Electrophoretic Deposition of Nanocomposite Hydroxyapatite/Titania Coating on 2205 Duplex Stainless Steel Substrate

JOM ◽  
2020 ◽  
Author(s):  
Ali Sabea Hammood ◽  
Mahmood Shakir Naser ◽  
Zainab Shakir Radeef
Keyword(s):  
Stainless Steel ◽  
Duplex Stainless Steel ◽  
Electrophoretic Deposition ◽  
Stainless Steel Substrate ◽  
Steel Substrate ◽  
2205 Duplex Stainless Steel ◽  
Titania Coating

scholarly journals Deposition of TiO2 Film on Duplex Stainless Steel Substrate Using the Cathodic Cage Plasma Technique

2016 ◽  
Vol 19 (5) ◽  
pp. 1207-1212 ◽  
Author(s):  
Rômulo Ribeiro Magalhães de Sousa ◽  
Francisco Odolberto de Araújo ◽  
José Alzamir Pereira da Costa ◽  
Akio Nishimoto ◽  
Bartolomeu Cruz Viana ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Duplex Stainless Steel ◽  
Tio2 Film ◽  
Stainless Steel Substrate ◽  
Steel Substrate ◽  
Plasma Technique

Electrophoretic Deposition of Gelatin/Hydroxyapatite Composite Coatings onto a Stainless Steel Substrate

2015 ◽  
Vol 654 ◽  
pp. 195-199 ◽  
Author(s):  
Františka Frajkorová ◽  
Esther Molero ◽  
Begoña Ferrari
Keyword(s):  
Tissue Engineering ◽  
Stainless Steel ◽  
Electrophoretic Deposition ◽  
Stainless Steel Substrate ◽  
Steel Substrate ◽  
Composite Coatings ◽  
Deposition Efficiency ◽  
Dip Coating ◽  
Gelling Temperature ◽  
Thermal Gelation

Biodegradable polymers and bioactive ceramics are being combined in a variety of novel materials for tissue engineering scaffolds. These composite systems, which combine the useful mechanical properties of polymers with the bioactivity of ceramics, seem to be a promising choice for bone tissue engineering. In recent years, the use of biopolymers that gelate on cooling has received a lot of attention with regards to the production of laminates and coatings. In this work, we report the incorporation of hydroxyapatite (HA) into a gelatin coating on stainless steel substrate using colloidal processing technology. A titania (Ti) buffer layer prepared by dip coating was inserted to improve the bonding strength between the HA/gelatin layer and stainless steel substrate. The suspensions, composed of 1 vol% of HA and three different additions of gelatin, were formulated with a focus on rheological properties for codeposition of both phases by electrophoretic deposition (EPD). The composite coatings performed by EPD were investigated in terms of deposition efficiency and kinetics over different deposition times. The EPD process was performed at both ambient temperature and the gelling temperature of the suspension. While at room temperature no electrophoretic growth of the layers was observed, the thermal gelation of gelatin promotes the growth of a homogeneous, well-adherent coating.

scholarly journals Electrophoretic Deposition of Graphene Oxide on Stainless Steel Substrate

Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1779
Author(s):  
Dominika Marcin Behunová ◽  
George Gallios ◽  
Vladimír Girman ◽  
Hristo Kolev ◽  
Mária Kaňuchová ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Stainless Steel ◽  
Graphene Oxide ◽  
Electrophoretic Deposition ◽  
Photoelectron Spectroscopy ◽  
Stainless Steel Substrate ◽  
Steel Substrate ◽  
Environmental Application ◽  
Transmission Electron ◽  
Pre Treatment

We demonstrated the deposition of the architecture of graphene oxide on stainless steel substrate and its potential environmental application. The synthesis and characterization of graphene oxide were described. The controlled formation of graphene oxide coatings in the form of the homogenous structure on stainless steel is demonstrated by scanning electron microscopy (SEM). The structure, morphology and properties of the material were assessed by Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, transmission electron microscopy (TEM) and atomic force microscopy (AFM). The morphology and stability of these structures are shown to be particularly related to the pre-treatment of stainless steel substrate before the electrophoretic deposition. This approach opens up a new route to the facile fabrication of advanced electrode coatings with potential use in environmental applications.

