On the possibility of generation of high-power low-frequency radiation as a result of evolution of explosive instability in the flow–nonisothermal plasma system

2011 ◽  
Vol 54 (3) ◽  
pp. 193-196 ◽  
Author(s):  
S. M. Fainshtein
Author(s):  
А. Zykov ◽  
S. Orlova ◽  
L. Ovsiannykova

The methods of energy efficiency increasing of pre- and post-harvest thermal processing of grain are considered. The effective ways to deliver energy to the grain using heat pipes and microwave field are given. The effect of combined action of microwave and low-frequency radiation on the grain germination is shown. Currently, the intensification of technological processes under the influence of microwave radiation is used in many industrial processes. Microwave equipment is becoming a necessary technological component of large profitable industries. The process of drying is no exception. In recent years, new versions of dryers have been proposed that use combined methods of energy supply, including microwave energy. Microwave dryers for foodstuffs, grains and oilseeds, including those for seed stock, have been created and are beginning to be used, along with drying and disinfection, disinfection of drying products from harmful bacteria, fungi, and mildew. For the implementation of microwave drying of particular importance is the choice of regime parameters of drying, given the fact that the grain is a biologically active object. Microwave drying allows you to provide a powerful flow of energy to the object of drying and to obtain a significant intensification of moisture evaporation. But at the same time there is also an intense heating of the product, which can degrade its quality. The possibility of supplying energy throughout the cross section of the product allows for the evaporation of moisture from the inner layers of the product, which is especially important at the end of drying, when the zone of evaporation of moisture is significantly deeper. Therefore, the highest drying efficiency can be obtained in combined processes that take advantage of various drying methods, such as convective, as well as the use of microwave and low-frequency magnetic fields. The paper presents effective ways to supply energy to the grain using heat pipes and a microwave field. The effect of the combined action of microwave and low-frequency radiation on grain similarity is shown. Ways to improve the energy efficiency of the processes of preseeding and post-harvest heat treatment of grain are considered.


Electronics ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 123
Author(s):  
Jacek Jakubowski ◽  
Marek Kuchta ◽  
Roman Kubacki

This article investigates the issue of measuring high-power microwave (HPM) pulses. The high energy of these pulses poses a significant threat to many electronic systems, including those used to manage critical infrastructure. This work focuses on requirements for a potential portable measurement device and suggests the application of a method for this purpose, involving the use of a D-dot sensor and a rapid A/D converter. The applied converter enables recording the time waveform on the measuring chain output, also in the case of repetition and time duration of HPM signals. The authors also present a quantitative description of signal processing by the analogue section of the measurement chain solution presented herein and suggest algorithms for digital processing of the signals, the objective of which is to minimize low-frequency interference in the process of reconstructing the time waveform of an electric field using numerical integration.


2015 ◽  
Vol 27 ◽  
pp. 359-373 ◽  
Author(s):  
Baharak Sajjadi ◽  
Abdul Aziz Abdul Raman ◽  
Shaliza Ibrahim

Sign in / Sign up

Export Citation Format

Share Document