Constraining numerical models with geomechanical data and microseismic fault-plane solutions

Author(s):  
C.F. Connors ◽  
T.I. Urbancic ◽  
W.F. Bawden ◽  
R.P. Young
2021 ◽  
Author(s):  
Andreea Craiu ◽  
Marius Craiu ◽  
Mariu Mihai ◽  
Elena Manea ◽  
Alexandru Marmureanu

<p>The Vrancea zone is an unique area with both crustal and intermediate-depth seismic activity and constitutes one of the most active seismic area in Europe.  An intense and persistent seismicity is generated between 60 and 180 km depth, within a relic slab sinking nearly vertical in the Earth’s mantle due to the increasing of the stress state within this volume. At intermediate-depths, large magnitude events are frequent, i.e. four earthquakes with moment magnitudes (Mw) >7 occurred in the last century. An unique slab geometry, likely preserved until the present, causes stress localization due to the slab bending and subsequent stress release resulting in large mantle earthquakes in the region.</p><p>In this study, we evaluate the current stress field along the Vrancea subcrustal region by computing the fault plane solutions of 422 seismic events since January 2005. The continuous development of the National Seismic Network allows us to constrain the fault plane solutions and subsequently to evaluate the current stress field.</p><p>The main style of faulting for Vrancea subcrustal events presents a predominant reverse one, with two main earthquakes categories: the first one with the nodal planes oriented NE-SW parallel with the Carpathian Arc and the second one with the nodal planes oriented NW-SE perpendicular on the Carpathian Arc. The main axis of the moment tensor may indicate a predominant compressional stress field (Tpl>45<sup>0</sup> Ppl<45<sup>0</sup>). Another characteristic of  the Vrancea subcrustal zone is the tendency of the extension axis T to be almost vertical and the compression axis P being almost horizontal.</p><p>The results of stress inversion indicate a dominant reverse faulting style, with an average stress regime index of 2.9. Other tectonic regimes were observed in the present dataset as normal and strike-slip but they are retrieved for a restrained number of events.</p><p>The stress patterns obtained from formal stress inversion of focal mechanism solutions reveal many features of the current stress field that were not captured by large-scale numerical models.</p>


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Brijesh K. Bansal ◽  
Kapil Mohan ◽  
Mithila Verma ◽  
Anup K. Sutar

AbstractDelhi region in northern India experiences frequent shaking due to both far-field and near-field earthquakes from the Himalayan and local sources, respectively. The recent M3.5 and M3.4 earthquakes of 12th April 2020 and 10th May 2020 respectively in northeast Delhi and M4.4 earthquake of 29th May 2020 near Rohtak (~ 50 km west of Delhi), followed by more than a dozen aftershocks, created panic in this densely populated habitat. The past seismic history and the current activity emphasize the need to revisit the subsurface structural setting and its association with the seismicity of the region. Fault plane solutions are determined using data collected from a dense network in Delhi region. The strain energy released in the last two decades is also estimated to understand the subsurface structural environment. Based on fault plane solutions, together with information obtained from strain energy estimates and the available geophysical and geological studies, it is inferred that the Delhi region is sitting on two contrasting structural environments: reverse faulting in the west and normal faulting in the east, separated by the NE-SW trending Delhi Hardwar Ridge/Mahendragarh-Dehradun Fault (DHR-MDF). The WNW-ESE trending Delhi Sargoda Ridge (DSR), which intersects DHR-MDF in the west, is inferred as a thrust fault. The transfer of stress from the interaction zone of DHR-MDF and DSR to nearby smaller faults could further contribute to the scattered shallow seismicity in Delhi region.


1970 ◽  
Vol 60 (5) ◽  
pp. 1669-1699 ◽  
Author(s):  
Leonardo Seeber ◽  
Muawia Barazangi ◽  
Ali Nowroozi

Abstract This paper demonstrates that high-gain, high-frequency portable seismographs operated for short intervals can provide unique data on the details of the current tectonic activity in a very small area. Five high-frequency, high-gain seismographs were operated at 25 sites along the coast of northern California during the summer of 1968. Eighty per cent of 160 microearthquakes located in the Cape Mendocino area occurred at depths between 15 and 35 km in a well-defined, horizontal seismic layer. These depths are significantly greater than those reported for other areas along the San Andreas fault system in California. Many of the earthquakes of the Cape Mendocino area occurred in sequences that have approximately the same magnitude versus length of faulting characteristics as other California earthquakes. Consistent first-motion directions are recorded from microearthquakes located within suitably chosen subdivisions of the active area. Composite fault plane solutions indicate that right-lateral movement prevails on strike-slip faults that radiate from Cape Mendocino northwest toward the Gorda basin. This is evidence that the Gorda basin is undergoing internal deformation. Inland, east of Cape Mendocino, a significant component of thrust faulting prevails for all the composite fault plane solutions. Thrusting is predominant in the fault plane solution of the June 26 1968 earthquake located along the Gorda escarpement. In general, the pattern of slip is consistent with a north-south crustal shortening. The Gorda escarpment, the Mattole River Valley, and the 1906 fault break northwest of Shelter Cove define a sharp bend that forms a possible connection between the Mendocino escarpment and the San Andreas fault. The distribution of hypocenters, relative travel times of P waves, and focal mechanisms strongly indicate that the above three features are surface expressions of an important structural boundary. The sharp bend in this boundary, which is concave toward the southwest, would tend to lock the dextral slip along the San Andreas fault and thus cause the regional north-south compression observed at Cape Mendocino. The above conclusions support the hypothesis that dextral strike-slip motion along the San Andreas fault is currently being taken up by slip along the Mendocino escarpment as well as by slip along northwest trending faults in the Gorda basin.


