Self-assembly of bioinspired catecholic cyclodextrin TiO2 heterosupramolecule with high adsorption capacity and efficient visible-light photoactivity

2014 ◽  
Vol 148-149 ◽  
pp. 243-249 ◽  
Author(s):  
Zixin Yang ◽  
Xu Zhang ◽  
Jie Cui
Keyword(s):  
Visible Light ◽  
Adsorption Capacity ◽  
Self Assembly ◽  
High Adsorption ◽  
High Adsorption Capacity

Self-assembled three-dimensional graphene-based materials for dye adsorption and catalysis

2015 ◽  
Vol 3 (18) ◽  
pp. 10031-10037 ◽  
Author(s):  
Xueping Zhang ◽  
Dong Liu ◽  
Lu Yang ◽  
Limin Zhou ◽  
Tianyan You
Keyword(s):  
Adsorption Capacity ◽  
Self Assembly ◽  
Three Dimensional ◽  
Dye Adsorption ◽  
Reduction Process ◽  
High Adsorption ◽  
Graphene Aerogel ◽  
High Adsorption Capacity ◽  
Self Assembled

Graphene aerogel (GA) fabricated via a simultaneous self-assembly and reduction process showed high adsorption capacity towards dyes.

A three-dimensional nickel-doped reduced graphene oxide composite for selective separation of hemoglobin with a high adsorption capacity

RSC Advances ◽  
2016 ◽  
Vol 6 (61) ◽  
pp. 56278-56286 ◽  
Author(s):  
Lei Chen ◽  
Zhang-Run Xu
Keyword(s):  
Graphene Oxide ◽  
Adsorption Capacity ◽  
Reduced Graphene Oxide ◽  
Self Assembly ◽  
Three Dimensional ◽  
High Adsorption ◽  
Reduced Graphene ◽  
One Step ◽  
Reduced Graphene Oxide Aerogel ◽  
High Adsorption Capacity

A 3D nickel-doped reduced graphene oxide aerogel was prepared by one-step reduction and self-assembly, which exhibited favorable selectivity and high adsorption capacity for isolating hemoglobin.

Mercury Removal from Wastewater by Steamed Hoof Powder

1999 ◽  
Vol 40 (7) ◽  
pp. 109-116 ◽  
Author(s):  
M. H. Ansari ◽  
A. M. Deshkar ◽  
P. S. Kelkar ◽  
D. M. Dharmadhikari ◽  
M. Z. Hasan ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Adsorption Capacity ◽  
Adsorption Process ◽  
Adsorption Equilibrium ◽  
Light Metal ◽  
Mercury Removal ◽  
High Adsorption ◽  
Surface Sites ◽  
Ph Values ◽  
High Adsorption Capacity

Steamed Hoof Powder (SHP), size < 53μ, was observed to have high adsorption capacity for Hg(II) with >95% removal from a solution containing 100 mg/L of Hg(II) with only 0.1% (W/V) concentration of SHP. The SHP has good settling properties and gives clear and odour free effluent. Studies indicate that pH values between 2 and 10 have no effect on the adsorption of Hg(II) on SHP. Light metal ions like Na+, K+, Ca2+ and Mg2+ up to concentrations of 500 mg/L and heavy metals like Cu2+, Zn2+, Cd2+, Co2+, Pb2+, Ni2+, Mn2+, Cr3+, Cr6+, Fe2+ and Fe3+ up to concentrations of 100 mg/L do not interfere with the adsorption process. Anions like sulphate, acetate and phosphate up to concentrations of 200 mg/L do not interfere. Chloride interferes in the adsorption process when Hg(II) concentration is above 9.7 mg/L. The adsorption equilibrium was established within two hours. Studies indicate that adsorption occurs on the surface sites of the adsorbent.

scholarly journals Effective Poly (Cyclotriphosphazene-Co-4,4′-Sulfonyldiphenol)@rGO Sheets for Tetracycline Adsorption: Fabrication, Characterization, Adsorption Kinetics and Thermodynamics

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1540
Author(s):  
Muhammad Ahmad ◽  
Tehseen Nawaz ◽  
Mohammad Mujahid Alam ◽  
Yasir Abbas ◽  
Shafqat Ali ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Surface Area ◽  
High Surface ◽  
High Surface Area ◽  
High Adsorption ◽  
Clean Environment ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model ◽  
High Adsorption Capacity ◽  
Adsorption Equilibrium Data

The development of excellent drug adsorbents and clarifying the interaction mechanisms between adsorbents and adsorbates are greatly desired for a clean environment. Herein, we report that a reduced graphene oxide modified sheeted polyphosphazene (rGO/poly (cyclotriphosphazene-co-4,4′-sulfonyldiphenol)) defined as PZS on rGO was used to remove the tetracycline (TC) drug from an aqueous solution. Compared to PZS microspheres, the adsorption capacity of sheeted PZS@rGO exhibited a high adsorption capacity of 496 mg/g. The adsorption equilibrium data well obeyed the Langmuir isotherm model, and the kinetics isotherm was fitted to the pseudo-second-order model. Thermodynamic analysis showed that the adsorption of TC was an exothermic, spontaneous process. Furthermore, we highlighted the importance of the surface modification of PZS by the introduction of rGO, which tremendously increased the surface area necessary for high adsorption. Along with high surface area, electrostatic attractions, H-bonding, π-π stacking and Lewis acid-base interactions were involved in the high adsorption capacity of PZS@rGO. Furthermore, we also proposed the mechanism of TC adsorption via PZS@rGO.

Sign in / Sign up

Export Citation Format

Share Document