Acoustic characterization of damage and healing of microencapsulation-based self-healing cement matrices

Steel slag is the by-product of the steelmaking industry, the negative influences of which prompt more investigation into the recycling methods of steel slag. The purpose of this study is to characterize steel slag filler and study its feasibility of replacing limestone filler in asphalt concrete by evaluating the resistance of asphalt mastic under various aging methods. Firstly, steel slag filler, limestone filler, virgin asphalt, steel slag filler asphalt mastic and limestone filler asphalt mastic were prepared. Subsequently, particle size distribution, surface characterization and pore characterization of the fillers were evaluated. Finally, rheological property, self-healing property and chemical functional groups of the asphalt mastics with various aging methods were tested via dynamic shear rheometer and Fourier transform infrared spectrometer. The results show that there are similar particle size distributions, however, different surface characterization and pore characterization in the fillers. The analysis to asphalt mastics demonstrates how the addition of steel slag filler contributes to the resistance of asphalt mastic under the environment of acid and alkaline but is harmful under UV radiation especially. In addition, the pore structure in steel slag filler should be a potential explanation for the changing resistance of the asphalt mastics. In conclusion, steel slag filler is suggested to replace limestone filler under the environment of acid and alkaline, and environmental factor should be taken into consideration when steel slag filler is applied to replace natural fillers in asphalt mastic.

Download Full-text

Low temperature acoustic characterization of PMN single crystal

Journal of Applied Physics ◽

10.1063/1.5000361 ◽

2017 ◽

Vol 122 (8) ◽

pp. 084103 ◽

Cited By ~ 1

Author(s):

E. Smirnova ◽

A. Sotnikov ◽

S. Ktitorov ◽

H. Schmidt

Keyword(s):

Low Temperature ◽

Single Crystal ◽

Acoustic Characterization

Download Full-text

Acoustic characterization of silica nanoparticle-impregnated Kevlar fabric

Textile Research Journal ◽

10.1177/00405175211023812 ◽

2021 ◽

pp. 004051752110238

Author(s):

Oluwafemi P Akinmolayan ◽

James M Manimala

Keyword(s):

Transmission Loss ◽

Silica Nanoparticle ◽

Air Gap ◽

Thin Plates ◽

Residual Porosity ◽

Ballistic Performance ◽

Number Of Layers ◽

Structural Applications ◽

Acoustic Characterization

Silica nanoparticle-impregnated Kevlar (SNK) fabric has better specific ballistic performance in comparison to its neat counterparts. For multifunctional structural applications using lightweight composites, combining this improved ballistic functionality with an acoustic functionality is desirable. In this study, acoustic characterization of neat and SNK samples is conducted using the normal-incidence impedance tube method. Both the absorption coefficient and transmission loss (TL) are measured in the 60–6000 Hz frequency range. The influence of parameters such as number of layers of neat or treated fabric, percentage by weight of nanoparticle addition, spacing between fabric layers, and residual porosity is examined. It is found that while absorption decreases with an increase in nanoparticle addition for frequencies above about 2500 Hz, increasing the number of layers shifts peak absorption to lower frequencies. By introducing an air-gap behind the fabric layer, dominant low-frequency (1000–3000 Hz) absorption peaks are obtained that correlate well with natural modes of mass-equivalent thin plates. Examining the influence of residual porosity by laminating the SNK samples reveals that it contributes to about 30–50% of the total absorption. Above about 1500 Hz, 3–5 dB of TL increase is obtained for SNK samples vis-à-vis the neat samples. TL is found to increase beyond that of the neat sample above a threshold frequency when an air-gap is introduced between two SNK layers. With an increase in the weight of nanoparticle addition, measured TL tends to be closer to mass law predictions. This study demonstrates that SNK fabric could provide improved acoustic performance in addition to its ballistic capabilities, making it suitable for multifunctional applications and could form the basis for the development of simplified models to predict the structural acoustic response of such nanoparticle–fabric composites.

Download Full-text

Acoustic Characterization of Some Steel Industry Waste Materials

Applied Sciences ◽

10.3390/app11135924 ◽

2021 ◽

Vol 11 (13) ◽

pp. 5924

Author(s):

Elisa Levi ◽

Simona Sgarbi ◽

Edoardo Alessio Piana

Keyword(s):

Thermal Characteristic ◽

Environmental Benefits ◽

Acoustic Properties ◽

Physical Parameters ◽

Industry Waste ◽

Acoustic Characterization ◽

Minimization Procedure ◽

The Difference ◽

By Products

From a circular economy perspective, the acoustic characterization of steelwork by-products is a topic worth investigating, especially because little or no literature can be found on this subject. The possibility to reuse and add value to a large amount of this kind of waste material can lead to significant economic and environmental benefits. Once properly analyzed and optimized, these by-products can become a valuable alternative to conventional materials for noise control applications. The main acoustic properties of these materials can be investigated by means of a four-microphone impedance tube. Through an inverse technique, it is then possible to derive some non-acoustic properties of interest, useful to physically characterize the structure of the materials. The inverse method adopted in this paper is founded on the Johnson–Champoux–Allard model and uses a standard minimization procedure based on the difference between the sound absorption coefficients obtained experimentally and predicted by the Johnson–Champoux–Allard model. The results obtained are consistent with other literature data for similar materials. The knowledge of the physical parameters retrieved applying this technique (porosity, airflow resistivity, tortuosity, viscous and thermal characteristic length) is fundamental for the acoustic optimization of the porous materials in the case of future applications.

Download Full-text