scholarly journals Growth of LixLaySrzMnO3 thin films by pulsed laser deposition: complex relation between thin film composition and deposition parameters

2021 ◽  
Vol 127 (6) ◽  
Author(s):  
G. Bimashofer ◽  
S. Smetaczek ◽  
E. Gilardi ◽  
C. W. Schneider ◽  
A. Limbeck ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Inductively Coupled Plasma ◽  
Mass Difference ◽  
Pulsed Laser ◽  
Large Mass ◽  
Growth Conditions ◽  
Laser Deposition ◽  
Film Composition

AbstractLixLaySrzMnO3 thin films of various compositions (x,y,z) have been grown using pulsed laser deposition. The compositions of the films have been studied as a function of deposition temperature, target-to-substrate distance and deposition pressure with respect to different cation ratios of the targets by inductively coupled plasma mass spectrometry. When growing multi-elemental oxide thin films containing lithium (with its large mass difference to other elements), lithium loss is most probably inevitable. But the desired thin film composition can be achieved by selecting specific growth conditions and different target compositions. The experiments also elucidate some of the mechanisms behind the incongruent lithium transfer from the targets to thin films.

scholarly journals Deposition pressure-induced microstructure control and plasmonic property tuning in hybrid ZnO-AgxAu1-x thin films

2021 ◽  
Author(s):  
Robynne Lynne PALDI ◽  
Xing Sun ◽  
Xin Li Phuah ◽  
Juanjuan Lu ◽  
Xinghang Zhang ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Pulsed Laser ◽  
Laser Deposition ◽  
Deposition Method ◽  
Hybrid Films ◽  
Deposition Pressure ◽  
Plasmonic Metamaterials ◽  
Film Form

Self-assembled oxide-metallic alloyed nanopillars as hybrid plasmonic metamaterials (e.g., ZnO-AgxAu1-x) in a thin film form are grown using a pulsed laser deposition method. The hybrid films were demonstrated to be...

scholarly journals The Study of Optical and Electrical Properties of Nanostructured Silicon Carbide Thin Films Grown by Pulsed-Laser Deposition

2021 ◽  
Vol 9 (2) ◽  
pp. 46-50
Author(s):  
Muhanad A. Ahmed ◽  
Mohammed F. Mohammed Sabri ◽  
Wathiq R. Abed
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Silicon Carbide ◽  
Absorption Coefficient ◽  
Pulsed Laser Deposition ◽  
Extinction Coefficient ◽  
Pulsed Laser ◽  
Laser Deposition ◽  
Cutoff Wavelength ◽  
Nanostructured Silicon

In this paper, nanostructured silicon carbide (SiC) thin films are deposited onto glass substrate using pulsed laser deposition technique. Electrical and optical characterizations such as conductivity, resistivity, transmission, Seeback effect, absorption, absorption coefficient, energy band gap, and extinction coefficient as a function of photon energy, and the effect of thin films thickness on transmission are carried out to characterize the prepared samples. Results showed that the prepared SiC thin film is an n-type semiconductor with an indirect bandgap of ~3 eV, 448 nm cutoff wavelength, 3.4395 × 104 cm−1 absorption coefficient and 0.154 extinction coefficient. The surface morphology of the SiC thin films is studied using scanning electron microscope at a substrate temperature of 400 °C and it is found that the grain size of the prepared SiC thin film is about 30 nm. As such, the nano thin films optical and structural characteristics enable the films to be used as gases sensors in many optoelectronic devices such as the environment and ultraviolet photodiode.

Preparation and Characterization of MFM and MFIS Structures Using Sr2(Ta1划x, Nbx)2O7 Thin Film by Pulsed Laser Deposition

2000 ◽  
Vol 655 ◽  
Author(s):  
Masanori Okuyama ◽  
Toshiyuki Nakaiso ◽  
Minoru Noda
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Pulsed Laser ◽  
Ferroelectric Thin Films ◽  
Laser Deposition ◽  
Polarization Reversal ◽  
Ambient Gas ◽  
Mfis Structure

AbstractSr2(Ta1划x, Nbx)2O7(STN) ferroelectric thin films have been prepared on SiO2/Si(100) substrates by the pulsed laser deposition (PLD) method. Preferential (110) and (151)-oriented STN thin films are deposited at a low temperature of 600°C in N2O ambient gas at 0.08 Torr. A counterclockwise C-V hysteresis was observed in the metal-ferroelectric-insulator-semiconductor (MFIS) structure using Sr2(Ta0.7, Nb0.3)2O7 on SiO2/Si deposited at 600°C. Memory window in the C-V curve spreads symmetrically towards both positive and negative directions when applied voltage increases and the window does not change in sweep rates ranging from 0.1 to 4.0×103 V/s. The C-V curve of the MFIS structure does not degrade after 1010 cycles of polarization reversal. The gate retention time is about 3.0×103 sec when the voltages and time of write pulse are ±15V and 1.0 sec, respectively, and hold bias was -0.5 V.

