scholarly journals Three-dimensional in situ observations of compressive damage mechanisms in syntactic foam using X-ray microcomputed tomography

2017 ◽  
Vol 52 (17) ◽  
pp. 10186-10197 ◽  
Author(s):  
M. E. Kartal ◽  
L. H. Dugdale ◽  
J. J. Harrigan ◽  
M. A. Siddiq ◽  
D. Pokrajac ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Syntactic Foam ◽  
Microcomputed Tomography ◽  
Damage Mechanisms ◽  
X Ray ◽  
In Situ Observations ◽  
Compressive Damage

scholarly journals Morphology and Mechanical Properties of Fossil Diatom Frustules from Genera of Ellerbeckia and Melosira

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1615
Author(s):  
Qiong Li ◽  
Jürgen Gluch ◽  
Zhongquan Liao ◽  
Juliane Posseckardt ◽  
André Clausner ◽  
...  
Keyword(s):  
Fracture Behavior ◽  
Three Dimensional ◽  
Mechanical Tests ◽  
Fracture Force ◽  
Thickness Change ◽  
X Ray ◽  
Transmission Electron ◽  
Percentage Concentration ◽  
Morphology Characterization

Fossil frustules of Ellerbeckia and Melosira were studied using laboratory-based nano X-ray tomography (nano-XCT), transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDS). Three-dimensional (3D) morphology characterization using nondestructive nano-XCT reveals the continuous connection of fultoportulae, tube processes and protrusions. The study confirms that Ellerbeckia is different from Melosira. Both genera reveal heavily silicified frustules with valve faces linking together and forming cylindrical chains. For this cylindrical architecture of both genera, valve face thickness, mantle wall thickness and copulae thickness change with the cylindrical diameter. Furthermore, EDS reveals that these fossil frustules contain Si and O only, with no other elements in the percentage concentration range. Nanopores with a diameter of approximately 15 nm were detected inside the biosilica of both genera using TEM. In situ micromechanical experiments with uniaxial loading were carried out within the nano-XCT on these fossil frustules to determine the maximal loading force under compression and to describe the fracture behavior. The fracture force of both genera is correlated to the dimension of the fossil frustules. The results from in situ mechanical tests show that the crack initiation starts either at very thin features or at linking structures of the frustules.

In Situ Three-Dimensional Synchrotron X-Ray Nanotomography of the (De)lithiation Processes in Tin Anodes

2014 ◽  
Vol 53 (17) ◽  
pp. 4460-4464 ◽  
Author(s):  
Jiajun Wang ◽  
Yu-chen Karen Chen-Wiegart ◽  
Jun Wang
Keyword(s):  
Three Dimensional ◽  
X Ray

In situ imaging of three dimensional freeze printing process using rapid x-ray synchrotron radiography

2022 ◽  
Vol 93 (1) ◽  
pp. 013703
Author(s):  
Guang Yang ◽  
Halil Tetik ◽  
Johanna Nelson Weker ◽  
Xianghui Xiao ◽  
Shuting Lei ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Printing Process ◽  
X Ray ◽  
Synchrotron Radiography ◽  
In Situ Imaging

scholarly journals In Situ Coherent X-ray Diffraction during Three-Point Bending of a Au Nanowire: Visualization and Quantification

2018 ◽  
Vol 2 (4) ◽  
pp. 24 ◽  
Author(s):  
Anton Davydok ◽  
Thomas Cornelius ◽  
Zhe Ren ◽  
Cedric Leclere ◽  
Gilbert Chahine ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Reciprocal Space ◽  
X Ray Diffraction ◽  
Complex Deformation ◽  
X Ray ◽  
Three Point Bending ◽  
Atomic Force ◽  
Au Nanowire ◽  
Before And After

The three-point bending behavior of a single Au nanowire deformed by an atomic force microscope was monitored by coherent X-ray diffraction using a sub-micrometer sized hard X-ray beam. Three-dimensional reciprocal-space maps were recorded before and after deformation by standard rocking curves and were measured by scanning the energy of the incident X-ray beam during deformation at different loading stages. The mechanical behavior of the nanowire was visualized in reciprocal space and a complex deformation mechanism is described. In addition to the expected bending of the nanowire, torsion was detected. Bending and torsion angles were quantified from the high-resolution diffraction data.

Three dimensional V2O5/NaV6O15 hierarchical heterostructures: Controlled synthesis and synergistic effect investigated by in situ X-ray diffraction

Nano Energy ◽  
2016 ◽  
Vol 27 ◽  
pp. 147-156 ◽  
Author(s):  
Chaojiang Niu ◽  
Xiong Liu ◽  
Jiashen Meng ◽  
Lin Xu ◽  
Mengyu Yan ◽  
...  
Keyword(s):  
Synergistic Effect ◽  
Three Dimensional ◽  
Controlled Synthesis ◽  
X Ray Diffraction ◽  
X Ray

scholarly journals X-Ray Single Crystal Structural Analysis of Magnetically Oriented Microcrystals

2014 ◽  
Vol 70 (a1) ◽  
pp. C1138-C1138
Author(s):  
Chiaki Tsuboi ◽  
Kazuki Aburaya ◽  
Shingo Higuchi ◽  
Fumiko Kimura ◽  
Masataka Maeyama ◽  
...  
Keyword(s):  
Molecular Structure ◽  
Crystal Structure ◽  
Single Crystal ◽  
Three Dimensional ◽  
Diffraction Measurement ◽  
X Ray Diffraction ◽  
Data Set ◽  
Uv Curable ◽  
X Ray

