Combined estimate of the mechanical properties of a rock mass at great depth at the deposit-surveying stage

1983 ◽  
Vol 19 (1) ◽  
pp. 24-31
Author(s):  
G. D. Manev
Keyword(s):  
Mechanical Properties ◽  
Rock Mass ◽  
Great Depth

scholarly journals Determination of Mechanical Properties of Altered Dacite by Laboratory Methods

Minerals ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 813
Author(s):  
Veljko Rupar ◽  
Vladimir Čebašek ◽  
Vladimir Milisavljević ◽  
Dejan Stevanović ◽  
Nikola Živanović
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Rock Mass ◽  
Uniaxial Compressive Strength ◽  
Rock Material ◽  
Strength Parameter ◽  
Gradual Transition ◽  
Strength Parameters ◽  
Triaxial Compressive Strength ◽  
Heterogeneous Rock

This paper presents a methodology for determining the uniaxial and triaxial compressive strength of heterogeneous material composed of dacite (D) and altered dacite (AD). A zone of gradual transition from altered dacite to dacite was observed in the rock mass. The mechanical properties of the rock material in that zone were determined by laboratory tests of composite samples that consisted of rock material discs. However, the functional dependence on the strength parameter alteration of the rock material (UCS, intact UCS of the rock material, and mi) with an increase in the participation of “weaker” rock material was determined based on the test results of uniaxial and triaxial compressive strength. The participation of altered dacite directly affects the mode and mechanism of failure during testing. Uniaxial compressive strength (σciUCS) and intact uniaxial compressive strength (σciTX) decrease exponentially with increased AD volumetric participation. The critical ratio at which the uniaxial compressive strength of the composite sample equals the strength of the uniform AD sample was at a percentage of 30% AD. Comparison of the obtained exponential equation with practical suggestions shows a good correspondence. The suggested methodology for determining heterogeneous rock mass strength parameters allows us to determine the influence of rock material heterogeneity on the values σciUCS, σciTX, and constant mi. Obtained σciTX and constant mi dependences define more reliable rock material strength parameter values, which can be used, along with rock mass classification systems, as a basis for assessing rock mass parameters. Therefore, it is possible to predict the strength parameters of the heterogeneous rock mass at the transition of hard (D) and weak rock (AD) based on all calculated strength parameters for different participation of AD.

scholarly journals Research on Deformation Mechanisms of a High Geostress Soft Rock Roadway and Double-Shell Grouting Technology

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Fengnian Wang ◽  
Shizhuang Chen ◽  
Pan Gao ◽  
Zhibiao Guo ◽  
Zhigang Tao
Keyword(s):  
Mechanical Properties ◽  
Rock Mass ◽  
Large Deformation ◽  
Coal Mine ◽  
Soft Rock ◽  
In Situ Stress ◽  
Deformation Monitoring ◽  
Deformation And Failure ◽  
Working Face ◽  
High Geostress

In this study, the deformation characteristics and mechanical properties of coal and rock mass in the S2N5 working face of the Xiaokang coal mine are analyzed to address the problem of large deformation of soft rocks with high in situ stress surrounding roadways. Through a newly developed grouting pipe, a double-shell grouting technology, consisting of low-pressure grouting and high-pressure split grouting, is proposed for the Xiaokang coal mine. In addition, the effect of grouting is evaluated by borehole peeping and deformation monitoring. The results show that the double-shell grouting technology can effectively improve the overall mechanical properties of the surrounding coal and rock mass, preventing the large deformation and failure of the roadway. This technology can be useful when analyzing and preventing large deformation of soft rock roadways.

scholarly journals Determination and quality classification of rock mass of the Diatomite mine, Algeria

2021 ◽  
Vol 1 ◽  
pp. 17-24
Author(s):  
Abdessattar LAMAMRA ◽  
◽  
Dmitriy Leonidovich NEGURITSA ◽  
Samir BEDR ◽  
Ariant A. REKA ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Rock Mass ◽  
Underground Mining ◽  
Physical And Mechanical Properties ◽  
Friction Angle ◽  
Classification Systems ◽  
Natural Phenomenon ◽  
Underground Structures ◽  
Dilatancy Angle ◽  
Mining Work

