scholarly journals The effect of support on RhFe/Al2O3 for ethanol synthesis via CO hydrogenation

2021 ◽  
Author(s):  
Fang Li ◽  
Weixing Qian
Keyword(s):  
Hydrothermal Synthesis ◽  
Co Hydrogenation ◽  
Sol Gel ◽  
Chemical Precipitation ◽  
Fiber Morphology ◽  
Metal Support Interaction ◽  
Nano Fiber ◽  
Crystal Phases ◽  
Effect Of Support ◽  
Ethanol Synthesis

AbstractDifferent alumina samples prepared with sol–gel, chemical precipitation and hydrothermal synthesis were used as supports of Fe-promoted Rh-based catalysts for ethanol synthesis via CO hydrogenation. The samples were characterized by means of N2-adsorpotion, XRD, H2-TPR, XPS, STEM, H2-TPD, DRIFTS, H2 and CO chemisorption. The results indicated that the Al2O3 prepared by hydrothermal synthesis exhibited nano-fiber morphology and constituted of mixed crystal phases, while Al2O3 prepared by sol–gel and chemical precipitation shows no changes of morphology and crystal phases compared with the commercial Al2O3. In addition, nano-fiber Al2O3-supported Rh-based catalyst shows higher ethanol selectivity, which is ascribed to the lower metal–support interaction, higher dispersion and stronger CO insertion ability.

scholarly journals Sol-Gel Synthesis of the Double Perovskite Sr2FeMoO6 by Microwave Technique

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3876
Author(s):  
Jesús Valdés ◽  
Daniel Reséndiz ◽  
Ángeles Cuán ◽  
Rufino Nava ◽  
Bertha Aguilar ◽  
...  
Keyword(s):  
Particle Size ◽  
Hydrothermal Synthesis ◽  
Microwave Radiation ◽  
Structural Characteristics ◽  
Sol Gel ◽  
Synthesis Method ◽  
Double Perovskite ◽  
Synthesis Methods ◽  
X Ray ◽  
Sol Gel Synthesis

The effect of microwave radiation on the hydrothermal synthesis of the double perovskite Sr2FeMoO6 has been studied based on a comparison of the particle size and structural characteristics of products from both methods. A temperature, pressure, and pH condition screening was performed, and the most representative results of these are herein presented and discussed. Radiation of microwaves in the hydrothermal synthesis method led to a decrease in crystallite size, which is an effect from the reaction temperature. The particle size ranged from 378 to 318 nm when pH was 4.5 and pressure was kept under 40 bars. According to X-ray diffraction (XRD) results coupled with the size-strain plot method, the product obtained by both synthesis methods (with and without microwave radiation) have similar crystal purity. The Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDS) techniques showed that the morphology and the distribution of metal ions are uniform. The Curie temperature obtained by thermogravimetric analysis indicates that, in the presence of microwaves, the value was higher with respect to traditional synthesis from 335 K to 342.5 K. Consequently, microwave radiation enhances the diffusion and nucleation process of ionic precursors during the synthesis, which promotes a uniform heating in the reaction mixture leading to a reduction in the particle size, but keeping good crystallinity of the double perovskite. Precursor phases and the final purity of the Sr2FeMoO6 powder can be controlled via hydrothermal microwave heating on the first stages of the Sol-Gel method.

Study of the Bioactive Behavior of Thermally Treated Modified 58S Bioactive Glass

2008 ◽  
Vol 396-398 ◽  
pp. 131-134 ◽  
Author(s):  
Ourania Menti Goudouri ◽  
Xanthippi Chatzistavrou ◽  
Eleana Kontonasaki ◽  
Nikolaos Kantiranis ◽  
Lambrini Papadopoulou ◽  
...  
Keyword(s):  
Thermal Treatment ◽  
Bioactive Glass ◽  
Sol Gel ◽  
Bioactive Glasses ◽  
X Ray ◽  
Characteristic Temperatures ◽  
Calcium Silicates ◽  
Crystal Phases ◽  
Thermally Treated

Thermal treatment of bioactive glasses can affect their microstructure and thus their bioactivity. The aim of this study was the characterization of the thermally treated sol-gel-derived bioactive glass 58S at characteristic temperatures and the dependence of its bioactive behavior on the specific thermal treatment. The thermal behavior of the bioactive glass was studied by thermal analysis (TG/DTA). Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Diffractometry (XRD) were used for the characterization of the bioactive glass. The bioactive behavior in Simulated Body Fluid (SBF) was examined by Scanning Electron Microscopy (SEM-EDS) and FTIR. The major crystal phases after thermal treatment were Calcium Silicates, Wollastonite and Pseudowollastonite, while all thermally treated samples developed apatite after 48 hours in SBF. A slight enhancement of bioactivity was observed for the samples heated at the temperature range 910-970oC.

Tuning the metal–support interaction in supported K-promoted NiMo catalysts for enhanced selectivity and productivity towards higher alcohols in CO hydrogenation

2017 ◽  
Vol 7 (18) ◽  
pp. 4206-4215 ◽  
Author(s):  
Jiaxi Yong ◽  
Xuebin Luan ◽  
Xiaoping Dai ◽  
Xin Zhang ◽  
Hongyan Qiao ◽  
...  
Keyword(s):  
Co Hydrogenation ◽  
Higher Alcohols ◽  
Support Interaction ◽  
Metal Support Interaction ◽  
Metal Support ◽  
Nimo Catalysts ◽  
Enhanced Selectivity

Ni–KMoS/MMO catalysts were obtained using encapsulated Mo-based precursors to tune metal–support interaction, and enhanced selectivity and productivity towards higher alcohols.

scholarly journals The Improvement of Moisture Resistance and Organic Compatibility of SrAl2O4: Eu2+, Dy3+ Persistent Phosphors Coated with Silica–Polymer Hybrid Shell

