scholarly journals Intercomparison of oceanic and atmospheric forced and coupled mesoscale simulations Part I: Surface fluxes

1999 ◽  
Vol 17 (4) ◽  
pp. 566-576 ◽  
Author(s):  
P. Josse ◽  
G. Caniaux ◽  
H. Giordani ◽  
S. Planton
Keyword(s):  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Heat Budget ◽  
Weather Forecast ◽  
Atmospheric Model ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Sea Surface ◽  
Storm Event ◽  
Fine Mesh

Abstract. A mesoscale non-hydrostatic atmospheric model has been coupled with a mesoscale oceanic model. The case study is a four-day simulation of a strong storm event observed during the SEMAPHORE experiment over a 500 × 500 km2 domain. This domain encompasses a thermohaline front associated with the Azores current. In order to analyze the effect of mesoscale coupling, three simulations are compared: the first one with the atmospheric model forced by realistic sea surface temperature analyses; the second one with the ocean model forced by atmospheric fields, derived from weather forecast re-analyses; the third one with the models being coupled. For these three simulations the surface fluxes were computed with the same bulk parametrization. All three simulations succeed well in representing the main oceanic or atmospheric features observed during the storm. Comparison of surface fields with in situ observations reveals that the winds of the fine mesh atmospheric model are more realistic than those of the weather forecast re-analyses. The low-level winds simulated with the atmospheric model in the forced and coupled simulations are appreciably stronger than the re-analyzed winds. They also generate stronger fluxes. The coupled simulation has the strongest surface heat fluxes: the difference in the net heat budget with the oceanic forced simulation reaches on average 50 Wm-2 over the simulation period. Sea surface-temperature cooling is too weak in both simulations, but is improved in the coupled run and matches better the cooling observed with drifters. The spatial distributions of sea surface-temperature cooling and surface fluxes are strongly inhomogeneous over the simulation domain. The amplitude of the flux variation is maximum in the coupled run. Moreover the weak correlation between the cooling and heat flux patterns indicates that the surface fluxes are not responsible for the whole cooling and suggests that the response of the ocean mixed layer to the atmosphere is highly non-local and enhanced in the coupled simulation.Key words. Oceanography: physical (air · sea interac- tion; eddies and mesoscale processes). Meteorology and atmospheric dynamics (ocean · atmosphere interactions)

scholarly journals The Effect of Diurnal Sea Surface Temperature Warming on Climatological Air–Sea Fluxes

2013 ◽  
Vol 26 (8) ◽  
pp. 2546-2556 ◽  
Author(s):  
Carol Anne Clayson ◽  
Alec S. Bogdanoff
Keyword(s):  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Heat Budget ◽  
Longwave Radiation ◽  
Heat Fluxes ◽  
Sea Surface ◽  
Diurnal Variability ◽  
Diurnal Warming ◽  
Yearly Average ◽  
The Difference

Abstract Diurnal sea surface warming affects the fluxes of latent heat, sensible heat, and upwelling longwave radiation. Diurnal warming most typically reaches maximum values of 3°C, although very localized events may reach 7°–8°C. An analysis of multiple years of diurnal warming over the global ice-free oceans indicates that heat fluxes determined by using the predawn sea surface temperature can differ by more than 100% in localized regions over those in which the sea surface temperature is allowed to fluctuate on a diurnal basis. A comparison of flux climatologies produced by these two analyses demonstrates that significant portions of the tropical oceans experience differences on a yearly average of up to 10 W m−2. Regions with the highest climatological differences include the Arabian Sea and the Bay of Bengal, as well as the equatorial western and eastern Pacific Ocean, the Gulf of Mexico, and the western coasts of Central America and North Africa. Globally the difference is on average 4.45 W m−2. The difference in the evaporation rate globally is on the order of 4% of the total ocean–atmosphere evaporation. Although the instantaneous, year-to-year, and seasonal fluctuations in various locations can be substantial, the global average differs by less than 0.1 W m−2 throughout the entire 10-yr time period. A global heat budget that uses atmospheric datasets containing diurnal variability but a sea surface temperature that has removed this signal may be underestimating the flux to the atmosphere by a fairly constant value.

scholarly journals U.S. West Coast Surface Heat Fluxes, Wind Stress, and Wind Stress Curl from a Mesoscale Model

2005 ◽  
Vol 133 (11) ◽  
pp. 3202-3216 ◽  
Author(s):  
T. Haack ◽  
S. D. Burk ◽  
R. M. Hodur
Keyword(s):  
Relative Humidity ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Wind Stress ◽  
Mesoscale Model ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Sea Surface ◽  
Wind Stress Curl ◽  
Low Level

