Three-dimensional Printed Mg-Doped β-TCP Bone Tissue Engineering Scaffolds: Effects of Magnesium Ion Concentration on Osteogenesis and Angiogenesis In Vitro

The limitation of orthopedic fractures and large bone defects treatments has brought the focus on fabricating bone grafts that could enhance ostegenesis and vascularization in-vitro. Developing biomimetic materials such as mineralized nanofibers that can provide three-dimensional templates of the natural bone extracellular-matrix is one of the most promising alternative for bone regeneration. Understanding the interactions between the structure of the scaffolds and cells and therefore the control cellular pathways are critical for developing functional bone grafts. In order to enhance bone regeneration, the engineered scaffold needs to mimic the characteristics of composite bone ECM. This chapter reviews the fabrication of and fabrication techniques for fabricating biomimetic bone tissue engineering scaffolds. In addition, the chapter covers design criteria for developing the scaffolds and examples of enhanced osteogenic differentiation outcomes by fabricating biomimetic scaffolds.

Download Full-text

Mineralized Nanofibers for Bone Tissue Engineering

Advancing Medicine through Nanotechnology and Nanomechanics Applications - Advances in Medical Technologies and Clinical Practice ◽

10.4018/978-1-5225-1043-7.ch009 ◽

2017 ◽

pp. 200-218

Author(s):

Ozan Karaman

Keyword(s):

Tissue Engineering ◽

Bone Tissue Engineering ◽

Bone Regeneration ◽

Bone Tissue ◽

Three Dimensional ◽

Bone Grafts ◽

Tissue Engineering Scaffolds ◽

Promising Alternative ◽

Biomimetic Scaffolds

The limitation of orthopedic fractures and large bone defects treatments has brought the focus on fabricating bone grafts that could enhance ostegenesis and vascularization in-vitro. Developing biomimetic materials such as mineralized nanofibers that can provide three-dimensional templates of the natural bone extracellular-matrix is one of the most promising alternative for bone regeneration. Understanding the interactions between the structure of the scaffolds and cells and therefore the control cellular pathways are critical for developing functional bone grafts. In order to enhance bone regeneration, the engineered scaffold needs to mimic the characteristics of composite bone ECM. This chapter reviews the fabrication of and fabrication techniques for fabricating biomimetic bone tissue engineering scaffolds. In addition, the chapter covers design criteria for developing the scaffolds and examples of enhanced osteogenic differentiation outcomes by fabricating biomimetic scaffolds.

Download Full-text

HYDROXYAPATITE, ALGINATE, AND CHITOSAN FOR BONE SCAFFOLDS: SPECTROSCOPY STUDY

Dentika Dental Journal ◽

10.32734/dentika.v19i2.457 ◽

2016 ◽

Vol 19 (2) ◽

pp. 93-100

Author(s):

Lalita El Milla

Keyword(s):

Tissue Engineering ◽

Bone Tissue Engineering ◽

Bone Tissue ◽

Functional Groups ◽

Bone Growth ◽

Three Dimensional ◽

Dimensional Structure ◽

Tissue Engineering Scaffolds ◽

Hydroxyapatite Powder ◽

Materials Used

Scaffolds is three dimensional structure that serves as a framework for bone growth. Natural materials are often used in synthesis of bone tissue engineering scaffolds with respect to compliance with the content of the human body. Among the materials used to make scafffold was hydroxyapatite, alginate and chitosan. Hydroxyapatite powder obtained by mixing phosphoric acid and calcium hydroxide, alginate powders extracted from brown algae and chitosan powder acetylated from crab. The purpose of this study was to examine the functional groups of hydroxyapatite, alginate and chitosan. The method used in this study was laboratory experimental using Fourier Transform Infrared (FTIR) spectroscopy for hydroxyapatite, alginate and chitosan powders. The results indicated the presence of functional groups PO43-, O-H and CO32- in hydroxyapatite. In alginate there were O-H, C=O, COOH and C-O-C functional groups, whereas in chitosan there were O-H, N-H, C=O, C-N, and C-O-C. It was concluded that the third material containing functional groups as found in humans that correspond to the scaffolds material in bone tissue engineering.