Materials ◽  
2020 ◽  
Vol 13 (2) ◽  
pp. 426 ◽  
Author(s):  
Lei Lyu ◽  
Yuxian Chen ◽  
Liting Yu ◽  
Rui Li ◽  
Liu Zhang ◽  
...  
Keyword(s):  
Traffic Safety ◽  
Sol Gel ◽  
Chemical Precipitation ◽  
Road Surface ◽  
Moisture Resistance ◽  
Safety Hazards ◽  
Polymer Shell ◽  
Polymer Hybrid ◽  
Surface Marking ◽  
Luminescent Coatings

The existing road surface marking with poor visibility at night results in traffic safety hazards in insufficient lighting roads. This study aims to prepare the dedicated aluminate-based persistent phosphors considering the integrated pavement environment, as the first step to achieve the durable luminescent road surface marking. SrAl2O4: Eu2+, Dy3+ persistent phosphors coated with silica–polymer hybrid shell were prepared by chemical precipitation and sol-gel method to improve moisture resistance and organic compatibility. The optimum silane coupling agent type and dosage, the surfactant dosage, the optimum sodium silicate dosage, and the coating reaction time in silica shell and polymer shell coating were studied based on the moisture resistance test. The silica–polymer hybrid shell coating balances the organic compatibility and thermal stability as compared to the silica or polymer shell coating in the oil absorption test and thermogravimetric analysis. Ex-Em Spectra, XRD, and SEM method were used to characterize the persistent phosphors, indicating the preparation does not destroy the persistent phosphors. The outstanding durable properties of SrAl2O4: Eu2+, Dy3+ persistent phosphors coated with silica–polymer hybrid shell as shown in this research is crucial for its potential application in waterborne luminescent coatings of road surface marking.

Kinetic study of CO hydrogenation on the MgO supported Fe–Co–Mn sol–gel catalyst

2013 ◽  
Vol 19 (4) ◽  
pp. 1144-1152 ◽  
Author(s):  
A.A. Mirzaei ◽  
A. Pourdolat ◽  
M. Arsalanfar ◽  
H. Atashi ◽  
A.R. Samimi
Keyword(s):  
Kinetic Study ◽  
Co Hydrogenation ◽  
Sol Gel

Sintering AlN Ceramics Below 1500°C with MgO-CaO-Al2O3-SiO2 Glass Addition

2007 ◽  
Vol 336-338 ◽  
pp. 1868-1871 ◽  
Author(s):  
Cheng Fu Yang ◽  
Chien Min Cheng ◽  
Ho Hua Chung ◽  
Chao Chin Chan
Keyword(s):  
Sintering Temperature ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Dielectric Characteristics ◽  
Sintering Aid ◽  
Glass Addition ◽  
X Ray ◽  
Crystal Phases ◽  
Diffraction Patterns ◽  
Scanning Electron

5~15 wt% MgO-CaO-Al2O3-SiO2 (MCAS, fabricated by sol-gel method) glass is used as the sintering aid of AlN ceramics. The sintering is proceeded from 1350oC~1550oC, scanning electron microscope is used to observe the sintered morphologies and X-ray diffraction pattern are used to confirm the crystal structures. From the SEM observations, as 10wt% and 15wt% MCAS is added, AlN ceramics can be densified at 1500oC and 1450oC, which are much lower than the before studies were. From the X-ray diffraction patterns, the crystal phases of MCAS-AlN ceramics are AlN, Al2O3, and cordierite phases. In this study, the dielectric characteristics of MCAS-AlN ceramics are also developed as a function of MCAS content and sintering temperature.

scholarly journals Highly Selective Syngas/H2 Production via Partial Oxidation of CH4 Using (Ni, Co and Ni–Co)/ZrO2–Al2O3 Catalysts: Influence of Calcination Temperature

Processes ◽  
2019 ◽  
Vol 7 (3) ◽  
pp. 141 ◽  
Author(s):  
Anis Hamza Fakeeha ◽  
Yasir Arafat ◽  
Ahmed Aidid Ibrahim ◽  
Hamid Shaikh ◽  
Hanan Atia ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Calcination Temperature ◽  
Partial Oxidation ◽  
Sol Gel ◽  
Analytical Techniques ◽  
Oxygen Storage Capacity ◽  
H2 Production ◽  
Oxygen Storage ◽  
Calcination Temperatures ◽  
Metal Support Interaction

In this study, Ni, Co and Ni–Co catalysts supported on binary oxide ZrO2–Al2O3 were synthesized by sol-gel method and characterized by means of various analytical techniques such as XRD, BET, TPR, TPD, TGA, SEM, and TEM. This catalytic system was then tested for syngas respective H2 production via partial oxidation of methane at 700 °C and 800 °C. The influence of calcination temperatures was studied and their impact on catalytic activity and stability was evaluated. It was observed that increasing the calcination temperature from 550 °C to 800 °C and addition of ZrO2 to Al2O3 enhances Ni metal-support interaction. This increases the catalytic activity and sintering resistance. Furthermore, ZrO2 provides higher oxygen storage capacity and stronger Lewis basicity which contributed to coke suppression, eventually leading to a more stable catalyst. It was also observed that, contrary to bimetallic catalysts, monometallic catalysts exhibit higher activity with higher calcination temperature. At the same time, Co and Ni–Co-based catalysts exhibit higher activity than Ni-based catalysts which was not expected. The Co-based catalyst calcined at 800 °C demonstrated excellent stability over 24 h on stream. In general, all catalysts demonstrated high CH4 conversion and exceptionally high selectivity to H2 (~98%) at 700 °C.

Sign in / Sign up

Export Citation Format

Share Document