scholarly journals Feedstock Crop Production Costs and Biofuel Feedstock Input Costs Associated with the Production of Energy Cane and Sweet Sorghum in the Southeastern USA

2017 ◽  
Vol 10 (3) ◽  
pp. 772-782 ◽  
Author(s):  
Michael E. Salassi ◽  
Alessandro Holzapfel ◽  
Brian M. Hilbun ◽  
Michael A. Deliberto ◽  
Kenneth A. Gravois ◽  
...  
Author(s):  
James Lowenberg-DeBoer ◽  
Kit Franklin ◽  
Karl Behrendt ◽  
Richard Godwin

AbstractBy collecting more data at a higher resolution and by creating the capacity to implement detailed crop management, autonomous crop equipment has the potential to revolutionise precision agriculture (PA), but unless farmers find autonomous equipment profitable it is unlikely to be widely adopted. The objective of this study was to identify the potential economic implications of autonomous crop equipment for arable agriculture using a grain-oilseed farm in the United Kingdom as an example. The study is possible because the Hands Free Hectare (HFH) demonstration project at Harper Adams University has produced grain with autonomous equipment since 2017. That practical experience showed the technical feasibility of autonomous grain production and provides parameters for farm-level linear programming (LP) to estimate farm management opportunities when autonomous equipment is available. The study shows that arable crop production with autonomous equipment is technically and economically feasible, allowing medium size farms to approach minimum per unit production cost levels. The ability to achieve minimum production costs at relatively modest farm size means that the pressure to “get big or get out” will diminish. Costs of production that are internationally competitive will mean reduced need for government subsidies and greater independence for farmers. The ability of autonomous equipment to achieve minimum production costs even on small, irregularly shaped fields will improve environmental performance of crop agriculture by reducing pressure to remove hedges, fell infield trees and enlarge fields.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Leilah Krounbi ◽  
Akio Enders ◽  
John Gaunt ◽  
Margaret Ball ◽  
Johannes Lehmann

AbstractThe conversion of dairy waste with high moisture contents to dry fertilizers may reduce environmental degradation while lowering crop production costs. We converted the solid portion of screw-pressed dairy manure into a sorbent for volatile ammonia (NH3) in the liquid fraction using pyrolysis and pre-treatment with carbon dioxide (CO2). The extractable N in manure biochar exposed to NH3 following CO2 pre-treatment reached 3.36 g N kg−1, 1260-fold greater extractable N than in untreated manure biochar. Ammonia exposure was 142-times more effective in increasing extractable N than immersing manure biochar in the liquid fraction containing dissolved ammonium. Radish and tomato grown in horticultural media with manure biochar treated with CO2 + NH3 promoted up to 35% greater plant growth (dry weight) and 36–83% greater N uptake compared to manure biochar alone. Uptake of N was similar between plants grown with wood biochar exposed to CO2 + NH3, compared to N-equivalent treatments. The available N in dairy waste in New York (NY) state, if pyrolyzed and treated with NH3 + CO2, is equivalent to 11,732–42,232 Mg N year−1, valued at 6–21.5 million USD year−1. Separated dairy manure treated with CO2 + NH3 can offset 23–82% of N fertilizer needs of NY State, while stabilizing both the solid and liquid fraction of manure for reduced environmental pollution.


2021 ◽  
Vol 940 (1) ◽  
pp. 012089
Author(s):  
H Pribadi ◽  
S Jumiyati ◽  
A Muis ◽  
I K Widnyana ◽  
J Mustabi

Abstract The rate of world population growth gets faster every year, while on the other hand the land available for food production activities is increasingly limited. Efforts to increase income and food crop production by using cocoa farming to support national food security can be done by optimizing of land through crop diversification patterns by planting local tubers under cocoa farming. This research aims to analyze the optimization of land use, revenue and production costs. In addition, analyzing the nutritional content contained in each type of local tubers, namely sweet potato, cassava and taro. The research was conducted in the the buffer zone of Lore Lindu National Park (TNLL), Palolo District, Sigi Regency, Central Sulawesi Province, Indonesia. The results showed that the optimization of land use and revenue was obtained through the diversification pattern of sweet potato and cocoa. Optimization of the costs use occurs in the use of fertilizer production inputs. In addition, sweet potatoes have a higher calorific value, protein and fat compared to cassava and taro. However, the carbohydrate content of cassava is higher than that of sweet potato and taro.