scholarly journals The Properties of Zn-Doped AlSb Thin Films Prepared by Pulsed Laser Deposition

Coatings ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 136
Author(s):  
Ping Tang ◽  
Weimin Wang ◽  
Bing Li ◽  
Lianghuan Feng ◽  
Guanggen Zeng
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Band Gap ◽  
Photovoltaic Effect ◽  
Pulsed Laser ◽  
Laser Deposition ◽  
Sem Images ◽  
Glass Substrates ◽  
Substrate Temperatures

Aluminum antimony (AlSb) is a promising photovoltaic material with a band gap of about 1.62 eV. However, AlSb is highly deliquescent and not stable, which has brought great difficulties to the applications. Based on the above situation, there are two purposes for preparing our Zn-doped AlSb (AlSb:Zn) thin films: One is to make P-type AlSb and the other is to find a way to suppress the deliquescence of AlSb. The AlSb:Zn thin films were prepared on glass substrates at different substrate temperatures by using the pulsed laser deposition (PLD) method. The structural, surface morphological, optical, and electrical properties of AlSb:Zn films were investigated. The crystallization of AlSb:Zn thin films was enhanced and the electrical resistivity decreased as the substrate temperature increased. The scanning electron microscopy (SEM) images indicated that the grain sizes became bigger as the substrate temperatures increased. The Raman vibration mode AlSb:Zn films were located at ~107 and ~142 cm−1 and the intensity of Raman peaks was stronger at higher substrate temperatures. In the experiment, a reduced band gap (1.4 eV) of the AlSb:Zn thin film was observed compared to the undoped AlSb films, which were more suitable for thin-film solar cells. Zn doping could reduce the deliquescent speed of AlSb thin films. The fabricated heterojunction device showed the good rectification behavior, which indicated the PN junction formation. The obvious photovoltaic effect has been observed in an FTO/ZnS/AlSb:Zn/Au device.

scholarly journals The Effect of Strontium Doping on LaFeO3 Thin Films Deposited by the PLD Method

Catalysts ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 954
Author(s):  
Anna Cyza ◽  
Łukasz Cieniek ◽  
Tomasz Moskalewicz ◽  
Wojciech Maziarz ◽  
Jan Kusiński ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Catalytic Properties ◽  
Pulsed Laser ◽  
Grain Morphology ◽  
Laser Deposition ◽  
Si Substrate ◽  
Tem Analysis ◽  
Small Grains

The aim of the presented investigations was to deposit the thin films La1−xSrxFeO3 (x = 0, 0.1, 0.2) on (100) Si substrate by using the Pulsed Laser Deposition (PLD) method. Structure was exanimated by using XRD, SEM, AFM, TEM and XPS methods. The catalytic properties were analyzed in 4 ppm acetone atmosphere. The doping of Sr thin films La1−xSrxFeO3 (x = 0, 0.1, 0.2) resulted in a decrease in the size of the crystallites, the volume of the elemental cell and change in the grain morphology. In the LaFeO3 and La0.9Sr0.1FeO3, clusters around which small grains grow are visible in the structure, while in the layer La0.8Sr0.2FeO3, the visible grains are elongated. The TEM analysis has shown that the obtained thin films had a thickness in the range 150–170 nm with triangular or flat column ends. The experiment performed in the presence of gases allowed us to conclude that the surfaces (101/020) in the triangle-shaped columns and the plane (121/200) faces in flat columns were exposed to gases. The best properties in the presence of CH3COCH3 gas were noted for LaFeO3 thin film with triangle columns ending with orientation (101/020).

