Enhancing Wear Resistance of 100Cr6 Bearing Steels by New Heat Treatment Method

2022 ◽  
Author(s):  
Ersoy Erişir ◽  
Özge Ararat ◽  
Oğuz Gürkan Bilir
Keyword(s):  
Heat Treatment ◽  
Wear Resistance ◽  
Treatment Method ◽  
Bearing Steels ◽  
Heat Treatment Method

A Study on Tribology Characteristics of SM53C by High Frequency Heat Treatment

2008 ◽  
Vol 575-578 ◽  
pp. 1170-1176
Author(s):  
Tae Hoon Song ◽  
Kwang Young Lee ◽  
Sun Chul Huh ◽  
Won Jo Park
Keyword(s):  
Heat Treatment ◽  
Wear Resistance ◽  
Combustion Chamber ◽  
High Frequency ◽  
Wear Test ◽  
High Hardness ◽  
Treatment Method ◽  
Valve Lift ◽  
Fuel Gas ◽  
Heat Treatment Method

The Cam nose part of the Automobile's Cam shaft is strongly bumped with rocker arm or valve-lift. Therefore abnormal wear such as unfair-wear and early-wear occur in the surface. This abnormal wear causes a defect that bad timing open and close actions of the engine valve happen in the combustion chamber so the fuel gas will be combustion imperfect. Therefore, the Cam shaft has to be high hardness and wear resistance. In this study, high frequency heat treatment method was accomplished for wear test for material SM53C.

Modified-edge-support heat treatment method of polyimide for crystalline, large-area, and self-standing ultrathin graphite films

Carbon ◽  
2021 ◽  
Author(s):  
Kensuke Murashima ◽  
Yuki Kawashima ◽  
Shuhei Ozaki ◽  
Atsushi Tatami ◽  
Masamitsu Tachibana ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Treatment Method ◽  
Large Area ◽  
Heat Treatment Method

A Study of the Influence of Local Heat Treatment on the Structure of Welded Titanium Pipelines

2021 ◽  
Vol 410 ◽  
pp. 37-41
Author(s):  
Natalia A. Astafeva ◽  
Andrey A. Balanovskiy ◽  
Anna A. Pershina
Keyword(s):  
Heat Treatment ◽  
Residual Stresses ◽  
Titanium Alloys ◽  
Welded Joints ◽  
Treatment Method ◽  
Local Heat ◽  
Optical Metallography ◽  
Heat Treated ◽  
Weld Structure ◽  
Heat Treatment Method

The article analyzes the results of a study of the influence of zonal heat treatment on the structure of welded joints of pipeline elements made of titanium alloys Ti-3.5Al-1.5Mn. In the manufacture of such structures, the TIG welding method is used to join pipe elements, after which the heat treatment method can be used to relieve residual stresses. The experiments have confirmed the effectiveness of zonal heat treatment preceded by welding. It was revealed that for welded joints made of titanium alloys, heat treatment can stabilize the structure. In experiments conducted by the method of optical metallography, the structure of heat treated and untreated welded joints was investigated. The influence of heat treatment on the weld structure and heat-affected zone was identified.

Preparation of aluminum nitride granules by a two-step heat treatment method

2018 ◽  
Vol 29 (4) ◽  
pp. 849-854 ◽  
Author(s):  
Kuan-Ting Lai ◽  
Cheng-Hung Shih ◽  
Chun-Te Wu ◽  
Min-Yu Yang ◽  
Chi-Shiung Hsi
Keyword(s):  
Heat Treatment ◽  
Aluminum Nitride ◽  
Treatment Method ◽  
Step Heat Treatment ◽  
Heat Treatment Method

A supercapacitor with ultrahigh volumetric capacitance produced by self-assembly of reduced graphene oxide through phosphoric acid treatment

2020 ◽  
Vol 8 (36) ◽  
pp. 18933-18944 ◽  
Author(s):  
Zhaoyuan Liu ◽  
Lidong Wang ◽  
Guizhi Ma ◽  
Yinan Yuan ◽  
Henan Jia ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Graphene Oxide ◽  
Phosphoric Acid ◽  
Reduced Graphene Oxide ◽  
Self Assembly ◽  
Acid Treatment ◽  
Treatment Method ◽  
Reduced Graphene ◽  
Volumetric Capacitance ◽  
Heat Treatment Method

Self-assembled reduced graphene oxide was prepared by a phosphoric acid heat-treatment method and exhibited an ultra-high volumetric capacitance.

VO2: from negative electrode material to symmetric electrochemical capacitor

RSC Advances ◽  
2015 ◽  
Vol 5 (118) ◽  
pp. 97239-97247 ◽  
Author(s):  
Xue-Jing Ma ◽  
Wei-Bin Zhang ◽  
Ling-Bin Kong ◽  
Yong-Chun Luo ◽  
Long Kang
Keyword(s):  
Heat Treatment ◽  
Electrode Material ◽  
Negative Electrode ◽  
Electrochemical Capacitor ◽  
Treatment Method ◽  
Heat Treatment Method ◽  
Negative Electrode Material

A novel negative electrode material of 3D irregular ellipsoidal VO2 with excellent pseudocapacitive properties is synthesized via a simple heat treatment method.

Sign in / Sign up

Export Citation Format

Share Document