Does energy aid improve energy efficiency in developing countries?

2020 ◽  
Author(s):  
Admasu Asfaw Maruta ◽  
Rajabrata Banerjee
Keyword(s):  
Energy Efficiency ◽  
Developing Countries ◽  
Improve Energy Efficiency

scholarly journals Empirical Investigation of Barriers and Driving Forces for Efficient Energy Management Practices in Non-Energy-Intensive Manufacturing Industries of Bangladesh

2019 ◽  
Vol 11 (9) ◽  
pp. 2671 ◽  
Author(s):  
A. S. M. Monjurul Hasan ◽  
Rakib Hossain ◽  
Rashedul Amin Tuhin ◽  
Taiyeb Hasan Sakib ◽  
Patrik Thollander
Keyword(s):  
Energy Efficiency ◽  
Developing Countries ◽  
Energy Management ◽  
Management Practices ◽  
Driving Forces ◽  
Capital Expenditure ◽  
Developed Countries ◽  
Manufacturing Industries ◽  
Improve Energy Efficiency ◽  
Energy Intensive Industries

Improved energy efficiency is being considered as one of the significant challenges to mitigating climate change all over the world. While developed countries have already adopted energy management and auditing practices to improve energy efficiency, the developing countries lag far behind. There are a limited number of studies which have been conducted in the context of developing countries, which mostly revolve around highly energy-intensive sectors. This study looks into the existence and importance of the challenges to and motivating forces for the adoption of energy management practices in Bangladesh, a developing country, focusing on the non-energy-intensive manufacturing industries. Conducted as a multiple case study, the results indicate the existence of several barriers towards adopting and implementing the management of energy practices in the non-energy-intensive industries of Bangladesh, where among them, “other preferences for capital venture” and “inadequate capital expenditure” are the most dominant. This study also identified a number of driving forces that can accelerate the acceptance of energy efficiency practices, such as the demands from the owner, loans, subsidies, and a lowered cost–benefit ratio. Findings of this study could assist the concerned stakeholders to develop beneficial policies and a proper regulatory framework for the non-energy-intensive industries of developing countries like Bangladesh.

scholarly journals Are Cross-Border Classes Feasible for Students to Collaborate in the Analysis of Energy Efficiency Strategies for Socioeconomic Development While Keeping CO2 Concentration Controlled?

2021 ◽  
Vol 13 (3) ◽  
pp. 1584
Author(s):  
Roberto Araya ◽  
Pedro Collanqui
Keyword(s):  
Energy Efficiency ◽  
Socioeconomic Development ◽  
Concept Maps ◽  
Research Question ◽  
Co2 Concentration ◽  
Asia Pacific ◽  
School Students ◽  
Improve Energy Efficiency ◽  
Cross Border ◽  
Science Classes

Education is critical for improving energy efficiency and reducing CO2 concentration, but collaboration between countries is also critical. It is a global problem in which we cannot isolate ourselves. Our students must learn to collaborate in seeking solutions together with others from other countries. Thus, the research question of this study is whether interactive cross-border science classes with energy experiments are feasible and can increase awareness of energy efficiency among middle school students. We designed and tested an interactive cross-border class between Chilean and Peruvian eighth-grade classes. The classes were synchronously connected and all students did experiments and answered open-ended questions on an online platform. Some of the questions were designed to check conceptual understanding whereas others asked for suggestions of how to develop their economies while keeping CO2 air concentration at acceptable levels. In real time, the teacher reviewed the students’ written answers and the concept maps that were automatically generated based on their responses. Students peer-reviewed their classmates’ suggestions. This is part of an Asia-Pacific Economic Cooperation (APEC) Science Technology Engineering Mathematics (STEM) education project on energy efficiency using APEC databases. We found high levels of student engagement, where students discussed not only the cross-cutting nature of energy, but also its relation to socioeconomic development and CO2 emissions, and the need to work together to improve energy efficiency. In conclusion, interactive cross-border science classes are a feasible educational alternative, with potential as a scalable public policy strategy for improving awareness of energy efficiency among the population.

scholarly journals Energy efficiency from the perspective of developing countries

1994 ◽  
Vol 1 (2) ◽  
pp. 28-34 ◽  
Author(s):  
Jose Goldemberg ◽  
Thomas B. Johansson ◽  
Amulya K.N. Reddy ◽  
Robert H. Williams
Keyword(s):  
Energy Efficiency ◽  
Developing Countries

scholarly journals Dimensionless Analysis on the Characteristics of Pneumatic Booster Valve with Energy Recovery

2016 ◽  
Vol 2016 ◽  
pp. 1-13
Author(s):  
Fan Yang ◽  
Kotaro Tadano ◽  
Gangyan Li ◽  
Toshiharu Kagawa
Keyword(s):  
Mathematical Model ◽  
Energy Efficiency ◽  
Energy Recovery ◽  
Operational Parameters ◽  
Local Pressure ◽  
Air Power ◽  
Improve Energy Efficiency ◽  
Dimensionless Analysis ◽  
Air Supply ◽  
Save Energy