Studies of thin film ferroelectrics with charge-compensated substitutions in BST

2002 ◽  
Vol 720 ◽  
Author(s):  
Daniel Potrepka ◽  
Steven Tidrow ◽  
Arthur Tauber ◽  
Kevin Kirchner ◽  
Bernard Rod ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Pulsed Laser ◽  
Laser Deposition ◽  
Bulk Materials ◽  
Dielectric Characterization ◽  
Deposition Techniques

AbstractThin films were prepared from bulk targets by pulsed-laser deposition techniques. The targets were composed of Ba0.6Sr0.4TiO3 with charge-compensated substitutions for Ti4+. Results of the dielectric characterization measurements will be discussed and compared to the results of similar measurements in bulk materials with the same composition.

scholarly journals Epitaxial growth and magnetic/transport properties of La0.7Sr0.3MnO3 thin films grown on SrTiO3 with optimized growth conditions

RSC Advances ◽  
2017 ◽  
Vol 7 (50) ◽  
pp. 31327-31332 ◽  
Author(s):  
K. Wang ◽  
M. H. Tang ◽  
Y. Xiong ◽  
G. Li ◽  
Y. G. Xiao ◽  
...  
Keyword(s):  
Thin Films ◽  
Single Crystal ◽  
Pulsed Laser Deposition ◽  
Transport Properties ◽  
Epitaxial Growth ◽  
Pulsed Laser ◽  
Growth Conditions ◽  
Laser Deposition ◽  
Colossal Magnetoresistive ◽  
Magnetic Transport

Epitaxial growth of colossal magnetoresistive thin films of La0.7Sr0.3MnO3 (LSMO) has been achieved on TiO2-terminated (001) SrTiO3 (STO) single-crystal substrates using PLD (pulsed laser deposition).

scholarly journals Influence of the growth conditions on the transparent conductive properties of ZnO：Al thin films grown by pulsed laser deposition

2013 ◽  
Vol 62 (21) ◽  
pp. 216102
Author(s):  
Han Jun ◽  
Zhang Peng ◽  
Gong Hai-Bo ◽  
Yang Xiao-Peng ◽  
Qiu Zhi-Wen ◽  
...  
Keyword(s):  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Pulsed Laser ◽  
Growth Conditions ◽  
Laser Deposition ◽  
Conductive Properties

Hardness Optimization of (Cr,Mg)(N,O) Thin Films Prepared by Pulsed Laser Deposition

2006 ◽  
Vol 11-12 ◽  
pp. 311-314 ◽  
Author(s):  
Hiroki Asami ◽  
Jun Inoue ◽  
M. Hirai ◽  
Tsuneo Suzuki ◽  
Tadachika Nakayama ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Pulsed Laser ◽  
Magnesium Content ◽  
Area Ratio ◽  
Laser Deposition ◽  
Metallic Elements ◽  
Surface Area Ratio ◽  
X Ray

Chromium magnesium oxynitride ((Cr,Mg)(N,O)) thin films have been prepared by pulsed laser deposition (PLD) method with changing the surface area ratio of Mg target (SR) from 0 to 100 %. As a result of the analysis by energy dispersive X-ray spectroscopy (EDX), it was found that magnesium content in the total metallic elements (Cr1-x, Mgx) are controlled by changing SR from 0 to 100 % to be the x ranging from 0 to 1.0. Since the crystal structure of main phase in all thin films was found to be NaCl type, the XRD results showed that the thin films were mainly consisted of (Cr,Mg)(N,O). The hardness of (Cr,Mg)(N,O) thin films were increased almost linearly up to SR = 50 %, above which it decreases rapidly. The maximum Vickers hardness (HV) of 3600 was obtained for the thin film which was prepared by SR = 50 %, and the minimum HV of 1650 was obtained for the thin film which was prepared by SR = 100 %.

The effect of target crystallography on the growth of Pb(Mg1/3Nb2/3)O3 thin films using pulsed laser deposition

1999 ◽  
Vol 14 (6) ◽  
pp. 2355-2358 ◽  
Author(s):  
M. H. Corbett ◽  
G. Catalan ◽  
R. M. Bowman ◽  
J. M. Gregg
Keyword(s):  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Pulsed Laser ◽  
Growth Conditions ◽  
Laser Deposition ◽  
X Ray Diffraction ◽  
Plan View ◽  
X Ray ◽  
Transmission Electron ◽  
Lead Magnesium

Pulsed laser deposition has been used to make two sets of lead magnesium niobate thin films grown on single-crystal h100j MgO substrates. One set was fabricated using a perovskite-rich target while the other used a pyrochlore-rich target. It was found that the growth conditions required to produce almost 100% perovskite Pb(Mg1/3Nb2/3)O3 (PMN) films were largely independent of target crystallography. Films were characterized crystallographically using x-ray diffraction and plan view transmission electron microscopy, chemically using energy dispersive x-ray analysis, and electrically by fabricating a planar thin film capacitor structure and monitoring capacitance as a function of temperature. All characterization techniques indicated that perovskite PMN thin films had been successfully fabricated.

Sign in / Sign up

Export Citation Format

Share Document