2019 ◽  
Vol 10 (7) ◽  
pp. 798 ◽  
Author(s):  
Oksana Nuzhna ◽  
Nataliia Tluchkevych ◽  
Nataliia Semenyshena ◽  
Kateryna Nahirska ◽  
Irina Sadovska

 The current paper is focused on material resources as a controlling factor in crop production. It has been found that according to the analysis of crop production expenditures in agricultural enterprises of Ukraine an expense structure consists of approximately 70% of material costs. In this regard, the ABC-analysis is utilized with the aim to determine the items of material expenses that significantly affect the cost and consequently the process of operational management for making decisions. The findings of the ABC-analysis of material expenditures for crop production in terms of elements at Ukrainian agricultural enterprises made it possible to determine the types of control (systematic, periodic, selective) that should be applied for different cost groups focusing on the most significant items of the material expenses. Expenditures are classified according to the stages of the technological process and types of the technology for crop cultivation, allowing to control the scope of production costs at each stage of crops growing. These stages can be the basis for the application in the system of cost management of Activity Based Costing model. It is proposed to apply the operational control of material costs through the budgeting system in the agrarian management. It plays a leading role in the management system providing the process of managerial decisions making with the operative information about the actual indicators of material costs and their deviations. A form fragment of a flexible budget on material expenditures for winter wheat production has been elaborated. The enterprise managers can make operational, current and strategic management decisions and, consequently, influence the change of material resources, adjusting them to the technological processes stages in production and sales of goods, works and services based on the proposed form of a budget.


Author(s):  
Karin HEINSCHINK Karin HEINSCHINK ◽  
Franz LEMBACHER ◽  
Franz SINABELL ◽  
Christoph TRIBL

Weed Science ◽  
1975 ◽  
Vol 23 (3) ◽  
pp. 253-263 ◽  

The phenoxy herbicides, 2,4-D, 2,4,5-T, MCPA, silvex and related materials, are selective herbicides widely used in crop production and in the management of forests, ranges and industrial, urban and aquatic sites. These chemicals are related to naturally occurring plant growth regulators. They kill plants by causing malfunctions in growth processes. Broad-leaved plants are generally susceptible to the phenoxy herbicides, whereas most grasses, coniferous trees and certain legumes are relatively resistant.The phenoxy herbicides are used to control broad-leaved weeds in wheat, barley, rice, oats, rye, corn, grain sorghums and certain legumes. Such uses increase yields, improve product quality and reduce production costs. The phenoxy herbicides are used in forests to suppress unwanted hardwood trees and brush, to reduce competition with conifers already established or to prepare sites for the regeneration of conifers. They are used on grazing lands to control unpalatable and noxious plants and to kill brush and small trees that reduce the productivity of pastures and ranges. 2,4-D and other phenoxys are used in canals, ponds, lakes and waterways to kill floating weeds such as water hyacinth, submerged weeds such as pond-weeds, and emergent and shoreline plants such as cattails and willows. Industrial and urban uses include control of brush on utility and transportation rights of way, control of dandelions, plantains and other weeds in turf and suppression of ragweed, poison ivy and other plants of public health importance.The principal hazard in the use of the phenoxys is to crops and other valuable plants either within the treated area or nearby. Treated crops and forest trees can be injured through accidental overdosing, improper timing of treatments, unusual weather conditions and other causes. Injury to nearby crops and ornamentals can result from drift of droplets or vapors of the spray. Such losses are largely preventable through the use of proper formulations and spray equipment and the exercise of good judgment.The phenoxy herbicides are predominantly toxic to green plants and are much less toxic to mammals, birds, fish, reptiles, shellfish, insects, worms, fungi and bacteria. When properly used, they do not occur in soils and water at levels harmful to animals and microorganisms. They do not concentrate in food chains and do not persist from year to year in croplands. They are detectable only rarely in food and then only in insignificant amounts.A highly poisonous kind of dioxin called TCDD is an unavoidable contaminant in commercial supplies of 2,4,5-T and silvex. The amount present in currently produced formulations of 2,4,5-T and silvex is not enough to alter the toxicological properties of these preparations or to endanger human health or to affect plants or animals in the environment.The phenoxy herbicides are widely used because they are more efficient and usually less hazardous and less injurious to the environment than alternative methods. Use of these chemicals is estimated to reduce the cost of production of the crops on which they are used by about 5% and to reduce overall agricultural production costs in the United States by about 1%. Uses in forests and nonagricultural situations provide additional savings. If the phenoxys were no longer available, the cost of food, forest products, electric power, transportation and governmental services would be higher. These costs would be borne by consumers.