Reserch relaevance. Most ground movements are generally due to rock instability, this natural phenomenon poses a risk to humanity. The properties of the rock mass directly influence the type of movement especially in underground structures. Research aim. Our goal is to characterize and classify the rock mass of diatomite from the sig mine using geomechanical classification systems such as the RQD and RMR in order to determine the quality of the rocks in the sig mine Western Algeria from the determination of the physical and mechanical properties. Methodology. In this article, the characterization analysis of the diatomite rock mass of the sig mine was carried out. First, determinations of the physical properties and carried out the triaxial test to determine the mechanical properties (young’s modulus, the friction angle, the dilatancy angle, the cohesion, the poisson’s ratio). Secondly to classify the deposit and give a recommendation to avoid stability problems. Research results. The results from physical and mechanical analyzes, it can be said that the nature of the rock present in the diatomite (underground mine) does not have enough resistance. Conclusion. Our study definitively proves that the rock mass of sig diatomite is of very low quality and it will be very dangerous for the underground mining work of the mine especially in places where the mineralized layer is very deep. And we suggest to replace the mining technique room and pillar currently used in the diatomite mine and put another mining method which includes roof support system to ensure the safety both of the miners and the equipment.

scholarly journals Investigation for Influences of Seepage on Mechanical Properties of Rocks Using Acoustic Emission Technique

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Saisai Wu ◽  
Xiaohan Zhang ◽  
Junping Li ◽  
Zhao Wang
Keyword(s):  
Mechanical Properties ◽  
Acoustic Emission ◽  
Rock Mass ◽  
Shear Failure ◽  
Great Influence ◽  
Average Energy ◽  
Acoustic Emission Technique ◽  
Failure Patterns ◽  
Initial Rupture ◽  
Emission System

The behavior of rock mass is governed by the properties of both the rock material and discontinuities in the rock mass. Surrounding environments including the existence of water also have a great influence on the behavior and mechanical properties of rocks. In this study, a novel-designed compression and seepage testing system, associated with an acoustic emission system, was designed and constructed. The changes in the specimens resulting from the uniaxial compression were monitored by an acoustic emission technique. The characteristics of the acoustic emission parameters at different stages including compaction and crack initiation, crack propagation, and catastrophic failure were analyzed. The existence of seepage had direct influences on the mechanical properties and failure patterns of the specimens. The specimens tested in pure compression conditions demonstrated strong burst proneness and ruptured into separate pieces, while for the specimens with seepage, no burst proneness was observed and the specimens tended to fail along a macroscopic shear failure plane. The highest average energy of the acoustic signal occurred at the stage of initial rupture of rock specimens, rather than at the stage of widespread rupture. The studies explored the possibilities of using the acoustic emission technique to investigate the problems associated with the seepage in geotechnical and rock engineering and provided meaningful results for further research in this field.

scholarly journals Estimation of Coal and Rock Mechanical Properties for Numerical Modelling of Longwall Extraction

2020 ◽  
Vol 1 (2) ◽  
Author(s):  
Tien Dung Le ◽  
Chi Thanh NGUYEN ◽  
Van Chi DAO
Keyword(s):  
Mechanical Properties ◽  
Rock Mass ◽  
Numerical Modelling ◽  
Deformation Modulus ◽  
Published Data ◽  
Rock Mass Properties ◽  
Mass Properties ◽  
Rock Mechanical Properties ◽  
Simple Numerical Model

Reliable estimation of coal and rock mechanical properties at field scale is a prerequisite for numerical modelling of rock behaviours associated with longwall extraction. This paper describes a systematic approach from data collection, laboratory testing to rock mass properties derivation for simulation of longwall extraction, taking two longwall panels at Quang Ninh coalfield in Vietnam for example. The mechanical properties are verified through comparison with published data of the field, indicating close agreements. A simple numerical model is further developed to demonstrate the proper use of the obtained data. The simulation suggests that the ratio of model length to excavation length should be in the range of 2.5–5; uniaxial compressive strength, deformation modulus and tensile strength can be reduced by a factor of 5.0, 2.13 and 2.0, respectively; and a calibration and validation process must be performed to match in-situ longwall’s behaviours. The approach can be applied for derivation of reliable rock mass properties for numerical simulation of underground excavations.

Sign in / Sign up

Export Citation Format

Share Document