Evaluation of Effects of Temperature, Relative Humidity, and Wind Speed on Practical Characteristics of Plastic Shrinkage Cracking Distress in Concrete Pavement Using a Digital Monitoring Approach

2021 ◽  
Author(s):  
Hassan Ziari ◽  
Hassan Fazaeli ◽  
Seyed Javad Vaziri Kang Olyaei ◽  
Mohammad Ali Ziari
Keyword(s):  
Wind Speed ◽  
Relative Humidity ◽  
Concrete Pavement ◽  
Shrinkage Cracking ◽  
Plastic Shrinkage ◽  
Digital Monitoring ◽  
Effects Of Temperature

scholarly journals Investigation on the Temperature Distribution of Asphalt Overlay on the Existing Cement Concrete Pavement in Hot-Humid Climate in Southern China

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Zuzhong Li ◽  
Yayun Zhang ◽  
Chunguang Fa ◽  
Xiaoming Zou ◽  
Haiwei Xie ◽  
...  
Keyword(s):  
Wind Speed ◽  
Relative Humidity ◽  
Solar Radiation ◽  
Prediction Model ◽  
Air Temperature ◽  
Concrete Pavement ◽  
Humid Climate ◽  
Temperature Prediction ◽  
Asphalt Overlay ◽  
Hot Humid Climate

Temperature is known to be one of the most important factors affecting the design and performance of asphalt concrete pavement. The distresses of asphalt overlay are closely related to its temperature, particularly in Guangxi, a hot-humid-climate region in China. This research is to analyze the impact of meteorological factors on temperature at 2 cm depth in asphalt overlay by ReliefF algorithm and also obtain the temperature prediction model using MATLAB. Two test sites were installed to monitor the temperatures at different pavement depths from 2014 to 2016; meanwhile, the meteorological data (including air temperature, solar radiation, wind speed, and relative humidity) were collected from the two meteorological stations. It has been found that the temperature at 2 cm depth experiences greater temperature variation, and the maximum and minimum temperatures of asphalt overlay, respectively, occur at 2 cm depth and on the surface. Besides, the results of ReliefF algorithm have also shown that the temperature at 2 cm depth is affected significantly by solar radiation, air temperature, wind speed, and the relative humidity. Based on these analyses, the prediction model of maximum temperature at 2 cm depth is developed using statistical regression. Moreover, the data collected in 2017 are used to validate the accuracy of the model. Compared with the existing models, the developed model was confirmed to be more effective for temperature prediction in hot-humid region. In addition, the analysis of rutting depth and overlay deformation for the two test sections with different materials is done, and the results have shown that reasonable structure and materials of asphalt overlay are vital to promote the high-temperature antideforming capability of pavement.

scholarly journals The effects of temperature, humidity, and barometric pressure on short-sprint race times

2006 ◽  
Vol 84 (4) ◽  
pp. 311-324 ◽  
Author(s):  
J R Mureika
Keyword(s):  
Wind Speed ◽  
Numerical Model ◽  
Relative Humidity ◽  
Aerodynamic Drag ◽  
Barometric Pressure ◽  
Atmospheric Conditions ◽  
Gauge Reading ◽  
World Class ◽  
Effects Of Temperature ◽  
Performance Times

A numerical model of 100 m and 200 m world class sprinting performances is modified using standard hydrodynamic principles to include effects of air temperature, pressure, and humidity levels on aerodynamic drag. The magnitude of the effects are found to be dependent on wind speed. This implies that differing atmospheric conditions can yield slightly different corrections for the same wind-gauge reading. In the absence of wind, temperature is found to induce the largest variation in times (0.01 s per 10°C increment in the 100 m), while relative humidity contributes the least (under 0.01 s for all realistic conditions for 100 m). Barometric pressure variations at a particular venue can also introduce fluctuations in performance times on the order of a 0.01 s for this race. The combination of all three variables is essentially additive, and is more important for head-wind conditions that for tail-winds. As expected, calculated corrections in the 200 m are magnified due to the longer duration of the race. The overall effects of these factors on sprint times can be considered a ``second order'' adjustment to previous methods that rely strictly on a venue's physical elevation, but can become important in extreme conditions.PACS Nos.: 01.80, 02.60L

