Experimental evaluation on high temperature rheological properties of various fiber modified asphalt binders

2008 ◽  
Vol 15 (S1) ◽  
pp. 135-139 ◽  
Author(s):  
Zheng Chen ◽  
Shao-peng Wu ◽  
Zu-huang Zhu ◽  
Jie-sheng Liu
Keyword(s):  
High Temperature ◽  
Rheological Properties ◽  
Experimental Evaluation ◽  
Asphalt Binders ◽  
Modified Asphalt

scholarly journals Effect of Recycled Shell Waste as a Modifier on the High- and Low-Temperature Rheological Properties of Asphalt

2021 ◽  
Vol 13 (18) ◽  
pp. 10271
Author(s):  
Yuchen Guo ◽  
Xuancang Wang ◽  
Guanyu Ji ◽  
Yi Zhang ◽  
Hao Su ◽  
...  
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Rheological Properties ◽  
Low Temperatures ◽  
High Speed ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Modified Asphalt ◽  
Temperature Performance

The deteriorating ecological environment and the concept of sustainable development have highlighted the importance of waste reuse. This article investigates the performance changes resulting from the incorporation of shellac into asphalt binders. Seashell powder-modified asphalt was prepared with 5%, 10%, and 15% admixture using the high-speed shear method. The microstructure of the seashell powder was observed by scanning electron microscope test (SEM); the physical-phase analysis of the seashell powder was carried out using an X-ray diffraction (XRD) test; the surface characteristics and pore structure of shellac were analyzed by the specific surface area Brunauer-Emmett-Teller (BET) test; and Fourier infrared spectroscopy (FTIR) qualitatively analyzed the composition and changes of functional groups of seashell powder-modified asphalt. The conventional performance index of seashell powder asphalt was analyzed by penetration, softening point, and ductility (5 °C) tests; the effect of seashell powder on asphalt binder was studied using a dynamic shear rheometer (DSR) and bending beam rheometer (BBR) at high and low temperatures, respectively. The results indicate the following: seashell powder is a coarse, porous, and angular CaCO3 bio-material; seashell powder and the asphalt binder represent a stable physical mixture of modified properties; seashell powder improves the consistency, hardness, and high-temperature performance of the asphalt binder but weakens the low-temperature performance of it; seashell powder enhances the elasticity, recovery performance, and permanent deformation resistance of asphalt binders and improves high-temperature rheological properties; finally, seashell powder has a minimal effect on the crack resistance of asphalt binders at very low temperatures. In summary, the use of waste seashells for recycling as bio-modifiers for asphalt binders is a practical approach.

scholarly journals Rheological Properties of Graphene/Polyethylene Composite Modified Asphalt Binder

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3986
Author(s):  
Huan-Yun Zhou ◽  
Huai-Bing Dou ◽  
Xian-Hua Chen
Keyword(s):  
High Temperature ◽  
Rheological Properties ◽  
High Speed ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Creep Recovery ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Asphalt Modification ◽  
Ft Ir

Aiming to improve the comprehensive road performance of asphalt binders, especially the high-temperature performance, a novel asphalt binder was prepared by compounding high-quality and low-cost polyethylene (PE) with graphene (GNPs) using a high-speed shearing machine. The rheological properties and interaction mechanism of PE/GNPs composite modified asphalt were investigated using temperature sweep (TeS), multiple stress creep recovery (MSCR), linear amplitude sweep (LAS) and Fourier transform infrared spectroscopy (FT-IR) and field emission scanning electron microscopy (FESEM). The experimental results demonstrated that GNPs and PE can synergistically improve the high-temperature performance of asphalt binders and enhance the rutting resistance of pavements; the pre-blended PE/GNPs masterbatch has good medium-temperature fatigue and low-temperature cracking resistance. Meanwhile, PE/GNPs dispersed uniformly in the asphalt matrix, and the microstructure and dispersion of premixed PE/GNPs masterbatch facilitated the asphalt modification. No new absorption peaks appeared in the FT-IR spectra of the composite modified asphalt, indicating that asphalt binders were physically modified with GNPs and PE. These findings may cast light on the feasibility of polyethylene/graphene composite for asphalt modification.

High temperature rheological properties of crumb rubber modified asphalt binders with various modifiers

2016 ◽  
Vol 112 ◽  
pp. 49-58 ◽  
Author(s):  
Ouming Xu ◽  
Feipeng Xiao ◽  
Sen Han ◽  
Serji N. Amirkhanian ◽  
Zhenjun Wang
Keyword(s):  
High Temperature ◽  
Rheological Properties ◽  
Crumb Rubber ◽  
Asphalt Binders ◽  
Modified Asphalt

scholarly journals Carbon Nanomaterials for Enhancing the Thermal, Physical and Rheological Properties of Asphalt Binders

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2585
Author(s):  
Zhelun Li ◽  
Xin Yu ◽  
Yangshi Liang ◽  
Shaopeng Wu
Keyword(s):  
High Temperature ◽  
Rheological Properties ◽  
Carbon Nanomaterials ◽  
Asphalt Binders ◽  
Snow Melting ◽  
Temperature Performance ◽  
Unique Nature ◽  
Application Potential ◽  
Urban Heat ◽  
Two Parameters

