Calibrating and validating a soil constitutive model through conventional triaxial tests: an in-depth study on CSUH model

2022 ◽  
Author(s):  
Binglong Zhu ◽  
Zuyu Chen
Keyword(s):  
Constitutive Model ◽  
Triaxial Tests ◽  
Depth Study

Thermodynamic-based cross-scale model for structural soil with emphasis on bond dissolution

2021 ◽  
Author(s):  
Wei Zhang ◽  
Jia-qiang Zou ◽  
Kang Bian ◽  
Yang Wu
Keyword(s):  
Constitutive Model ◽  
Bond Strength ◽  
Scale Model ◽  
Triaxial Tests ◽  
Natural Soil ◽  
Engineering Practice ◽  
Compression Tests ◽  
Strength Deterioration ◽  
Decomposed Granite ◽  
Completely Decomposed Granite

The immersion weakening effect of natural soil has always been a difficult problem encountered in geotechnical engineering practice. The bond dissolution is a common cause of soil strength deterioration, which remains not well understood yet. In this study, a thermodynamic-based constitutive model of structural soils based on the α model is first established, considering the bond strength by modifying the yield surface size and gradually reducing the bond strength with the development of plastic strain. Furthermore, by taking the meso-mechanisms of bond dissolution into account, the evolution rule of the free energy during the bond dissolution process is derived based on a homogenization approach, and a thermodynamic-based constitutive model of structural soil with bond dissolution is thereafter developed. By comparing with the results of one-dimensional compression tests and conventional triaxial tests, the model is verified to be capable of reflecting the gradual destructuration process of soil while loading. The comparison with triaxial test results of completely decomposed granite after different immersion durations and parametric studies show that based on the cross-scale energy equivalence, the model can well reflect the strength deterioration characteristics of completely decomposed granite with bond dissolution mechanisms at the mesoscale fully considered.

Experimental and Numerical Characterization of the Stress-Strain Behavior of Weak Sandstone Formations for Sanding Assessment

2018 ◽  
Author(s):  
Nubia Aurora González Molano ◽  
Jacobo Canal Vila ◽  
Héctor González Pérez ◽  
José Alvarellos Iglesias ◽  
M. R. Lakshmikantha
Keyword(s):  
Constitutive Model ◽  
Equivalent Plastic Strain ◽  
Experimental Tests ◽  
Thick Wall ◽  
Triaxial Tests ◽  
Experimental Program ◽  
Model Parameters ◽  
Sand Production ◽  
Strain Behavior ◽  
Weak Sandstone

In this study an extensive experimental program has been carried out in order to characterize the mechanical behavior of two weak sandstone formations of an offshore field for application to sand production modeling. The experimental tests included Scratch tests, Triaxial tests and Advanced thick wall cylinder tests (ATWC) where the sand production initiation and the cumulative sand produced were registered. Numerical simulations of experimental tests were then performed using an advanced elasto-plastic constitutive model. Triaxial tests simulations allowed calibrating the constitutive model parameters. These parameters were employed for the numerical simulation of the ATWC in order to determine the equivalent plastic strain threshold required to the onset of sand production observed in laboratory for sanding assessment. Results obtained highlight the importance to use a realistic representation of the rock behavior focusing on post-yield behavior in order to build confidence in model predictions.

A Characteristic and a Precisely Constitutive Model for Undrained Clay

2020 ◽  
Vol 975 ◽  
pp. 203-207
Author(s):  
Shih Tsung Hsu ◽  
Wen Chi Hu ◽  
Yu Heng Lin ◽  
Zhuo Ling
Keyword(s):  
Shear Strength ◽  
Plastic Strain ◽  
Constitutive Model ◽  
Strain Hardening ◽  
Undrained Shear Strength ◽  
Triaxial Tests ◽  
Stress Strain ◽  
Proposed Model ◽  
Taipei Basin ◽  
Undrained Shear

