Tunable hydrodynamic focusing with dual-neodymium magnet-based microfluidic separation device

Author(s):  
Maan Al-Zareer
2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Hyeon Gi Kye ◽  
Byeong Seon Park ◽  
Jong Min Lee ◽  
Min Gyu Song ◽  
Han Gyeol Song ◽  
...  

Author(s):  
Jad Kanbar ◽  
David Clague

A continuous flow symmetric passive separation device was designed using an equivalent circuit to create variable flow rates to drain channels and collection outlets. The inlet reservoir was placed in the axis of symmetry and in line to downstream buffer inlets for hydrodynamic focusing. This inlet reservoir was sufficiently larger than the different inlet connections that were punched into it. By varying the diameter of the inlet connection into the reservoir, the distribution and therefore separation of particles could be influenced to significance. Not only was the ratio of sample inlet diameter to reservoir important, but so was the relative position along the y-axis of the reservoir. We found that a 2:1 ratio and placement at the top and middle of the reservoir yielded the best separation results. Further analysis of the velocity profile in the reservoir was explored using COMSOL Multyphysics®. The observed paths of particle trajectory corroborated with the models. Lastly this device aimed to provide an aspect of separation simple enough to be included in conjunction with other passive separation geometries to further enhance results and throughput.


2013 ◽  
Vol 57 (1) ◽  
pp. 86-95
Author(s):  
Mihai Lungu ◽  
Raluca Giugiulan ◽  
Antoanetta Lungu ◽  
Madalin Bunoiu ◽  
Adrian Neculae

Abstract This paper investigates the possibility to improve the filtering process of flue gas by separation of suspended nanoparticle using dielectrophoresis. The study focuses on the particles having an average radius of about 50-150 nm, that cannot be filtrated by classical techniques but have a harmful effect for environment and human health. The size distribution nanoparticles collected from the flue gas filters of a hazardous waste incinerator plant were evaluated. Based on obtained experimental data and a proposed mathematical model, the concentration distribution of nanoparticle suspended in flue gas inside a microfluidic separation device was analyzed by numerical simulations, using the finite element method. The performances of the device were described in terms of three new specific quantities related to the separation process, namely Recovery, Purity and Separation Efficiency. The simulations could provide the optimal values of control parameters for separation process, and aim to be a useful tool in designing microfluidic devices for separating nanoparticle from combustion gases.


Author(s):  
Muhammad Afzal ◽  
Jinsoo Park ◽  
Ghulam Destgeer ◽  
Husnain Ahmed ◽  
Syed Atif Iqrar ◽  
...  

Abstract Tardigrades are microscopic animals widely known for their ability to survive in extreme conditions. They are the focus of current research in the fields of taxonomy, biogeography, genomics, proteomics, development, space biology, evolution and ecology. Tardigrades, such as Hypsibius exemplaris, are being advocated as a next-generation model organism for genomic and developmental studies. The raw culture of H. exemplaris usually contains tardigrades themselves, their eggs, faeces and algal food. Experimentation with tardigrades often requires the demanding and laborious separation of tardigrades from raw samples to prepare pure and contamination-free tardigrade samples. In this paper, we propose a two-step acoustomicrofluidic separation method to isolate tardigrades from raw samples. In the first step, a passive microfluidic filter composed of an array of traps is used to remove large algal clusters in the raw sample. In the second step, a surface acoustic wave-based active microfluidic separation device is used to deflect tardigrades continuously from their original streamlines inside the microchannel and thus isolate them selectively from algae and eggs. The experimental results demonstrated the efficient separation of tardigrades, with a recovery rate of 96% and an impurity of 4% algae on average in a continuous, contactless, automated, rapid and biocompatible manner.


2009 ◽  
Vol 129 (11) ◽  
pp. 380-386 ◽  
Author(s):  
Taizo Kobayashi ◽  
Daiki Kato ◽  
Hiroyuki Koga ◽  
Kenichi Morimoto ◽  
Makoto Fukuda ◽  
...  

Author(s):  
Mehdi Alidokht ◽  
Samaneh Yazdani ◽  
Esmaeil Hadavandi ◽  
Saeed Chehreh Chelgani

AbstractTri-flo cyclone, as a dense-medium separation device, is one of the most typical environmentally friendly industrial techniques in the coal washery plants. Surprisingly, no detailed investigation has been conducted to explore the effectiveness of tri-flo cyclone operating parameters on their representative metallurgical responses (yield and recovery). To fill this gap, this work for the first time in the coal processing sector is going to introduce a type of advanced intelligent method (boosted-neural network “BNN”) which is able to linearly and nonlinearly assess multivariable correlations among all variables, rank them based on their effectiveness and model their produced responses. These assessments and modeling were considered a new concept called “Conscious Laboratory (CL)”. CL can markedly decrease the number of laboratory experiments, reduce cost, save time, remove scaling up risks, expand maintaining processes, and significantly improve our knowledge about the modeled system. In this study, a robust monitoring database from the Tabas coal plant was prepared to cover various conditions for building a CL for coal tri-flo separators. Well-known machine learning methods, random forest, and support vector regression were developed to validate BNN outcomes. The comparisons indicated the accuracy and strength of BNN over the examined traditional modeling methods. In a sentence, generating a novel BNN within the CL concept can apply in various energy and coal processing areas, fill gaps in our knowledge about possible interactions, and open a new window for plants' fully automotive process.