scholarly journals Synthesis, morpho-structural characterization and electrophoretic deposition of aegirine obtained by the hydrothermal method in the Si-Fe-Na-H2O system

2015 ◽  
Vol 13 (1) ◽  
pp. 51-58
Author(s):  
Marjan Randjelovic
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Stainless Steel ◽  
Electrophoretic Deposition ◽  
Stainless Steel Substrate ◽  
Steel Substrate ◽  
Hydrothermal Process ◽  
Efficient Procedure ◽  
Selection Of ◽  
Scanning Electron

Aegirine belongs to a group of minerals known as inosilicates. In this study, a fast and efficient procedure is proposed for the synthesis of aegirine nanoparticles by means of the hydrothermal process, starting from a suspension of simple hydroxide/silicate precursors. Structural properties of the obtained mineral were assessed by the XRD technique. It was found that aegirine was the only crystalline phase present. The expected needle-like morphology, characteristic of inosilicates, was confirmed by scanning electron microscopy (SEM). Through an appropriate selection of solvents and dispersants, an electrophoretic deposition and immobilization of aegirine on stainless steel was achieved. Native layers of aegirine displayed a very smooth morphology, while after calcination, a detachment of the layers from the stainless steel substrate and the appearance of cracks in the coating was observed. This phenomenon could be prevented by the use of appropriate additives.

scholarly journals Evaluation of Surface Roughness of 316L Stainless Steel Substrate on Nanohydroxyapatite by Electrophoretic Deposition

2018 ◽  
Vol 21 (1) ◽  
pp. 28 ◽  
Author(s):  
Mohammed Jasim Kadhim ◽  
Nawal Ezzat Abdulateef ◽  
Makarim Hazim Abdulkareem
Keyword(s):  
Stainless Steel ◽  
Electrophoretic Deposition ◽  
316L Stainless Steel ◽  
Ph Value ◽  
Stainless Steel Substrate ◽  
Steel Substrate ◽  
Nano Particles ◽  
Substrate Roughness ◽  
Force Microscopy ◽  
Emery Paper

The present work was designed on producing nanohydroxyapatite layers using electrophoretic deposition (EPD) on 316L stainless steel substrate.  The EPD coatings were prepared by the deposition of hydroxyapatite (HA)-chitosan nanocomposites on different substrate roughness (polish surface, 220 grit SiC grind, and sand blast surfaces).  Depositions were performed using the suspensions of HA nano particles (3 g/L) in the mixture of alcohol and distilled water (ethanol, 5 vol. %water and containing 0.5 g/L of chitosan dissolved in 1 vol.% acetic acid.  Coatings were achieved on the cathode at constant voltage, time and temperature (90 V, 5 min and 40 °C respectively); the  pH value was performed and fitted at 4.  After deposition, the coated samples were dried at room temperature for 24 h.  The surface topography of coatings was analyzed using atomic force microscopy (AFM).  SEM was used to postulate both the surface and the cross section morphology of the coatings.  The adhesion bonding between the deposited coatings and substrate were measured using tape tester to evaluate the adhesion bonding between the coating and substrate.  The results showed the deposited coatings on sand blasted substrate has less porosity compared with the polish surface and 220 emery paper SiC grinding substrate respectively.  The coating on the sand blasted substrate showed higher nanoroughness (122 nm), better adhesion bonding (removal area 15%) and higher thickness layer (12 µm) than that of the polish substrate and 220 emery paper SiC grinding substrate.

scholarly journals WEAR ASSESSMENT OF STELLITE COATING IN SEVERAL CORROSIVE SOLUTIONS

2017 ◽  
Author(s):  
I. Rodrigues ◽  
C. Figueiredo-Pina
Keyword(s):  
Stainless Steel ◽  
Wear Resistance ◽  
Duplex Stainless Steel ◽  
Stainless Steel Substrate ◽  
Steel Substrate ◽  
Super Duplex Stainless Steel ◽  
Wear Performance ◽  
Test Conditions ◽  
Stellite Coating ◽  
Wear Tests

Stellite™ 6 coatings deposited by HVOF on a Super Duplex Stainless-Steel substrate and wear performance was subsequently assessed. Thus, reciprocating ball-on-plate wear tests were performed in several conditions, for both coating and substrate. Results showed better wear resistance for the coating in all test conditions.

Sign in / Sign up

Export Citation Format

Share Document