Constitutive models for soils are usually adopted in numerical method to analyze the behavior of geotechnical structures. This study performs a series of consolidated-undrained triaxial tests to establish the stress-strain curve of clay. A constitutive model that considers continuous strain hardening-softening is proposed based on the results of triaxial tests. Triaxial test results reveal that undrained shear strength linearly increases with an increase in consolidated pressure , the normalized undrained shear strength is about 0.52 not only for this study but also for the other two cases around Taipei Basin. Due to undrained condition, an associated flow rule between plastic strain increment and stress tensor is adopted. As accumulative plastic strain or/and consolidated pressure change, the mobilized undrained shear strength also changes. All parameters needed for the proposed model can be expressed as a function of undrained shear strength Su, The mobilized undrained shear strength for the proposed model during strain hardening-softening can be in term of accumulative plastic strain. This model can calculate the stress-strain curves of clayed soils accurately.

Modeling of the Cyclic Behavior of Loose Sand by an Elasto-Plastic Fuzzy Set Model

2013 ◽  
Vol 639-640 ◽  
pp. 708-713
Author(s):  
Cheng Chen ◽  
Li Wei Kong ◽  
Quan Qing Wang ◽  
Zhong Liu
Keyword(s):  
Constitutive Model ◽  
Fuzzy Set ◽  
Soil Mechanics ◽  
Cyclic Behavior ◽  
Cyclic Plasticity ◽  
Triaxial Tests ◽  
Loose Sand ◽  
Cyclic Triaxial Tests ◽  
Repeated Load ◽  
Cyclic Plasticity Model

The paper focuses on the development of a cyclic plasticity model based on the fuzzy set theory, which is implemented as a computational tool in order to simplify the computer programming of the constitutive driver. The constitutive model is a rate independent elasto-plastic model which is capable of describing repeated load cycles, dilatancy, material memory, and critical state soil mechanics features. Also, with the aid of membership function, the validity of the constitutive model is enhanced by comparing the theoretical output with a set of experimental data obtained from a variety of cyclic triaxial tests of loose sand.

scholarly journals Destructuration of saturated natural loess: From experiments to constitutive modeling

2020 ◽  
pp. 105678952093930
Author(s):  
Yukai Fu ◽  
Zhiwei Gao ◽  
Yi Hong ◽  
Tonglu Li ◽  
Akhil Garg
Keyword(s):  
Constitutive Model ◽  
Constitutive Modeling ◽  
Soil Structure ◽  
Triaxial Compression ◽  
Structural Effect ◽  
Triaxial Tests ◽  
Natural Soil ◽  
Special Focus ◽  
Compression Tests ◽  
Natural Loess

It has been well recognized that unsaturated natural loess shows significant volume contraction upon wetting due to its metastable internal structure. But the structural effect on stress–strain relationship of saturated natural (undisturbed) loess is much less explored. Few attempts have been made in proposing a constitutive model for saturated natural loess. This study presents both laboratory tests and constitutive modeling of a saturated natural loess, with special focus on the structural effect and evolution of structure damage during loading. Oedometer and drained triaxial compression tests have been carried out on undisturbed and remolded saturated loess samples. It is found that the natural soil structure has dramatic influence on mechanical behavior of loess, including the compressibility, dilatancy, and shear strength. Destructuration, which is the damage of soil structure with deformation, is observed in both oedometer and triaxial tests. A constitutive model is proposed for saturated loess based on the experimental observations. The model is established within the theoretical framework of subloading and superloading surface concepts. Destructuration of loess is assumed to be affected by both plastic volumetric and shear strain. A new method for determining the initial degree of structure is proposed. The model can reasonably predict the compression and shear behavior of both undisturbed and remolded saturated loess.

