A Two-Stage Physical-Based Model for Predicting Flow Stress of As-cast TiAl Alloy Under Hot Deformation Conditions

2018 ◽  
Vol 27 (10) ◽  
pp. 5384-5394 ◽  
Author(s):  
Jingyuan Shen ◽  
Zhanglong Zhao ◽  
Zekun Yao ◽  
Yongquan Ning ◽  
Yuhang Xiong ◽  
...  
Keyword(s):  
Flow Stress ◽  
Hot Deformation ◽  
Tial Alloy ◽  
Two Stage

scholarly journals Hot Deformation Behavior and Processing Maps of a New Ti-6Al-2Nb-2Zr-0.4B Titanium Alloy

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2456
Author(s):  
Zhijun Yang ◽  
Weixin Yu ◽  
Shaoting Lang ◽  
Junyi Wei ◽  
Guanglong Wang ◽  
...  
Keyword(s):  
Titanium Alloy ◽  
Flow Stress ◽  
Constitutive Equation ◽  
Deformation Mechanism ◽  
Power Dissipation ◽  
Hot Deformation ◽  
Dissipation Rate ◽  
Dynamic Recovery ◽  
Processing Maps ◽  
Temperature Range

The hot deformation behaviors of a new Ti-6Al-2Nb-2Zr-0.4B titanium alloy in the strain rate range 0.01–10.0 s−1 and temperature range 850–1060 °C were evaluated using hot compressing testing on a Gleeble-3800 simulator at 60% of deformation degree. The flow stress characteristics of the alloy were analyzed according to the true stress–strain curve. The constitutive equation was established to describe the change of deformation temperature and flow stress with strain rate. The thermal deformation activation energy Q was equal to 551.7 kJ/mol. The constitutive equation was ε ˙=e54.41[sinh (0.01σ)]2.35exp(−551.7/RT). On the basis of the dynamic material model and the instability criterion, the processing maps were established at the strain of 0.5. The experimental results revealed that in the (α + β) region deformation, the power dissipation rate reached 53% in the range of 0.01–0.05 s−1 and temperature range of 920–980 °C, and the deformation mechanism was dynamic recovery. In the β region deformation, the power dissipation rate reached 48% in the range of 0.01–0.1 s−1 and temperature range of 1010–1040 °C, and the deformation mechanism involved dynamic recovery and dynamic recrystallization.

Constitutive Modeling for Flow Stress Behavior of Nimonic 80A Superalloy During Hot Deformation Process

2016 ◽  
Vol 35 (3) ◽  
pp. 327-336 ◽  
Author(s):  
Sendong Gu ◽  
Liwen Zhang ◽  
Chi Zhang ◽  
Wenfei Shen
Keyword(s):  
Flow Stress ◽  
Constitutive Model ◽  
Hot Deformation ◽  
Critical Strain ◽  
Volume Fraction ◽  
Constitutive Models ◽  
Avrami Equation ◽  
Peak Strain ◽  
Compression Tests ◽  
Nimonic 80A

AbstractThe hot deformation characteristics of nickel-based alloy Nimonic 80A were investigated by isothermal compression tests conducted in the temperature range of 1,000–1,200°C and the strain rate range of 0.01—5 s–1on a Gleeble-1500 thermomechanical simulator. In order to establish the constitutive models for dynamic recrystallization (DRX) behavior and flow stress of Nimonic 80A, the material constantsα,nand DRX activation energyQin the constitutive models were calculated by the regression analysis of the experimental data. The dependences of initial stress, saturation stress, steady-state stress, dynamic recovery (DRV) parameter, peak strain, critical strain and DRX grain size on deformation parameters were obtained. Then, the Avrami equation including the critical strain for DRX and the peak strain as a function of strain was established to describe the DRX volume fraction. Finally, the constitutive model for flow stress of Nimonic 80A was developed in DRV region and DRX region, respectively. The flow stress values predicted by the constitutive model are in good agreement with the experimental ones, which indicates that the constitutive model can give an accurate estimate for the flow stress of Nimonic 80A under the deformation conditions.