THE USE OF POLYPROPYLENE FIBERS AGAINST PLASTIC SHRINKAGE CRACKING

2016 ◽  
Vol 3 (1) ◽  
Author(s):  
Hasan Nuri Turkmenoglu ◽  
Hakan Nuri Atahan ◽  
Cengiz Sengul
Keyword(s):  
Relative Humidity ◽  
Wind Velocity ◽  
Fresh Concrete ◽  
Polypropylene Fibers ◽  
Short Fibers ◽  
Shrinkage Cracking ◽  
Plastic Shrinkage ◽  
Concrete Temperature ◽  
Rate Of Evaporation

Plastic shrinkage cracking (PShC) occurs within a few hours after fresh concrete formed into the molds and it takes part on the surface of the concrete. When concrete formed into the molds, the aggregates settle because of the gravity and in contrast, water bleeds. If the rate of evaporation is higher than the rate of bleeding, surface of concrete starts to shrink. However, under the surface, the fresh concrete cannot shrink as much as the surface. Because of this condition, cracking occurs on the surface of concrete. In this respect, the quantity of PShC majorly depends on the temperature of concrete, temperature of air, rate of relative humidity and the wind velocity. Use of short fibers in concrete is one of the most effective ways to prevent concrete from PShC. The aim of this research was to evaluate the effect of polypropylene fibers having different geometries and content on PShC. For this purpose, the principles of ASTM C 1579 standard was considered. Results have shown that the use of polypropylene fibers in limiting PShC is obvious. Moreover, fibrillated fibers has shown better performance than monofilament fibers.

scholarly journals Sporulation of Bremia lactucae Affected by Temperature, Relative Humidity, and Wind in Controlled Conditions

2004 ◽  
Vol 94 (4) ◽  
pp. 396-401 ◽  
Author(s):  
H. Su ◽  
A. H. C. van Bruggen ◽  
K. V. Subbarao ◽  
H. Scherm
Keyword(s):  
Wind Speed ◽  
Relative Humidity ◽  
Downy Mildew ◽  
Exposure Time ◽  
Stomatal Aperture ◽  
Bremia Lactucae ◽  
Wind Speeds ◽  
Controlled Conditions ◽  
Effects Of Temperature

The effects of temperature (5 to 25°C), relative humidity (81 to 100%), wind speed (0 to 1.0 m s-1), and their interactions on sporulation of Bremia lactucae on lettuce cotyledons were investigated in controlled conditions. Sporulation was affected significantly (P < 0.0001) by temperature, with an optimum at 15°C, and by relative humidity (RH), with sporulation increasing markedly at RH ≥ 90%. There was a significant effect of exposure time in relation to temperature (P = 0.0007) but not to RH. In separate experiments, both RH and wind speed significantly (P < 0.0001) affected the number of cotyledons with sporulation and the number of sporangia produced per cotyledon. No sporulation was observed at wind speeds of >0.5 m s-1, regardless of RH. In still air, the number of sporangiophores produced per cotyledon increased linearly with RH from 81 to 100% (P = 0.0001, r = 0.98). Histological observations indicated that sporulation may be affected by stomatal aperture in response to RH, as more closed stomata and correspondingly fewer sporangiophores were present at lower RH. These results are important for understanding the mechanism of RH effects on sporulation and for predicting conditions conducive to downy mildew development.

scholarly journals Potential Evapotranspiration Reduction and Its Influence on Crop Yield in the North China Plain in 1961–2014

