass ◽  
Stressed State ◽  
Hydroelectric Plant ◽  
Machine Gallery

Effect of excavation on the stressed state of a rock mass in the vicinity of a preparatory working

1972 ◽  
Vol 8 (5) ◽  
pp. 498-501
Author(s):  
I. A. Gorovykh ◽  
P. V. Akimochkin
Keyword(s):  
Rock Mass ◽  
Stressed State ◽  
Preparatory Working

scholarly journals Numerical investigation on rules of fracture propagation during hydraulic fracturing in heterogeneous coal-rock mass

2019 ◽  
Vol 21 (4) ◽  
pp. 1147-1162 ◽  
Author(s):  
Zhigang Yuan ◽  
Yaohua Shao ◽  
Donghai Xie ◽  
Fei Huang
Keyword(s):  
Rock Mass ◽  
Hydraulic Fracturing ◽  
Numerical Investigation ◽  
Fracture Propagation ◽  
Coal Rock
Sign in / Sign up

Export Citation Format

Share Document