Determination of Elastic and Plastic Subgrade Soil Parameters for Asphalt Cracking and Rutting Prediction

1996 ◽  
Vol 1540 (1) ◽  
pp. 97-104 ◽  
Author(s):  
G. Behzadi ◽  
W. O. Yandell
Keyword(s):  
Moisture Content ◽  
Constitutive Model ◽  
Permanent Deformation ◽  
Triaxial Tests ◽  
Deformation Analysis ◽  
Soil Parameters ◽  
Dry Density ◽  
Silty Clay ◽  
Exponential Relationship ◽  
Deviator Stress

A preliminary step in the prediction of rutting and cracking in a number of accelerated loading facility trials in Australia is presented. The results of laboratory repeated load triaxial tests were used to characterize the residual and resilient deformation of a silty clay subgrade material. The analysis of permanent deformation indicated that the well-known model ∈p = INS can be used to estimate the accumulated strain at any number of loading cycles. The parameter S (the slope of the line in a plot of log ∈p –log N) was found to be independent of stress and density, but very small increases were observed as moisture content increased. The parameter I (the intercept in a plot of log ∈p –log N) was found to be most sensitive to deviator stress. The test results also indicated that I increased with increasing moisture content and decreased as dry density increased. The analysis revealed that an exponential relationship existed between I and deviator stress. This relationship was used to develop a constitutive model for silty clay based on the previously mentioned well-known model. The constitutive model obtained would be able to predict the plastic strain under any number of loads at any specified stress level. Resilient deformation analysis has shown that resilient modulus initially decreased rapidly with increasing deviator stress and then increased slightly or was nearly constant. The elastic and plastic parameters will be used as input for performance predictors such as VESYS and Mechano-Lattice.

Strength and deformation characteristics of shredded rubber tire – sand mixtures

2003 ◽  
Vol 40 (2) ◽  
pp. 254-264 ◽  
Author(s):  
Sompote Youwai ◽  
Dennes T Bergado
Keyword(s):  
Constitutive Model ◽  
Unit Weight ◽  
Triaxial Tests ◽  
Triaxial Testing ◽  
Deformation Characteristics ◽  
Scrap Tires ◽  
Sand Mixture ◽  
Mixing Ratios ◽  
Rubber Tire ◽  
Strength And Deformation

The volume of scrap tires, an undesired urban waste, is increasing every year. One of the possible alternatives for this waste is to use shredded tires alone or mixed with soil as a lightweight backfill. This paper presents the results of triaxial tests on compacted shredded rubber tire – sand mixtures. The tests were carried out with different mixing ratios of shredded rubber tires and sand. With an increasing proportion of sand in the mixture, the density, unit weight, and shear strength of the mixture increased, but the compressibility decreased. The dilatancy characteristics of shredded rubber tires mixed sand were relatively similar to a cohesionless material and can be explained within a critical state framework. A proposed constitutive model broadly captures the strength and deformation characteristics of a shredded rubber tire – sand mixture at different mixing ratios.Key words: shredded rubber tires, triaxial testing, constitutive model.

A Constitutive Model of Sandstone Considering the Post Peak Behavior

2017 ◽  
Vol 35 (1) ◽  
pp. 13-25 ◽  
Author(s):  
F. S. Jeng ◽  
M. C. Weng ◽  
F. H. Yeh ◽  
Y. H. Yang ◽  
T. H. Huang
Keyword(s):  
Constitutive Model ◽  
Nonlinear Elasticity ◽  
Strain Curve ◽  
Shear Loading ◽  
Triaxial Tests ◽  
Flow Rule ◽  
Plastic Behavior ◽  
Softening Behavior ◽  
Proposed Model ◽  
Confining Pressures

AbstractIn rock engineering, evaluating the post-peak strength and deformation of rock is necessary. To explore the elasto-plastic behavior of sandstone in the post-peak stage, a series of strain-controlled triaxial tests were conducted under different confining pressures. According to the post-peak characteristics, a constitutive model based on nonlinear elasticity and generalized plasticity is proposed. This proposed model is characterized by the following features: (1) Nonlinear elasticity is observed under hydrostatic and shear loading; (2) the associated flow rule is followed; (3) substantial plastic deformation occurs during shear loading; and (4) post-peak softening behavior is accurately predicted. This model requires twelve material parameters, three for elasticity and nine for plasticity. The proposed model was validated by comparing the triaxial test results of Mushan sandstone at different hydrostatic pressures under dry and saturated conditions. In addition, the model is versatile; it can simulate the deformational behavior of two other sandstones. In summary, the proposed model can reasonably predict the complete stress–strain curve of sandstone.

Sign in / Sign up

Export Citation Format

Share Document