Download Full-text

Three-dimensionally printed polycaprolactone/multicomponent bioactive glass scaffolds for potential application in bone tissue engineering

Biomedical glasses ◽

10.1515/bglass-2020-0006 ◽

2020 ◽

Vol 6 (1) ◽

pp. 57-69

Author(s):

Amirhosein Fathi ◽

Farzad Kermani ◽

Aliasghar Behnamghader ◽

Sara Banijamali ◽

Masoud Mozafari ◽

...

Keyword(s):

Tissue Engineering ◽

3D Printing ◽

Bone Tissue Engineering ◽

Bone Tissue ◽

Three Dimensional ◽

Layer By Layer ◽

Composite Scaffolds ◽

3D Printed ◽

Co Doped

AbstractOver the last years, three-dimensional (3D) printing has been successfully applied to produce suitable substitutes for treating bone defects. In this work, 3D printed composite scaffolds of polycaprolactone (PCL) and strontium (Sr)- and cobalt (Co)-doped multi-component melt-derived bioactive glasses (BGs) were prepared for bone tissue engineering strategies. For this purpose, 30% of as-prepared BG particles (size <38 μm) were incorporated into PCL, and then the obtained composite mix was introduced into a 3D printing machine to fabricate layer-by-layer porous structures with the size of 12 × 12 × 2 mm3.The scaffolds were fully characterized through a series of physico-chemical and biological assays. Adding the BGs to PCL led to an improvement in the compressive strength of the fabricated scaffolds and increased their hydrophilicity. Furthermore, the PCL/BG scaffolds showed apatite-forming ability (i.e., bioactivity behavior) after being immersed in simulated body fluid (SBF). The in vitro cellular examinations revealed the cytocompatibility of the scaffolds and confirmed them as suitable substrates for the adhesion and proliferation of MG-63 osteosarcoma cells. In conclusion, 3D printed composite scaffolds made of PCL and Sr- and Co-doped BGs might be potentially-beneficial bone replacements, and the achieved results motivate further research on these materials.

Download Full-text

Biotemplated Syntheses of Macroporous Materials for Bone Tissue Engineering Scaffolds and Experiments in Vitro and Vivo

ACS Applied Materials & Interfaces ◽

10.1021/am400779e ◽

2013 ◽

Vol 5 (12) ◽

pp. 5557-5562 ◽

Cited By ~ 18

Author(s):

Xing Li ◽

Yayun Zhao ◽

Yue Bing ◽

Yaping Li ◽

Ning Gan ◽

...

Keyword(s):

Tissue Engineering ◽

Bone Tissue Engineering ◽

Bone Tissue ◽

Tissue Engineering Scaffolds ◽

Macroporous Materials

Download Full-text

In vitro evaluation of novel bioactive composites based on Bioglass®‐filled polylactide foams for bone tissue engineering scaffolds

Journal of Biomedical Materials Research Part A ◽

10.1002/jbm.a.20055 ◽

2003 ◽

Vol 67A (4) ◽

pp. 1401-1411 ◽

Cited By ~ 155

Author(s):

J. J. Blaker ◽

J. E. Gough ◽

V. Maquet ◽

I. Notingher ◽

A. R. Boccaccini

Keyword(s):

Tissue Engineering ◽

Bone Tissue Engineering ◽

Bone Tissue ◽

Tissue Engineering Scaffolds ◽

In Vitro Evaluation ◽

Bioactive Composites

Download Full-text

Silicate-doped nano-hydroxyapatite/graphene oxide composite reinforced fibrous scaffolds for bone tissue engineering

Journal of Biomaterials Applications ◽

10.1177/0885328218763665 ◽

2018 ◽

Vol 32 (10) ◽

pp. 1392-1405 ◽

Cited By ~ 15

Author(s):

Ali Deniz Dalgic ◽

Ammar Z. Alshemary ◽

Ayşen Tezcaner ◽

Dilek Keskin ◽

Zafer Evis

Keyword(s):