2019 ◽  
Vol 4 (1) ◽  
pp. 305-321 ◽  
Author(s):  
M. Cunha ◽  
S.G. Gonçalves

AbstractMechanisation is a key input in modern agriculture, while it accounts for a large part of crop production costs, it can bring considerable farm benefits if well managed. Models for simulated machinery costs, may not replace actual cost measurements but the information obtained through them can replace a farm’s existing records, becoming more valuable to decision makers. MACHoice, a decision support system (DSS) presented in this paper, is a farm machinery cost estimator and break-even analyzer of alternatives for agricultural operations, developed using user-driven expectations and in close collaboration with agronomists and computer engineers. It integrates an innovative algorithm developed for projections of machinery costs under different rates of annual machine use and work capacity processing, which is crucial to decisions on break-even machinery alternatives. A case study based on the comparison of multiple alternatives for grape harvesting operations is presented to demonstrate the typical results that can be expected from MACHoice, and to identify its capabilities and limitations. This DSS offers an integrated and flexible analysis environment with a user-friendly graphical interface as well as a high level of automation of processing chains. The DSS-output consists of charts and tables, evidencing the differences related to costs and carbon emissions between the options inserted by the user for the different intensity of yearly work proceeded. MACHoice is an interactive web-based tool that can be accessed freely for non-commercial use by every known browser.


Weed Science ◽  
2015 ◽  
Vol 63 (4) ◽  
pp. 954-961 ◽  
Author(s):  
Martin M. Williams

Edamame, a specialty food-grade soybean popular among health-conscious consumers, is growing in popularity worldwide. Despite a well-developed soybean industry, most edamame consumed in the United States is imported from Asia. Considerable interest exists in growing edamame domestically; however, weed interference is a major problem, and until recently, only a single herbicide was registered for use on the crop. The objectives of this work were (1) to compare effectiveness of weed management treatments that utilize herbicides currently registered for use on edamame or that may be registered in the near future, (2) to determine the significance of edamame cultivar on performance of these treatments, and (3) to identify potential relationships between the crop and weed. Ten different weed management treatments were tested in three edamame cultivars over a 3-yr period. All weed management treatments increased marketable pod yield relative to the nontreated control, but only treatments with saflufenacil orS-metolachlor combinations were comparable to the hand-weeded weed-free treatment. Of the treatments studied,S-metolachlor followed by imazamox was among the greatest yielding, had the least weed density and biomass, and did not reduce crop population density. Also, cultivars differed in their weed-suppressive ability. Path analysis indicated certain relationships were consistent across cultivars, such as weed population density having a direct negative association with crop biomass; however, other edamame–weed interactions were not identical across cultivars. Although more improvements are needed, the vegetable industry is beginning to have nascent weed management options in edamame, which will likely reduce reliance on hand weeding and result in crop-production costs that are more competitive in the global market.


Agriculture ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 16 ◽  
Author(s):  
Milan Panth ◽  
Samuel C. Hassler ◽  
Fulya Baysal-Gurel

The significant problems caused by soilborne pathogens in crop production worldwide include reduced crop performance, decreased yield, and higher production costs. In many parts of the world, methyl bromide was extensively used to control these pathogens before the implementation of the Montreal Protocol—a global agreement to protect the ozone layer. The threats of soilborne disease epidemics in crop production, high cost of chemical fungicides and development of fungicide resistance, climate change, new disease outbreaks and increasing concerns regarding environmental as well as soil health are becoming increasingly evident. These necessitate the use of integrated soilborne disease management strategies for crop production. This article summarizes methods for management of soilborne diseases in crop production which includes the use of sanitation, legal methods, resistant cultivars/varieties and grafting, cropping system, soil solarization, biofumigants, soil amendments, anaerobic soil disinfestation, soil steam sterilization, soil fertility and plant nutrients, soilless culture, chemical control and biological control in a system-based approach. Different methods with their strengths and weaknesses, mode of action and interactions are discussed, concluding with a brief outline of future directions which might lead to the integration of described methods in a system-based approach for more effective management of soilborne diseases.


Sign in / Sign up

Export Citation Format

Share Document