Abstract Monthly averages of numerical model fields are beneficial for depicting patterns in surface forcing such as sensible and latent heat fluxes, wind stress, and wind stress curl over data-sparse ocean regions. Grid resolutions less than 10 km provide the necessary mesoscale detail to characterize the impact of a complex coastline and coastal topography. In the present study a high-resolution mesoscale model is employed to reveal patterns in low-level winds, temperature, relative humidity, sea surface temperature as well as surface fluxes, over the eastern Pacific and along the U.S. west coast. Hourly output from successive 12-h forecasts are averaged to obtain monthly mean patterns from each season of 1999. The averages yield information on interactions between the ocean and the overlying atmosphere and on the influence of coastal terrain forcing in addition to their month-to-month variability. The spring to summer transition is characterized by a dramatic shift in near-surface winds, temperature, and relative humidity as offshore regions of large upward surface fluxes diminish and an alongshore coastal flux gradient forms. Embedded within this gradient, and the imprint of strong summertime topographic forcing, are small-scale fluctuations that vary in concert with local changes in sea surface temperature. Potential feedbacks between the low-level wind, sea surface temperature, and the wind stress curl are explored in the coastal regime and offshore waters. In all seasons, offshore extensions of colder coastal waters impose a marked influence on low-level conditions by locally enhancing stability and reducing the wind speed, while buoy measurements along the coast indicate that sea surface temperatures and wind speeds tend to be negatively correlated.

scholarly journals Forward and Reverse Shear Environments during Polar Low Genesis over the Northeast Atlantic

2016 ◽  
Vol 144 (4) ◽  
pp. 1341-1354 ◽  
Author(s):  
Annick Terpstra ◽  
Clio Michel ◽  
Thomas Spengler
Keyword(s):  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Sea Surface ◽  
Synoptic Scale ◽  
Low Level ◽  
Wind Speed Maximum ◽  
Polar Low ◽  
Baroclinic Zone

Abstract The synoptic and subsynoptic environments associated with polar low genesis are examined. Ambient pre–polar low environments are classified as forward or reverse shear conditions based on the angle between the thermal and mean wind. Forward shear environments are associated with a synoptic-scale ridge over Scandinavia, featuring a zonally oriented baroclinic zone extending throughout the troposphere with a wind speed maximum at the tropopause. Similar to typical midlatitude cyclogenesis, concurrent wavelike development occurs both in the lower and upper troposphere along the baroclinic zone and the mean propagation direction is eastward, parallel to isolines of sea surface temperature. Reverse shear environments exhibit a distinctly different structure and are characterized by a trough over Scandinavia, associated with a synoptic-scale, occluded cyclone. The genesis area exhibits strong cold air advection on its right-hand side and polar low development occurs on the warm side of an intense low-level jet. The environment resembles the characteristics conducive to secondary development associated with frontal instability. Polar lows developing in this configuration propagate mainly southward, perpendicular to isolines of sea surface temperature. The two genesis environments exhibit similar temperature differences between the sea surface and atmosphere near the surface, yet the magnitude of the surface fluxes is approximately double during reverse shear conditions due to stronger low-level winds. The ratio between surface sensible and latent heat fluxes is close to unity for both shear environments.

scholarly journals On the Influence of Sea Surface Temperature distributions on the Development of Extratropical Cyclones

2021 ◽  
Author(s):  
Hai BUI ◽  
Thomas Spengler
Keyword(s):  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Latent Heat ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Sea Surface ◽  
Minor Role ◽  
Extratropical Cyclones ◽  
The Absolute ◽  
Sst Gradient

AbstractThe sea surface temperature (SST) distribution can modulate the development of extratropical cyclones through sensible and latent heat fluxes. However, the direct and indirect effects of these surface fluxes, and thus the SST, are still not well understood. This study tackles this problem using idealized channel simulations of moist baroclinic development under the influence of surface fluxes. The model is initialized with a zonal wind field resembling the midlatitude jet and a different SST distribution for each experiment, where the absolute SST, the SST gradient, and the meridional position of the SST front are varied.The surface latent heat flux associated with the absolute SST plays a key role in enhancing the moist baroclinic development, while the sensible heat fluxes associated with the SST gradient play a minor role that can be detrimental for the development of the cyclone. The additional moisture provided by the latent heat fluxes originates from about 1000 km ahead of the cyclone a day prior to the time of the most rapid deepening. When the SST in this region is higher than 16°C, the additional latent heat is conducive for explosive cyclone development. For SSTs above 20°C, the cyclones feature characteristics of hybrid cyclones with latent heat release close to their core, maintaining their intensity for a longer period due to continuous and extensive moisture supply from the surface. A high absolute SST with a weak SST gradient, however, can lead to a delay of the deepening stage, because of unorganized convection at early stages reducing environmental baroclinicity.