Tissue Engineering ◽

Graphene Oxide ◽

Bone Tissue Engineering ◽

Protein Adsorption ◽

Bone Tissue ◽

Three Dimensional ◽

Osteosarcoma Cell ◽

In Vitro Biocompatibility ◽

Microscopy Techniques

In this study, novel graphene oxide–incorporated silicate-doped nano-hydroxyapatite composites were prepared and their potential use for bone tissue engineering was investigated by developing an electrospun poly(ε-caprolactone) scaffold. Nanocomposite groups were synthesized to have two different ratios of graphene oxide (2 and 4 wt%) to evaluate the effect of graphene oxide incorporation and groups with different silicate-doped nano-hydroxyapatite content was prepared to investigate optimum concentrations of both silicate-doped nano-hydroxyapatite and graphene oxide. Three-dimensional poly(ε-caprolactone) scaffolds were prepared by wet electrospinning and reinforced with silicate-doped nano-hydroxyapatite/graphene oxide nanocomposite groups to improve bone regeneration potency. Microstructural and chemical characteristics of the scaffolds were investigated by X-ray diffraction, Fourier transform infrared spectroscope and scanning electron microscopy techniques. Protein adsorption and desorption on material surfaces were studied using fetal bovine serum. Presence of graphene oxide in the scaffold, dramatically increased the protein adsorption with decreased desorption. In vitro biocompatibility studies were conducted using human osteosarcoma cell line (Saos-2). Electrospun scaffold group that was prepared with effective concentrations of silicate-doped nano-hydroxyapatite and graphene oxide particles (poly(ε-caprolactone) – 10% silicate-doped nano-hydroxyapatite – 4% graphene oxide) showed improved adhesion, spreading, proliferation and alkaline phosphatase activity compared to other scaffold groups.

Download Full-text

Fabrication and characterization of novel ethyl cellulose-grafted-poly (ɛ-caprolactone)/alginate nanofibrous/macroporous scaffolds incorporated with nano-hydroxyapatite for bone tissue engineering

Journal of Biomaterials Applications ◽

10.1177/0885328218822641 ◽

2019 ◽

Vol 33 (8) ◽

pp. 1128-1144 ◽

Cited By ~ 8

Author(s):

Vahideh Raeisdasteh Hokmabad ◽

Soodabeh Davaran ◽

Marziyeh Aghazadeh ◽

Reza Rahbarghazi ◽

Roya Salehi ◽

...

Keyword(s):

Tissue Engineering ◽

Bone Tissue Engineering ◽

Bone Tissue ◽

Ethyl Cellulose ◽

Three Dimensional ◽

Drying Methods ◽

Layer By Layer ◽

Freeze Dried ◽

Proliferation And Differentiation

The major challenge of tissue regeneration is to develop three dimensional scaffolds with suitable properties which would mimic the natural extracellular matrix to induce the adhesion, proliferation, and differentiation of cells. Several materials have been used for the preparation of the scaffolds for bone regeneration. In this study, novel ethyl cellulose-grafted-poly (ɛ-caprolactone) (EC-g-PCL)/alginate scaffolds with different contents of nano-hydroxyapatite were prepared by combining electrospinning and freeze-drying methods in order to provide nanofibrous/macroporous structures with good mechanical properties. For this aim, EC-g-PCL nanofibers were obtained with electrospinning, embedded layer-by-layer in alginate solutions containing nano-hydroxyapatite particles, and finally, these constructions were freeze-dried. The scaffolds possess highly porous structures with interconnected pore network. The swelling, porosity, and degradation characteristics of the EC-g-PCL/alginate scaffolds were decreased with the increase in nano-hydroxyapatite contents, whereas increases in the in-vitro biomineralization and mechanical strength were observed as the nano-hydroxyapatite content was increased. The cell response to EC-g-PCL/alginate scaffolds with/or without nano-hydroxyapatite was investigated using human dental pulp stem cells (hDPSCs). hDPSCs displayed a high adhesion, proliferation, and differentiation on nano-hydroxyapatite-incorporated EC-g-PCL/alginate scaffolds compared to pristine EC-g-PCL/alginate scaffold. Overall, these results suggested that the EC-g-PCL/alginate-HA scaffolds might have potential applications in bone tissue engineering.

Download Full-text