Analysis of Hot Deformation Dynamics of TC18 Titanium Alloy

2013 ◽  
Vol 747-748 ◽  
pp. 878-884 ◽  
Author(s):  
Qing Rui Wang ◽  
Ai Xue Sha ◽  
Xing Wu Li ◽  
Li Jun Huang
Keyword(s):  
Titanium Alloy ◽  
Phase Transformation ◽  
Flow Stress ◽  
Strain Rate ◽  
Hot Deformation ◽  
Deformation Temperature ◽  
Relationship Model ◽  
Deformation Dynamics ◽  
Deformation Mechanics ◽  
Versus Strain

The effect of strain rate and deformation temperature on flow stress of TC18 titanium alloy was studied through heat simulating tests in 760~960 with temperature interval and the strain rate interval in 0.01~10s-1. Relationship model of flow stress versus strain was established and hot deformation mechanics of TC18 titanium alloy was analyzed. The results show that the flow stress reduces obviously as the deformation temperature increases or the strain rate decreases. Dynamic recovery occurs at high strain rate above phase transformation point, while dynamic recrystallization occurs at low strain rate as well as at the temperature below phase transformation point.

scholarly journals Hot Deformation Behavior and Mechanistic Understanding of New TF400 Titanium Alloy

Metals ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 1277 ◽  
Author(s):  
Guoqing Dai ◽  
Yuwen Cui ◽  
Danying Zhou ◽  
Yanhua Guo ◽  
Hui Chang ◽  
...  
Keyword(s):  
Flow Stress ◽  
Strain Rate ◽  
Hot Deformation ◽  
Deformation Behavior ◽  
Strain Rate Range ◽  
Maximum Height ◽  
Compression Behavior ◽  
Plastic Deformation Behavior ◽  
Restoration Mechanism ◽  
Mechanistic Understanding

The isothermal hot compression behavior of new Ti–Fe–B (named as TF400) alloy was investigated in the temperature range of 750–950 °C and strain rate range from 0.01 to 10 s−1 with the maximum height reduction of 60% by using a Gleeble 3800 thermal simulator. By considering the effect of strain via variable material parameters, a modified constitutive model was proposed to accurately predict the flow stress. The predicted results demonstrate that the flow stress decreases with the increase of temperature while it increases as the strain rate increases, in good agreement with the present experimental results. A mechanistic understanding of plastic deformation behavior in the TF400 alloys was developed by inspecting the microstructural characteristics prior to and after deformations. Dynamic recrystallization and dynamic transformation were found to be the dominant restoration mechanism during the hot deformation process.

scholarly journals Hot Deformation Behavior of a New Al–Mn–Sc Alloy

Materials ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 22
Author(s):  
Weiqi Kang ◽  
Yi Yang ◽  
Sheng Cao ◽  
Lei Li ◽  
Shewei Xin ◽  
...  
Keyword(s):  
Flow Stress ◽  
Hot Deformation ◽  
Deformation Behavior ◽  
Material Model ◽  
Strain Rates ◽  
Hot Workability ◽  
Hot Deformation Behavior ◽  
Hollomon Parameter ◽  
Dynamic Material Model ◽  
Optimal Processing

The hot deformation behavior of a new Al–Mn–Sc alloy was investigated by hot compression conducted at temperatures from 330 to 490 °C and strain rates from 0.01 to 10 s−1. The hot deformation behavior and microstructure of the alloy were significantly affected by the deformation temperatures and strain rates. The peak flow stress decreased with increasing deformation temperatures and decreasing strain rates. According to the hot deformation behavior, the constitutive equation was established to describe the steady flow stress, and a hot processing map at 0.4 strain was obtained based on the dynamic material model and the Prasad instability standard, which can be used to evaluate the hot workability of the alloy. The developed hot processing diagram showed that the instability was more likely to occur in the higher Zener–Hollomon parameter region, and the optimal processing range was determined as 420–475 °C and 0.01–0.022 s−1, in which a stable flow and a higher power dissipation were achieved.

Study on High Temperature Flow Stress Model of As-cast SA508-3 Low Alloy Steel

2020 ◽  
Vol 831 ◽  
pp. 25-31
Author(s):  
Pan Fei Fan ◽  
Jian Sheng Liu ◽  
Hong Ping An ◽  
Li Li Liu
Keyword(s):  
High Temperature ◽  
Flow Stress ◽  
Strain Rate ◽  
Alloy Steel ◽  
Flow Behavior ◽  
Peak Stress ◽  
Stress Model ◽  
Low Alloy Steel ◽  
Two Stage ◽  
Flow Stress Model

In order to obtain the high temperature flow behavior of as-cast SA508-3 low alloy steel, the stress-strain curves of steel are obtained by Gleeble thermal simulation compression test at deformation temperature 800°C-1200°C and strain rate 0.001s-1-1s-1. Based on Laasraoui two-stage flow stress model, a high temperature flow stress model is established by multiple linear regression method. The results show that the peak stress characteristics are not obvious at low temperature and high strain rate, which is a typical dynamic recovery characteristic. Meanwhile, the peak stress characteristics are obvious at high temperature and low strain rate, which is a typical dynamic recrystallization characteristic. By means of the comparisons between experiments and calculations, the Laasraoui two-stage flow stress model can truly reflect flow behavior of steel at high temperature, which provides theoretical guidance for the hot deformation of the steel.

Sign in / Sign up

Export Citation Format

Share Document