Factories are increasingly reducing their air supply pressures in order to save energy. Hence, there is a growing demand for pneumatic booster valves to overcome the local pressure deficits in modern pneumatic systems. To further improve energy efficiency, a new type of booster valve with energy recovery (BVER) is proposed. The BVER principle is presented in detail, and a dimensionless mathematical model is established based on flow rate, gas state, and energy conservation. The mathematics model was transformed into a dimensionless model by accurately selecting the reference values. Subsequently the dimensionless characteristics of BVER were found. BVER energy efficiency is calculated based on air power. The boost ratio is found to be mainly affected by the operational parameters. Among the structural ones, the recovery/boost chamber area ratio and the sonic conductance of the chambers are the most influential. The boost ratio improves by 15%–25% compared to that of a booster valve without an energy recovery chamber. The efficiency increases by 5%–10% depending on the supply pressure. A mathematical model is validated by experiment, and this research provides a reference for booster valve optimisation and energy saving.

scholarly journals Technological Energy Efficiency Improvements in Cement Industries

2021 ◽  
Vol 13 (7) ◽  
pp. 3810
Author(s):  
Alessandra Cantini ◽  
Leonardo Leoni ◽  
Filippo De Carlo ◽  
Marcello Salvio ◽  
Chiara Martini ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Descriptive Analysis ◽  
Cement Industry ◽  
Cement Plant ◽  
Improve Energy Efficiency ◽  
Energy Needs ◽  
Industrial Energy ◽  
Industrial Energy Consumption ◽  
Alternative Solutions

The cement industry is highly energy-intensive, consuming approximately 7% of global industrial energy consumption each year. Improving production technology is a good strategy to reduce the energy needs of a cement plant. The market offers a wide variety of alternative solutions; besides, the literature already provides reviews of opportunities to improve energy efficiency in a cement plant. However, the technology is constantly developing, so the available alternatives may change within a few years. To keep the knowledge updated, investigating the current attractiveness of each solution is pivotal to analyze real companies. This article aims at describing the recent application in the Italian cement industry and the future perspectives of technologies. A sample of plant was investigated through the analysis of mandatory energy audit considering the type of interventions they have recently implemented, or they intend to implement. The outcome is a descriptive analysis, useful for companies willing to improve their sustainability. Results prove that solutions to reduce the energy consumption of auxiliary systems such as compressors, engines, and pumps are currently the most attractive opportunities. Moreover, the results prove that consulting sector experts enables the collection of updated ideas for improving technologies, thus giving valuable inputs to the scientific research.

Total-factor energy efficiency in developing countries

Energy Policy ◽  
2011 ◽  
Vol 39 (2) ◽  
pp. 644-650 ◽  
Author(s):  
Xing-Ping Zhang ◽  
Xiao-Mei Cheng ◽  
Jia-Hai Yuan ◽  
Xiao-Jun Gao
Keyword(s):  
Energy Efficiency ◽  
Developing Countries

scholarly journals Energy-Efficient Hybrid Routing Protocol for IoT Communication Systems in 5G and Beyond

Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 537
Author(s):  
Mohammad Baniata ◽  
Haftu Tasew Reda ◽  
Naveen Chilamkurti ◽  
Alsharif Abuadbba
Keyword(s):  
Energy Efficiency ◽  
Network Lifetime ◽  
Energy Efficient ◽  
Communication Systems ◽  
Multiple Input Multiple Output ◽  
Sensor Nodes ◽  
Clustering Methods ◽  
Mimo Antenna ◽  
Improve Energy Efficiency ◽  
Art Research

One of the major concerns in wireless sensor networks (WSNs) is most of the sensor nodes are powered through limited lifetime of energy-constrained batteries, which majorly affects the performance, quality, and lifetime of the network. Therefore, diverse clustering methods are proposed to improve energy efficiency of the WSNs. In the meantime, fifth-generation (5G) communications require that several Internet of Things (IoT) applications need to adopt the use of multiple-input multiple-output (MIMO) antenna systems to provide an improved capacity over multi-path channel environment. In this paper, we study a clustering technique for MIMO-based IoT communication systems to achieve energy efficiency. In particular, a novel MIMO-based energy-efficient unequal hybrid clustering (MIMO-HC) protocol is proposed for applications on the IoT in the 5G environment and beyond. Experimental analysis is conducted to assess the effectiveness of the suggested MIMO-HC protocol and compared with existing state-of-the-art research. The proposed MIMO-HC scheme achieves less energy consumption and better network lifetime compared to existing techniques. Specifically, the proposed MIMO-HC improves the network lifetime by approximately 3× as long as the first node and the final node dies as compared with the existing protocol. Moreover, the energy that cluster heads consume on the proposed MIMO-HC is 40% less than that expended in the existing protocol.

Sign in / Sign up

Export Citation Format

Share Document