CeO2 modified graphene nanoplatelets composite powders enhanced the cathodic protection of waterborne zinc-rich epoxy coatings

2020 ◽  
Vol 27 (12) ◽  
Author(s):  
Chunyu Wang ◽  
Zhaohui Qin ◽  
Kang Feng ◽  
Bo Zhong
Nanomaterials ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 1261 ◽  
Author(s):  
C. Cabello-Alvarado ◽  
M. Andrade-Guel ◽  
M. Pérez-Alvarez ◽  
G. Cadenas-Pliego ◽  
Dora A. Cortés-Hernández ◽  
...  

Chronic kidney disease (CKD) is a worldwide public health problem. In stages III and IV of CKD, uremic toxins must be removed from the patient by absorption, through a treatment commonly called hemodialysis. Aiming to improve the absorption of uremic toxins, we have studied its absorption in chemically modified graphene nanoplatelets (GNPs). This study involved the reaction between GNPs and diamines with reaction times of 30, 45 and 60 min using ultrasound waves of different amplitudes and frequencies. Functionalized GNPs were analyzed by Fourier Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), Scanning electron microscopy and energy dispersitive spectroscopy (SEM-EDS), and Thermogravimetric analysis (TGA). The analysis of the functional groups confirmed the presence of amide and hydroxyl groups on the surface of the GNPs by reactions of diamines with carboxylic acids and epoxides. Adsorption of uremic toxins was determined using equilibrium isotherms, where the maximum percentage of removal of uremic toxins was 97%. Dispersion of modified graphene nanoplatelets was evaluated in water, ethanol and hexane, as a result of this treatment was achieved a good and effective dispersion of diamines-modified graphene nanoplatelets in ethanol and hexane. Finally, the results of hemolysis assays of the modified graphene with amine demonstrated that it was not cytotoxic when using 500 mg/mL. The samples of modified graphene demonstrated low degree of hemolysis (<2%), so this material can be used for in vivo applications such as hemodialysis.


2017 ◽  
Vol 6 (1) ◽  
Author(s):  
Yachao Wang ◽  
Jing Shi ◽  
Shiqiang Lu ◽  
Weihan Xiao

Graphene possesses many outstanding properties, such as high strength and light weight, making it an ideal reinforcement for metal matrix composite (MMCs). Meanwhile, fabricating MMCs through laser-assisted additive manufacturing (LAAM) has attracted much attention in recent years due to the advantages of low waste, high precision, short production lead time, and high flexibility. In this study, graphene-reinforced aluminum alloy AlSi10 Mg is fabricated using selective laser melting (SLM), a typical LAAM technique. Composite powders are prepared using high-energy ball milling. Room temperature tensile tests are conducted to evaluate the mechanical properties. Scanning electron microscopy observations are conducted to investigate the microstructure and fracture surface of obtain composite. It is found that adding graphene nanoplatelets (GNPs) significantly increases porosity, which offsets the enhancement of tensile performance as a result of GNPs addition. Decoupling effort is then made to separate the potential beneficial effects from GNPs addition and the detrimental effect from porosity increase. For this purpose, the quantitative relationship between porosity and material strength is obtained. Taking into consideration the strength reduction caused by the increased porosity, the strengthening effect of GNPs turns out to be significant, which reaches 60.2 MPa.


2016 ◽  
Vol 17 (7) ◽  
pp. 1062-1068 ◽  
Author(s):  
Mohsen Keramati ◽  
Ismaeil Ghasemi ◽  
Mohammad Karrabi ◽  
Hamed Azizi ◽  
Mohammad Sabzi

Sign in / Sign up

Export Citation Format

Share Document