2020 ◽  
Vol 2020 ◽  
pp. 1-10 ◽  
Author(s):  
Wanlin Dong ◽  
Chao Li ◽  
Qi Hu ◽  
Feifei Pan ◽  
Jyoti Bhandari ◽  
...  
Keyword(s):  
Wind Speed ◽  
Relative Humidity ◽  
Crop Yield ◽  
North China Plain ◽  
North China ◽  
Potential Evapotranspiration ◽  
The North ◽  
The North China Plain ◽  
Sunshine Hours ◽  
Humidity Index

Climate change has caused uneven changes in hydrological processes (precipitation and evapotranspiration) on a space-temporal scale, which would influence climate types, eventually impact agricultural production. Based on data from 61 meteorological stations from 1961 to 2014 in the North China Plain (NCP), the spatiotemporal characteristics of climate variables, such as humidity index, precipitation, and potential evapotranspiration (ET0), were analyzed. The sensitivity coefficients and contribution rates were applied to ET0. The NCP has experienced a semiarid to humid climate from north to south due to the significant decline of ET0 (−13.8 mm decade−1). In the study region, 71.0% of the sites showed a “pan evaporation paradox” phenomenon. Relative humidity had the most negative influence on ET0, while wind speed, sunshine hours, and air temperature had a positive effect on ET0. Wind speed and sunshine hours contributed the most to the spatiotemporal variation of ET0, followed by relative humidity and air temperature. Overall, the key climate factor impacting ET0 was wind speed decline in the NCP, particularly in Beijing and Tianjin. The crop yield in Shandong and Henan provinces was higher than that in the other regions with a higher humidity index. The lower the humidity index in Hebei province, the lower the crop yield. Therefore, potential water shortages and water conflict should be considered in the future because of spatiotemporal humidity variations in the NCP.

scholarly journals Effect Factors of Benzene Adsorption and Degradation by Nano-TiO2Immobilized on Diatomite

2012 ◽  
Vol 2012 ◽  
pp. 1-6 ◽  
Author(s):  
Lijun Cheng ◽  
Yong Kang ◽  
Guishui Li
Keyword(s):  
Relative Humidity ◽  
Light Intensity ◽  
Experimental Results ◽  
Benzene Adsorption ◽  
Effect Factors ◽  
Benzene Concentration ◽  
Effects Of Temperature ◽  
Safe Concentration

Difference between adsorption of benzene by diatomite and nano-TiO2immobilized on diatomite was investigated. And effects of temperature, light intensity, relative humidity, and initial benzene concentration on adsorption and degradation of benzene by nano-TiO2immobilized on diatomite were also studied. The experimental results showed that when initial benzene concentration was2.2×10−3 mg L−1, it could be degraded to below safe concentration (1.1×10−4 mg L−1) after 50 h when temperature was 20°C, but it just needed 30 h at 35°C. When light intensity was 6750 Lx, it needed 30 h for benzene to be degraded to below safe concentration, but benzene could barely be degraded without light. When relative humidity was 50%, benzene could be degraded to1.0×10−4 mg L−1after 30 h, while its concentration could be reduced to7.0×10−5 mg L−1at the relative humidity of 80%.

Survival of Endocronartium harknessii teliospores in a simulated airborne state

1989 ◽  
Vol 67 (3) ◽  
pp. 928-932 ◽  
Author(s):  
Kan-Fa Chang ◽  
P. V. Blenis
Keyword(s):  
Relative Humidity ◽  
Liquid Nitrogen ◽  
Long Distance ◽  
Spider Webs ◽  
Considerable Potential ◽  
Good Ability ◽  
Endocronartium Harknessii ◽  
Spore Longevity ◽  
Effects Of Temperature ◽  
Increasing Temperature