1976 ◽  
Vol 66 (6) ◽  
pp. 1931-1952
Author(s):  
Donald J. Stierman ◽  
William L. Ellsworth

abstract The ML 6.0 Point Mugu, California earthquake of February 21, 1973 and its aftershocks occurred within the complex fault system that bounds the southern front of the Transverse Ranges province of southern California. P-wave fault plane solutions for 51 events include reverse, strike slip and normal faulting mechanisms, indicating complex deformation within the 10-km broad fault zone. Hypocenters of 141 aftershocks fail to delineate any single fault plane clearly associated with the main shock rupture. Most aftershocks cluster in a region 5 km in diameter centered 5 km from the main shock hypocenter and well beyond the extent of fault rupture estimated from analysis of body-wave radiation. Strain release within the imbricate fault zone was controlled by slip on preexisting planes of weakness under the influence of a NE-SW compressive stress.


1980 ◽  
Vol 70 (6) ◽  
pp. 2291-2293
Author(s):  
H. M. Merghelani ◽  
S. K. Gallanthine

abstract During the course of a seismic refraction investigation in Saudi Arabia, an unexpected high level of microearthquake activity was detected near the border of the Red Sea and near the transition from oceanic to continental crust. The data is not adequate to determine fault plane solutions nor to relate the earthquakes to specific structures, but the existence of microearthquakes at this location suggest that there is a significant level of tectonic activity at a point 200 km from an axial trough of the Red Sea. These data, combined with other recent geological observations, may be an important clue to the understanding of continental rifting. The data suggest the need for a more thorough investigation of the earthquake hazard along the shores of the Red Sea.


1974 ◽  
Vol 64 (1) ◽  
pp. 279-283
Author(s):  
John Whitney ◽  
Ronald Merrill

1983 ◽  
Vol 73 (3) ◽  
pp. 813-829
Author(s):  
P. Yi-Fa Huang ◽  
N. N. Biswas

abstract This paper describes the characteristics of the Rampart seismic zone by means of the aftershock sequence of the Rampart earthquake (ML = 6.8) which occurred in central Alaska on 29 October 1968. The magnitudes of the aftershocks ranged from about 1.6 to 4.4 which yielded a b value of 0.96 ± 0.09. The locations of the aftershocks outline a NNE-SSW trending aftershock zone about 50 km long which coincides with the offset of the Kaltag fault from the Victoria Creek fault. The rupture zone dips steeply (≈80°) to the west and extends from the surface to a depth of about 10 km. Fault plane solutions for a group of selected aftershocks, which occurred over a period of 22 days after the main shock, show simultaneous occurrences of strike-slip and normal faults. A comparison of the trends in seismicity between the neighboring areas shows that the Rampart seismic zone lies outside the area of underthrusting of the lithospheric plate in southcentral and central Alaska. The seismic zone outlined by the aftershock sequence appears to represent the formation of an intraplate fracture caused by regional northwest compression.


2015 ◽  
Vol 58 (2) ◽  
Author(s):  
Manuela Volpe ◽  
Simone Atzori ◽  
Antonio Piersanti ◽  
Daniele Melini

<p>We present a Finite Element inverse analysis of the static deformation field for the M<sub>w</sub>= 6.3, 2009 L’Aquila earthquake, in order to infer the rupture slip distribution on the fault plane. An univocal solution for the rupture slip distribution has not been reached yet with negative impact for reliable hazard scenarios in a densely populated area. In this study, Finite Element computed Green’s functions were implemented in a linear joint inversion scheme of geodetic (GPS and InSAR) and seismological (strong motion) coseismic deformation data. In order to fully exploit the informative power of our dense dataset and to honor the complexities of the real Earth, we implemented an optimized source model, represented by a fault plane subdivided in variable size patches, embedded in a high-resolution realistic three-dimensional model of the Apenninic seismo-tectonic setting, accounting for topographic reliefs and rheological heterogeneities deduced from local tomography. We infer that the investigated inversion domain contains two minima configurations in the solution space, i.e. a single- and a double-patch slip distribution, which are almost equivalent, so that the available datasets and numerical models are not able to univocally discriminate between them. Nevertheless our findings suggest that a two high-slip patch pattern is slightly favoured.</p>


Sign in / Sign up

Export Citation Format

Share Document