We have developed magnetically oriented microcrystal array (MOMA) technique that enables single crystal X-ray diffraction analyses from microcrystalline powder. In this method, microcrystals suspended in a UV-curable monomer matrix are there-dimensionally aligned by special rotating magnetic field, followed by consolidation of the matrix by photopolymerization. From thus achieved MOMAs, we have been succeeded in crystal structure analysis for some substances [1, 2]. Though MOMA method is an effective technique, it has some problems as follows: in a MOMA, the alignment is deteriorated during the consolidation process. In addition, the sample microcrystals cannot be recovered from a MOMA. To overcome these problems, we performed an in-situ X-ray diffraction measurement using a three-dimensional magnetically oriented microcrystal suspension (3D MOMS) of L-alanine. An experimental setting of the in-situ X-ray measurement of MOMS is schematically shown in the figure. L-alanine microcrystal suspension was poured into a glass capillary and placed on the rotating unit equipped with a pair of neodymium magnets. Rotating X-ray chopper with 10°-slits was placed between the collimator and the suspension. By using this chopper, it was possible to expose the X-ray only when the rotating MOMS makes a specific direction with respect to the impinging X-ray. This has the same effect as the omega oscillation in conventional single crystal measurement. A total of 22 XRD images of 10° increments from 0° to 220° were obtained. The data set was processed by using conventional software to obtain three-dimensional molecular structure of L-alanine. The structure is in good agreement with that reported for the single crystal. R1 and wR2 were 6.53 and 17.4 %, respectively. RMSD value between the determined molecular structure and the reported one was 0.0045 Å. From this result, we conclude that this method can be effective and practical to be used widely for crystal structure analyses.

High-Speed X-Ray Imaging of Diesel Injector Needle Motion

2009 ◽  
Author(s):  
A. L. Kastengren ◽  
C. F. Powell ◽  
Z. Liu ◽  
K. Fezzaa ◽  
J. Wang
Keyword(s):  
High Speed ◽  
Three Dimensional ◽  
Linear Increase ◽  
Nozzle Geometry ◽  
X Ray ◽  
Needle Position ◽  
X Ray Imaging ◽  
Linear Oscillation ◽  
Degree Of Convergence

Phase-enhanced x-ray imaging has been used to examine the geometry and dynamics of four diesel injector nozzles. The technique uses a high-speed camera, which allows the dynamics of individual injection events to be observed in real time and compared. Moreover, data has been obtained for the nozzles from two different viewing angles, allowing for the full three-dimensional motions of the needle to be examined. This technique allows the needle motion to be determined in situ at the needle seat and requires no modifications to the injector hardware, unlike conventional techniques. Measurements of the nozzle geometry have allowed the average nozzle diameter, degree of convergence or divergence, and the degree of rounding at the nozzle inlet to be examined. Measurements of the needle lift have shown that the lift behavior of all four nozzles consists of a linear increase in needle lift with respect to time until the needle reaches full lift and a linear decrease as the needle closes. For all four nozzles, the needle position oscillates at full lift with a period of 170–180 μs. The full-lift position of the needle changes as the rail pressure increases, perhaps reflecting compression of the injector components. Significant lateral motions were seen in the two single-hole nozzles, with the needle motion perpendicular to the injector axis resembling a circular motion for one nozzle and linear oscillation for the other nozzle. The two VCO multihole nozzles show much less lateral motion, with no strong oscillations visible.

Observation of non-basal slip in Mg-Y by in situ three-dimensional X-ray diffraction

2018 ◽  
Vol 143 ◽  
pp. 44-48 ◽  
Author(s):  
Zhonghe Huang ◽  
Leyun Wang ◽  
Bijin Zhou ◽  
Torben Fischer ◽  
Sangbong Yi ◽  
...  
Keyword(s):  
Basal Slip ◽  
Three Dimensional ◽  
X Ray Diffraction ◽  
X Ray

scholarly journals Investigating tool engagement in groundwood pulping: finite element modelling and in-situ observations at the microscale

Holzforschung ◽  
2020 ◽  
Vol 74 (5) ◽  
pp. 477-487 ◽  
Author(s):  
Jenny Carlsson ◽  
Magnus Heldin ◽  
Per Isaksson ◽  
Urban Wiklund
Keyword(s):  
Finite Element ◽  
Numerical Models ◽  
X Ray ◽  
Tool Geometries ◽  
Commercial Use ◽  
X Ray Computed ◽  
In Situ Observations ◽  
Underlying Mechanisms

AbstractWith industrial groundwood pulping processes relying on carefully designed grit surfaces being developed for commercial use, it is increasingly important to understand the mechanisms occurring in the contact between wood and tool. We present a methodology to experimentally and numerically analyse the effect of different tool geometries on the groundwood pulping defibration process. Using a combination of high-resolution experimental and numerical methods, including finite element (FE) models, digital volume correlation (DVC) of synchrotron radiation-based X-ray computed tomography (CT) of initial grinding and lab-scale grinding experiments, this paper aims to study such mechanisms. Three different asperity geometries were studied in FE simulations and in grinding of wood from Norway spruce. We found a good correlation between strains obtained from FE models and strains calculated using DVC from stacks of CT images of initial grinding. We also correlate the strains obtained from numerical models to the integrity of the separated fibres in lab-scale grinding experiments. In conclusion, we found that, by modifying the asperity geometries, it is, to some extent, possible to control the underlying mechanisms, enabling development of better tools in terms of efficiency, quality of the fibres and stability of the groundwood pulping process.

Sign in / Sign up

Export Citation Format

Share Document