The effects of temperature and relative humidity (RH) on the survival of Endocronartium harknessii teliospores and the longevity of these spores out of doors during daylight hours were studied. In one experiment, fresh and liquid-nitrogen-stored spores of E. harknessii were impacted onto spider webs or plastic threads and incubated in darkness at temperatures of 6, 15, and 24 °C and RHs of 39 and 98%. Survival was measured after 1, 2, 4, 8, and 16 days. Spore longevity decreased with increasing temperature and was lower at 98 than at 39% RH. In a second experiment, spores were impacted onto spider webs and placed out of doors on clear days. Viability decreased linearly with time and averaged 33% after 12 h. The data suggest that E. harknessii has relatively good ability to survive in an airborne state and thus would have considerable potential for long distance spread.

scholarly journals Evaluation of the AMPS Boundary Layer Simulations on the Ross Ice Shelf, Antarctica, with Unmanned Aircraft Observations

2017 ◽  
Vol 56 (8) ◽  
pp. 2239-2258 ◽  
Author(s):  
Jonathan D. Wille ◽  
David H. Bromwich ◽  
John J. Cassano ◽  
Melissa A. Nigro ◽  
Marian E. Mateling ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Wind Speed ◽  
Relative Humidity ◽  
High Wind ◽  
Ice Shelf ◽  
High Wind Speed ◽  
Near Surface ◽  
Ross Ice Shelf ◽  
Low Cloud ◽  
The Antarctic

AbstractAccurately predicting moisture and stability in the Antarctic planetary boundary layer (PBL) is essential for low-cloud forecasts, especially when Antarctic forecasters often use relative humidity as a proxy for cloud cover. These forecasters typically rely on the Antarctic Mesoscale Prediction System (AMPS) Polar Weather Research and Forecasting (Polar WRF) Model for high-resolution forecasts. To complement the PBL observations from the 30-m Alexander Tall Tower! (ATT) on the Ross Ice Shelf as discussed in a recent paper by Wille and coworkers, a field campaign was conducted at the ATT site from 13 to 26 January 2014 using Small Unmanned Meteorological Observer (SUMO) aerial systems to collect PBL data. The 3-km-resolution AMPS forecast output is combined with the global European Centre for Medium-Range Weather Forecasts interim reanalysis (ERAI), SUMO flights, and ATT data to describe atmospheric conditions on the Ross Ice Shelf. The SUMO comparison showed that AMPS had an average 2–3 m s−1 high wind speed bias from the near surface to 600 m, which led to excessive mechanical mixing and reduced stability in the PBL. As discussed in previous Polar WRF studies, the Mellor–Yamada–Janjić PBL scheme is likely responsible for the high wind speed bias. The SUMO comparison also showed a near-surface 10–15-percentage-point dry relative humidity bias in AMPS that increased to a 25–30-percentage-point deficit from 200 to 400 m above the surface. A large dry bias at these critical heights for aircraft operations implies poor AMPS low-cloud forecasts. The ERAI showed that the katabatic flow from the Transantarctic Mountains is unrealistically dry in AMPS.

Statistical Analysis of Weather Effects on PM2.5

2012 ◽  
Vol 610-613 ◽  
pp. 1033-1040
Author(s):  
Wei Dai ◽  
Jia Qi Gao ◽  
Bo Wang ◽  
Feng Ouyang
Keyword(s):  
Statistical Analysis ◽  
Wind Speed ◽  
Relative Humidity ◽  
Statistical Methods ◽  
Predictive Analytics ◽  
Hypothesis Test ◽  
Meteorological Data ◽  
Weather Conditions ◽  
Statistical Distribution ◽  
Weather Effects

Effects of weather conditions including temperature, relative humidity, wind speed, wind and direction on PM2.5 were studied using statistical methods. PM2.5 samples were collected during the summer and the winter in a suburb of Shenzhen. Then, correlations, hypothesis test and statistical distribution of PM2.5 and meteorological data were analyzed with IBM SPSS predictive analytics software. Seasonal and daily variations of PM2.5 have been found and these mainly resulted from the weather effects.

Sign in / Sign up

Export Citation Format

Share Document