scholarly journals “The behavior of some terpolymers as lubricating oil additives”

2020 ◽  
Vol 10 (3) ◽  
pp. 115-123
Author(s):  
Reham I. El-shazly ◽  
Rasha S. Kamal ◽  
Amal M. Nassar ◽  
Nehal S. Ahmed ◽  
Galal H. Sayed
Keyword(s):  
Thermal Stability ◽  
Viscosity Index ◽  
Polymerization Reaction ◽  
Lubricating Oil ◽  
Gravimetric Analysis ◽  
Oil Additives ◽  
Lubricating Oil Additives ◽  
Acrylate Esters ◽  
Thermal Stability Of ◽  
The Ideal

Abstract In this work, we prepared different alkyl acrylates by esterifying acrylic acid with different alcohols (decanol, dodecanol, hexadecanol and octadecanol). Anilimide was then produced by the reaction of aniline with maleic anhydride. Different teropolymers were prepared by polymerization reaction of anilimide, different alkyl acrylate esters and olefins in different ratios. The thermal stability of the prepared terpolymers was measured by thermal gravimetric analysis which demonstrated a high thermal stability. The polymers were degraded above 500 °C. The rheology behavior shows shear-thinning, it approaches the ideal Newtonian behavior in case of polymer (C). The prepared terpolymers succeeded in raising the viscosity index of oil to 118 in case of polymer (C) and decreasing the pour point of oil to -12 in case of polymer (E).

Tribological and Oxidation Properties Study of a Kind of Sulfonate-Modified Nano Na2CO3 and K2CO3

2011 ◽  
Vol 694 ◽  
pp. 98-102 ◽  
Author(s):  
Zhong Yi He ◽  
Li Ping Xiong ◽  
Jun Xiao Wang ◽  
Jian Wei Qiu ◽  
Xi Sheng Fu
Keyword(s):  
Thermal Stability ◽  
Free Energy ◽  
Tribological Properties ◽  
Antioxidant Properties ◽  
Lubricating Oil ◽  
Base Oil ◽  
Oil Additives ◽  
Oxidation Properties ◽  
Lubricating Oil Additives

The tribological properties of a middle base value metal alkali sulfonate-modified nano Na2CO3 and K2CO3 as lubricating oil additives were introduced in this paper, and its collaboration with the ashless antioxidant properties were evaluation by using PDSC. The results show that the product possesses good tribological properties, thermal stability, and a good synergistic antioxidation effect with ashless antioxidant, it mainly to increase oxidation free energy of base oil.

Tribological Properties of Zirconium Oxide, Spinel and Mullite Nanopowders as Lubricating Oil Additives

2016 ◽  
Vol 721 ◽  
pp. 451-455
Author(s):  
Armands Leitans ◽  
Eriks Palcevskis
Keyword(s):  
Tribological Properties ◽  
Zirconium Oxide ◽  
Friction Pair ◽  
Synthesis Method ◽  
Lubricating Oil ◽  
Nanosized Powders ◽  
Base Oil ◽  
Oil Additives ◽  
Oxide Spinel ◽  
Lubricating Oil Additives

In work investigated effects of zirconium oxide (ZrO2), spinel (MgAl2O4) and mullite (Al6Si2O13) nanosized powders on the base oil tribological properties. The nanosized (30-40nm) powders manufactured by plasma chemical synthesis method. Tribological experiments used on ball-on-disc type tribometer, measured coefficient of friction and determined metalic disc wear. Base oil used selectively purified mineral oil (conform SAE-20 viscosity) without any functional additives. Nanosized powders dispersed in base oil at 0.5; 1.0; 2.0; wt.%. At work cocluded, that the adition nanoparticles in base oil, possible reduced friction pair wear and friction coefficient. As the main results include spinel (MgAl2O4) nanoparticles 0.5 and 1.0 wt. % concentration ability reduced friction coeffiecient value.

scholarly journals The Thermal Properties of Polyurethane/Neoprene Blends on Prosthetic Foot

2020 ◽  
Vol 990 ◽  
pp. 106-110
Author(s):  
Mohd Zulkifli Mohamad Noor ◽  
Mohamad Anas Mohd Azmi ◽  
Mohd Shaiful Zaidi Mad Desa ◽  
Mohd Bijarimi Mat Piah ◽  
Azizan Ramli
Keyword(s):  
Thermal Stability ◽  
Thermal Properties ◽  
Low Cost ◽  
Decomposition Temperature ◽  
Gravimetric Analysis ◽  
Thermal Gravimetric ◽  
Prosthetic Foot ◽  
Reinforced Polymer ◽  
New Material ◽  
Thermal Stability Of