Effective thermal conduction modification in asphalt binders is beneficial to reducing pavement surface temperature and relieving the urban heat island (UHI) effect in the utilization of solar harvesting and snow melting pavements. This study investigated the performance of two nanometer-sized modifiers, graphene (Gr) and carbon nanotubes (CNTs), on enhancing the thermal, physical and rheological properties of asphalt binders. Measurements depending on a transient plant source method proved that both Gr and CNTs linearly increased the thermal conductivity and thermal diffusivity of asphalt binders, and while 5% Gr by volume of matrix asphalt contributed to 300% increments, 5% CNTs increased the two parameters of asphalt binders by nearly 72% at 20 °C. Meanwhile, a series of empirical and rheological properties experiments were conducted. The results demonstrated the temperature susceptibility reduction and high-temperature properties promotion of asphalt binders by adding Gr or CNTs. The variation trends in the anti-cracking properties of asphalt binders modified by Gr and CNTs with the modifier content differed at low temperatures, which may be due to the unique nature of Gr. In conclusion, Gr, whose optimal content is 3% by volume of matrix asphalt, provides superior application potential for solar harvesting and snow melting pavements in comparison to CNTs due to its comprehensive contributions to thermal properties, construction feasibility, high-temperature performance and low-temperature performance of asphalt binders.

scholarly journals High-Temperature Performance of Asphalt Mixtures: Preliminary Analysis for the Standard Technical Index Based on Gray Relational Analysis Method

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Jian Xu ◽  
Yan Gong ◽  
Li-Biao Chen ◽  
Tao Ma ◽  
Jun-Cheng Zeng ◽  
...  
Keyword(s):  
Performance Evaluation ◽  
High Temperature ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Asphalt Binders ◽  
Gray Relational Analysis ◽  
Low Grade ◽  
Modified Asphalt ◽  
Relational Analysis ◽  
Temperature Performance

Aiming to evaluate the high-temperature performance of asphalt binders and asphalt mixtures and to investigate the reliability of the standard technical indexes to evaluate the performance of the asphalt, six typically used asphalt types were employed in this study. The standard high-temperature rheological test, the multiple stress creep recovery (MSCR) test, and the zero-shear viscosity (ZSV) test were employed to characterize the high-temperature performance and non-Newtonian fluid properties of the asphalt. Meanwhile, the high-temperature performance of the asphalt mixture was evaluated through the rutting tests based on the mixture design of AC-13. In general, the modified asphalt performed better than the unmodified asphalt according to the high-temperature rheological properties tests. The ranking of the six kinds of asphalt was confirmed to be different in various laboratory tests. The test results of the asphalt binders showed that the Tafpack Super- (TPS-) modified asphalt performed best in the MSCR and ZSV tests, while the low-grade asphalt PEN20 had the best technical indexes in the dynamic shear rheometer (DSR) test. Besides, the relation between the asphalt and the asphalt mixture was analyzed by gray relational analysis (GRA) method. The present rutting indicator G ∗ / sin   δ  and  G ∗ / 1 − sin   δ ⋅   tan   δ − 1 for evaluating the asphalt mixtures’ high-temperature performance might no longer be suitable. The Cross/Williamson model was the most suitable for calculating and fitting the ZSV, which could be used as the key indicator of the high-temperature performance evaluation of the asphalt. This work lays a foundation for the further study of the high-temperature performance evaluation of asphalt binders.

scholarly journals Mechanistic-empirical evaluation of specific polymer-modified asphalt binders effect on the rheological performance

2020 ◽  
Vol 103 (4) ◽  
pp. 003685042095987
Author(s):  
Ghazi G Al-Khateeb ◽  
Waleed Zeiada ◽  
Mohammed Ismail ◽  
Ahmad Shabib ◽  
Adel Tayara
Keyword(s):  
Rheological Properties ◽  
Laboratory Tests ◽  
Complex Modulus ◽  
Heavy Traffic ◽  
Asphalt Binder ◽  
Empirical Evaluation ◽  
Asphalt Binders ◽  
Modified Asphalt ◽  
Pavement Structures ◽  
Polymer Modified Asphalt

Major distresses such as rutting, fatigue, and thermal cracking are facing asphalt pavement structures due to continuous heavy traffic loading and climate change. The modification of asphalt binders (one of the main components of the asphalt paving mix) has the potential to mitigate distresses through using different additives. Polymer modified asphalt (PMA) binders showed a noticeable resistance to pavement distresses as reported in previous studies. The present study aims to evaluate the effect of polymer modification on the rheological properties of asphalt binders through laboratory tests. The polymers included styrene-butadiene-styrene (SBS) and epolene emulsifiable (EE2) types. The 60/70 binder was used as a control for comparison. The Mechanistic-Empirical Pavement Design Guide (MEPDG) was also utilized to simulate the effect of PMA binders on the rheological properties under different climatic conditions and structural capacities. Additionally, the MEPDG was further utilized to compare the effect of asphalt binders on rheological properties using four different binder input levels. Findings of the study showed that laboratory tests experienced varying outcomes regarding the most efficient asphalt binder by means of distresses resistance. However, the MEPDG evaluation showed that the overall ranking of asphalt binders positively impacting the rheological properties was as following: (1) 4.5% EE2 PMA, (2) 4% EE2 PMA, (3) 60/70 binder, (4) 5% SBS PMA, and (5) 4% SBS PMA binders. Furthermore, statistical analysis illustrated that the effect of using different binder input levels on the performance of pavement varied relatively to the evaluated distresses. The analysis showed that using different binder input levels would affect, to a certain extent, the asphalt binder influence on rheological properties only when evaluating rutting and fatigue distresses. Therefore, it is recommended that precise asphalt binder inputs, that is, shear complex modulus (G*) and phase angle (δ) are used when designing pavement structures in regions with hot and mild climate conditions.

Sign in / Sign up

Export Citation Format

Share Document