scholarly journals Interannual Variability of Sea Surface Temperature off Java and Sumatra in a Global GCM*

2008 ◽  
Vol 21 (11) ◽  
pp. 2451-2465 ◽  
Author(s):  
Yan Du ◽  
Tangdong Qu ◽  
Gary Meyers
Keyword(s):  
Indian Ocean ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Mixed Layer ◽  
Heat Budget ◽  
Sea Surface ◽  
Surface Mixed Layer ◽  
Horizontal Advection ◽  
Cold Anomaly ◽  
Sst Anomalies

Abstract Using results from the Simple Ocean Data Assimilation (SODA), this study assesses the mixed layer heat budget to identify the mechanisms that control the interannual variation of sea surface temperature (SST) off Java and Sumatra. The analysis indicates that during the positive Indian Ocean Dipole (IOD) years, cold SST anomalies are phase locked with the season cycle. They may exceed −3°C near the coast of Sumatra and extend as far westward as 80°E along the equator. The depth of the thermocline has a prominent influence on the generation and maintenance of SST anomalies. In the normal years, cooling by upwelling–entrainment is largely counterbalanced by warming due to horizontal advection. In the cooling episode of IOD events, coastal upwelling–entrainment is enhanced, and as a result of mixed layer shoaling, the barrier layer no longer exists, so that the effect of upwelling–entrainment can easily reach the surface mixed layer. Horizontal advection spreads the cold anomaly to the interior tropical Indian Ocean. Near the coast of Java, the northern branch of an anomalous anticyclonic circulation spreads the cold anomaly to the west near the equator. Both the anomalous advection and the enhanced, wind-driven upwelling generate the cold SST anomaly of the positive IOD. At the end of the cooling episode, the enhanced surface thermal forcing overbalances the cooling effect by upwelling/entrainment, and leads to a warming in SST off Java and Sumatra.

scholarly journals A numerical study of the windstorm Klaus: sensitivity to sea surface temperature

2014 ◽  
Vol 57 (5) ◽  
Author(s):  
Nazario Tartaglione ◽  
Rodrigo Caballero
Keyword(s):  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Numerical Study ◽  
Heat Fluxes ◽  
Sea Surface ◽  
Moisture Convergence ◽  
Convective Precipitation ◽  
Limited Area ◽  
Weather Forecasts

<p>This article investigates the role of sea surface temperature (SST) as well as the effects of evaporation and moisture convergence on the evolution of cyclone Klaus, which occurred on January 23 and 24, 2009. To elucidate the role of sea surface temperature (SST) and air–sea fluxes in the dynamics of the cyclone, ten hydrostatic mesoscale simulations were performed by Bologna Limited Area Model (BOLAM). The first one was a control experiment with European Centre for Medium-Range Weather Forecasts (ECMWF) SST analysis. The nine following simulations are sensitivity experiments where the SST are obtained by adding a constant value by 1 to 9 K to the ECMWF field. Results show that a warmer sea increases the surface latent heat fluxes and the moisture convergence, favoring the development of convection in the storm. Convection is affected immediately by the increased SST. Later on, drop of mean sea level pressure (MSLP) occurs together with increasing of surface winds. The cyclone trajectory is not sensitive to change in SST differently from MSLP and convective precipitation.</p>

scholarly journals The Role of Sea Surface Temperature Forcing in the Life-Cycle of Mediterranean Cyclones

2020 ◽  
Vol 12 (5) ◽  
pp. 825 ◽  
Author(s):  
Christos Stathopoulos ◽  
Platon Patlakas ◽  
Christos Tsalis ◽  
George Kallos
Keyword(s):  
Life Cycle ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Early Warning Systems ◽  
Life Cycles ◽  
Heat Fluxes ◽  
Sea Surface ◽  
Mediterranean Cyclones ◽  
The Mediterranean ◽  
The Impact