Neoprene reinforced polymer has become an attraction in current research and development of new material blend. In this invention, neoprene was chosen to be enhance to polyurethane because of their superior properties that possess extraordinary mechanical, electrical, optical and thermal properties on prosthetic foot. In this research, polyurethane was chosen due to good rigidity, easy processing and low cost. The reinforcement polyurethane with neoprene is expected to improve the properties of polyurethane. The objective of this research was conducted to investigate the effect of neoprene contents on thermal properties of polyurethane reinforced neoprene on prosthetic foot. The effect of neoprene on thermal properties neoprene reinforced polyurethane was analysed in term of its thermal stability by thermal gravimetric analysis (TGA). Moreover, the visual of small topographic details on the surface of polyurethane/neoprene blends will be examined by scanning electron microscope (SEM). Based on result, the thermal properties show the great enhancement at high neoprene contents which is 1.0wt%. The thermal stability of polyurethane reinforced neoprene improves when the temperature where decomposition starts to occurs are higher than decomposition temperature of pure polyurethane. Then, thermal conductivity of polyurethane shows the great improvement after the addition of neoprene. Lastly, the smooth surface and visible of sheets pattern on surface represent the present of neoprene disperse into polymer that enhance brittleness. Thus, the presence of neoprene has clearly enhanced the thermal stability of the polyurethane. Table 1 shows formulation of neoprene and polyurethane.

Effect of Alkali and Silane Treatment on the Thermal Stability of Hemp Fibers as Reinforcement in Composite Structures

2011 ◽  
Vol 415-417 ◽  
pp. 666-670 ◽  
Author(s):  
Na Lu ◽  
Shubhashini Oza ◽  
Ian Ferguson
Keyword(s):  
Thermal Stability ◽  
Composite Structures ◽  
Natural Fiber ◽  
Alkali Treatment ◽  
Thermo Gravimetric Analysis ◽  
Natural Fibers ◽  
Gravimetric Analysis ◽  
Silane Treatment ◽  
Hemp Fibers ◽  
Thermal Stability Of

Natural fiber reinforced composites are being used as reinforcement material in composite system due to their positive environmental benefits. Added to that, natural fibers offer advantages such as low density, low cost, good toughness, high specific strength, relatively non-abrasive and wide availability. However, the low thermal stability of natural fibers is one of the major challenges to increase their use as reinforcing component. In this study, a thorough investigation has been done to compare the effect of two chemical treatment methods on the thermal stability of hemp fibers. 5wt% sodium hydroxide and 5wt% triethoxyvinylsilane was used for the treatment of hemp fibers. Fourier transform infrared spectroscopy, scanning electron microscopy and thermo gravimetric analysis were used for characterization of untreated and treated fiber. The results indicated that 24 hours alkali treatment and 3 hours silane treatment time enhanced the thermal stability of the hemp fiber. However, alkali treatment shows better improvement compared to silane treatment.

Tribological performance of nanoparticles as lubricating oil additives

2016 ◽  
Vol 18 (8) ◽  
Author(s):  
M. Gulzar ◽  
H. H. Masjuki ◽  
M. A. Kalam ◽  
M. Varman ◽  
N. W. M. Zulkifli ◽  
...  
Keyword(s):  
Tribological Performance ◽  
Lubricating Oil ◽  
Oil Additives ◽  
Lubricating Oil Additives

Palm Kernel Shell Filled Recycled High-Density Polyethylene: Effect of Filler Loading

2016 ◽  
Vol 857 ◽  
pp. 191-195 ◽  
Author(s):  
A. Nadiatul Husna ◽  
Bee Ying Lim ◽  
H. Salmah ◽  
Chun Hong Voon
Keyword(s):  
Thermal Stability ◽  
High Density Polyethylene ◽  
Thermo Gravimetric Analysis ◽  
Palm Kernel ◽  
Filler Loading ◽  
High Density ◽  
Gravimetric Analysis ◽  
Melt Mixing ◽  
Palm Kernel Shell ◽  
Thermal Stability Of

Palm kernel shells (PKS) filled recycled high density polyethylene (rHDPE) biocomposites were produced using melt mixing. The biocomposites were prepared on Brabender Plasticorder at temperature of 185 °C and rotor speed of 50 rpm by varying filler loading (0 to 40 phr). In this study, the effect of PKS loading on rheological properties and thermal stability of rHDPE/PKS were investigated. Rheological study of the biocomposites was carried out by means of capillary rheometer under temperature of 190 °C, 200 °C and 210 °C. Thermal properties of biocomposites were studied by using thermo gravimetric analysis (TGA). The rheological results showed that the flowability of the composite increased with increasing temperature. Meanwhile, the result of TGA showed that at higher PKS loading, rHDPE/PKS biocomposites had lower total weight loss. The thermal stability of the biocomposites was reduced due to the addition of filler loading.

Sign in / Sign up

Export Citation Format

Share Document