2021 ◽  
Vol 25 (3) ◽  
Author(s):  
Xiaofei Yuan ◽  
Andrew Glidle ◽  
Hitoshi Furusho ◽  
Huabing Yin

AbstractOptical-based microfluidic cell sorting has become increasingly attractive for applications in life and environmental sciences due to its ability of sophisticated cell handling in flow. The majority of these microfluidic cell sorting devices employ two-dimensional fluid flow control strategies, which lack the ability to manipulate the position of cells arbitrarily for precise optical detection, therefore resulting in reduced sorting accuracy and purity. Although three-dimensional (3D) hydrodynamic devices have better flow-focusing characteristics, most lack the flexibility to arbitrarily position the sample flow in each direction. Thus, there have been very few studies using 3D hydrodynamic flow focusing for sorting. Herein, we designed a 3D hydrodynamic focusing sorting platform based on independent sheath flow-focusing and pressure-actuated switching. This design offers many advantages in terms of reliable acquisition of weak Raman signals due to the ability to precisely control the speed and position of samples in 3D. With a proof-of-concept demonstration, we show this 3D hydrodynamic focusing-based sorting device has the potential to reach a high degree of accuracy for Raman activated sorting.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Haoran Wang ◽  
Anton Enders ◽  
John-Alexander Preuss ◽  
Janina Bahnemann ◽  
Alexander Heisterkamp ◽  
...  

Abstract3D printing of microfluidic lab-on-a-chip devices enables rapid prototyping of robust and complex structures. In this work, we designed and fabricated a 3D printed lab-on-a-chip device for fiber-based dual beam optical manipulation. The final 3D printed chip offers three key features, such as (1) an optimized fiber channel design for precise alignment of optical fibers, (2) an optically clear window to visualize the trapping region, and (3) a sample channel which facilitates hydrodynamic focusing of samples. A square zig–zag structure incorporated in the sample channel increases the number of particles at the trapping site and focuses the cells and particles during experiments when operating the chip at low Reynolds number. To evaluate the performance of the device for optical manipulation, we implemented on-chip, fiber-based optical trapping of different-sized microscopic particles and performed trap stiffness measurements. In addition, optical stretching of MCF-7 cells was successfully accomplished for the purpose of studying the effects of a cytochalasin metabolite, pyrichalasin H, on cell elasticity. We observed distinct changes in the deformability of single cells treated with pyrichalasin H compared to untreated cells. These results demonstrate that 3D printed microfluidic lab-on-a-chip devices offer a cost-effective and customizable platform for applications in optical manipulation.


2021 ◽  
Vol 25 (8) ◽  
Author(s):  
Yanwei Wang ◽  
Michael Seidel

AbstractFabrication of 3D microfluidic devices is normally quite expensive and tedious. A strategy was established to rapidly and effectively produce multilayer 3D microfluidic chips which are made of two layers of poly(methyl methacrylate) (PMMA) sheets and three layers of double-sided pressure sensitive adhesive (PSA) tapes. The channel structures were cut in each layer by cutting plotter before assembly. The structured channels were covered by a PMMA sheet on top and a PMMA carrier which contained threads to connect with tubing. A large variety of PMMA slides and PSA tapes can easily be designed and cut with the help of a cutting plotter. The microfluidic chip was manually assembled by a simple lamination process.The complete fabrication process from device design concept to working device can be completed in minutes without the need of expensive equipment such as laser, thermal lamination, and cleanroom. This rapid frabrication method was applied for design of a 3D hydrodynamic focusing device for synthesis of gold nanoparticles (AuNPs) as proof-of-concept. The fouling of AuNPs was prevented by means of a sheath flow. Different parameters such as flow rate and concentration of reagents were controlled to achieve AuNPs of various sizes. The sheet-based fabrication method offers a possibility to create complex microfluidic devices in a rapid, cheap and easy way.


2021 ◽  
Vol 2 (3) ◽  
pp. 125-130
Author(s):  
Chelsey A. Leisinger ◽  
Glen Adaniya ◽  
Melanie R. Freeman ◽  
Erica J. Behnke ◽  
Martha Aguirre ◽  
...  

A prospective, multicenter, randomized, sibling oocyte study was conducted with 86 couples to evaluate if a microfluidic sperm separation device improved ICSI sperm selection and subsequent cycle outcomes of fertilization, blastocyst utilization, ploidy, and clinical pregnancy rate when applied to a general patient population. Patients with at least 10 metaphase II oocytes were enrolled in the study and sibling oocyte groups were split in half. One half of the oocytes underwent ICSI with the control processed sperm and the other half were injected with sperm sorted by the ZyMōt microfluidic sperm separation device. Fertilization rate was recorded and resulting blastocysts were biopsied and evaluated for ploidy status with NGS. Euploid, non-mosaic embryos were randomly selected for single embryo transfer. A total of 787 oocytes were evaluated in the ZyMōt group and 777 in the control group. No statistical differences were observed between ZyMōt and control processing methods in any of the study outcomes evaluated. It is possible that the selection of normal, progressive sperm for ICSI, and the repair capacity of oocytes are sufficient to promote normal embryonic development in the general infertility population.


Sign in / Sign up

Export Citation Format

Share Document