Air–sea interface processes are highly associated with the evolution and intensity of marine-developed storms. Specifically, in the Mediterranean Sea, the air–ocean temperature deviations have a profound role during the several stages of Mediterranean cyclonic events. Subsequently, this enhances the need for better knowledge and representation of the sea surface temperature (SST). In this work, an analysis of the impact and uncertainty of the SST from different well-known datasets on the life-cycle of Mediterranean cyclones is attempted. Daily SST from the Real Time Global SST (RTG_SST) and hourly SST fields from the Operational SST and Sea Ice Ocean Analysis (OSTIA) and the NEMO ocean circulation model are implemented in the RAMS/ICLAMS-WAM coupled modeling system. For the needs of the study, the Mediterranean cyclones Trixi, Numa, and Zorbas were selected. Numerical experiments covered all stages of their life-cycles (five to seven days). Model results have been analyzed in terms of storm tracks and intensities, cyclonic structural characteristics, and derived heat fluxes. Remote sensing data from the Integrated Multi-satellitE Retrievals (IMERG) for Global Precipitation Measurements (GPM), Blended Sea Winds, and JASON altimetry missions were employed for a qualitative and quantitative comparison of modeled results in precipitation, maximum surface wind speed, and wave height. Spatiotemporal deviations in the SST forcing rather than significant differences in the maximum/minimum SST values, seem to mainly contribute to the differences between the model results. Considerable deviations emerged in the resulting heat fluxes, while the most important differences were found in precipitation exhibiting spatial and intensity variations reaching 100 mm. The employment of widely used products is shown to result in different outcomes and this point should be taken into consideration in forecasting and early warning systems.

scholarly journals Seasonality of Decadal Sea Surface Temperature Anomalies in the Northwestern Pacific

2006 ◽  
Vol 19 (12) ◽  
pp. 2953-2968 ◽  
Author(s):  
Takashi Mochizuki ◽  
Hideji Kida
Keyword(s):  
Heat Flux ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Mixed Layer ◽  
Surface Heat Flux ◽  
Heat Budget ◽  
Surface Heat ◽  
Sea Surface ◽  
Northwestern Pacific ◽  
Sst Anomaly

Abstract The seasonality of the decadal sea surface temperature (SST) anomalies and the related physical processes in the northwestern Pacific were investigated using a three-dimensional bulk mixed layer model. In the Kuroshio–Oyashio Extension (KOE) region, the strongest decadal SST anomaly was observed during December–February, while that of the central North Pacific occurred during February–April. From an examination of the seasonal heat budget of the ocean mixed layer, it was revealed that the seasonal-scale enhancement of the decadal SST anomaly in the KOE region was controlled by horizontal Ekman temperature transport in early winter and by vertical entrainment in autumn. The temperature transport by the geostrophic current made only a slight contribution to the seasonal variation of the decadal SST anomaly, despite controlling the upper-ocean thermal conditions on decadal time scales through the slow Rossby wave adjustment to the wind stress curl. When averaging over the entire KOE region, the contribution from the net sea surface heat flux was also no longer significantly detected. By examining the horizontal distributions of the local thermal damping rate, however, it was concluded that the wintertime decadal SST anomaly in the eastern KOE region was rather damped by the net sea surface heat flux. It was due to the fact that the anomalous local thermal damping of the SST anomaly resulting from the vertical entrainment in autumn was considerably strong enough to suppress the anomalous local atmospheric thermal forcing that acted to enhance the decadal SST anomaly.

Optimizing COSMO_REA6 reanalysis radiation flux for a high resolution coastal ocean model

2020 ◽  
Author(s):  
Martin Vodopivec ◽  
Matjaž Ličer
Keyword(s):  
High Resolution ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Atmospheric Model ◽  
Short Wave ◽  
Ocean Model ◽  
Sea Surface ◽  
Atmospheric Models ◽  
Fine Grid ◽  
Wave Flux

&lt;p&gt;When modelling coastal areas in high spatial resolution, it is also essential to obtain atmospheric forcing with suitably fine grid. The complex coastline and coastal orography exert strong influence on atmospheric fields, wind in particular, and the east Adriatic coast with numerous islands and coastal mountain ridges is a fine example. We decided to use a high resolution COSMO atmospheric reanalysis for our long term ROMS_AGRIF hindcasts, but in our initial experiments we found out that the atmospheric model significantly underestimates the short wave flux over the Mediterranean Sea, probably due to overestimation of high clouds formation and erroneous sea surface temperature used as a boundary condition. We explore different atmospheric models and different combinations of fluxes - direct, diffuse and clear sky solar radiation and combinations of fluxes from different atmospheric models (eg. ERA5). We compare them with solar irradiance observations at a coastal meteorological station and run year-long simulations to compare model sea surface temperature (SST) with satellite observations obtained from Coprenicus Marine Environment Monitoring Service.&lt;/p&gt;

Sign in / Sign up

Export Citation Format

Share Document