Biochar derived from spent mushroom substrate reduced N2O emissions with lower water content but increased CH4 emissions under flooded condition from fertilized soils in Camellia oleifera plantations

Chemosphere ◽  
2022 ◽  
Vol 287 ◽  
pp. 132110
Author(s):  
Xintong Xu ◽  
Xi Yuan ◽  
Qiang Zhang ◽  
Qixuan Wei ◽  
Xiaojun Liu ◽  
...  
2013 ◽  
Vol 3 (1) ◽  
pp. 45-50
Author(s):  
Dwi Dian Praptanto ◽  
Kurnia Herlina Dewi ◽  
Bosman Sidebang

The purpose of this study is to examine the effect of drying time in weight and water content, combination effect of drying time and size of the material, and consumer acceptance to the product in the wet processing of chili blocks production. Method used in the research is completely randomized design (CRD) with two factorials are material size and drying time. Data were analyzed using ANOVA and further analysis using DMRT at 5% significance level. Organoleptic test result was analyzed using the Kruskal-Wallis and Tukey test for further analysis. Application of the equal drying time to two different size of material: rough and finest block chili, showed the result that water content of the rough block chili is lower than the finest block chilli. Application of the different drying time duration to the same size of chili showed the lower water content with increasing duration of drying time. The water content of the material tends to decrease with increasing duration of drying time. The level of consumer’s preferences to the product of wet processing of chili blocks production is equal for scents, but it’s different for color, texture and overall preferences.


1979 ◽  
Vol 57 (19) ◽  
pp. 1994-1998 ◽  
Author(s):  
Peter L. Tobiessen ◽  
Nancy G. Slack ◽  
Keith A. Mott

The response of photosynthesis and respiration to drying was measured in four species of epiphytic mosses, Ulota crispa (Hedw.) Brid., Neckera pennata Hedw., Anomodon rugellii (C. Mull.) Keissl., and Plagiomnium cuspidatum (Hedw.) T. Kop., from habitats along a desiccation gradient. There was little difference among the mosses in these responses. The relationship of water content to water potential did differ among the mosses, with Plagiomnium, the facultative epiphyte, showing a typical response of more mesic species and the other three showing a more xeric response, i.e., water potential does not begin to fall steeply until a lower water content is reached in Ulota, Neckera, and Anomodon. Both photosynthesis and respiration in all four moss species were quite sensitive to moderate water stress.


2016 ◽  
Vol 20 (1) ◽  
pp. 109-123 ◽  
Author(s):  
M. M. R. Jahangir ◽  
K. G. Richards ◽  
M. G. Healy ◽  
L. Gill ◽  
C. Müller ◽  
...  

Abstract. The removal efficiency of carbon (C) and nitrogen (N) in constructed wetlands (CWs) is very inconsistent and frequently does not reveal whether the removal processes are due to physical attenuation or whether the different species have been transformed to other reactive forms. Previous research on nutrient removal in CWs did not consider the dynamics of pollution swapping (the increase of one pollutant as a result of a measure introduced to reduce a different pollutant) driven by transformational processes within and around the system. This paper aims to address this knowledge gap by reviewing the biogeochemical dynamics and fate of C and N in CWs and their potential impact on the environment, and by presenting novel ways in which these knowledge gaps may be eliminated. Nutrient removal in CWs varies with the type of CW, vegetation, climate, season, geographical region, and management practices. Horizontal flow CWs tend to have good nitrate (NO3−) removal, as they provide good conditions for denitrification, but cannot remove ammonium (NH4+) due to limited ability to nitrify NH4+. Vertical flow CWs have good NH4+ removal, but their denitrification ability is low. Surface flow CWs decrease nitrous oxide (N2O) emissions but increase methane (CH4) emissions; subsurface flow CWs increase N2O and carbon dioxide (CO2) emissions, but decrease CH4 emissions. Mixed species of vegetation perform better than monocultures in increasing C and N removal and decreasing greenhouse gas (GHG) emissions, but empirical evidence is still scarce. Lower hydraulic loadings with higher hydraulic retention times enhance nutrient removal, but more empirical evidence is required to determine an optimum design. A conceptual model highlighting the current state of knowledge is presented and experimental work that should be undertaken to address knowledge gaps across CWs, vegetation and wastewater types, hydraulic loading rates and regimes, and retention times, is suggested. We recommend that further research on process-based C and N removal and on the balancing of end products into reactive and benign forms is critical to the assessment of the environmental performance of CWs.


Author(s):  
I. V. Alexeenko

The results of comparative study of productivity and some parameters of water metabolism of primocane raspberry varieties in the conditions of Bryansk region are presented. The purpose of the work was to evaluate drought-resistance of original varieties and select on her basis the most valuable genotypes. There were studied 8 primocane raspberry varieties: Bryanskoe divo, Karamelka, Podarok Kashinu, Snezhet, Pingvin, Poklon Kazakovu, Oranzhevoe chudo and Rubinovoe ozherelye. In laboratory conditions, an evaluation was made of the total water content, water deficit, and water holding capacity of the leaves during critical periods of plant water availability. It was established that the greatest amount of water in the leaves (65.63 %) is contained in the phenophase “intensive growth”; less-in the phenophase “budding” (60.73 %), even lower water content – in the phenophase “fruiting” (58.02 %).The water deficit decreased on vegetation phases, but at the same time he was on average level (11,42-16.68 %). The leaves of raspberry varieties Podarok Kashinu and Poklon Kazakovu marked a low level of water deficiency in the phenophase “fruiting” (9.2-9.8 %). The water-holding ability increased on vegetation phases. Among the studied assortment, the leaves of the varieties Poklon Kazakovu and Podarok Kashinu relatively slowly lost water after 4 hours of wilting (water loss 19.35-26.86 %). The yield data of raspberry varieties in drought conditions are presented. The varieties Poklon Kazakovu and Podarok Kashinu have been characterized by a relatively great yield. On the basis of the study of productivity and water metabolism parameters, relatively drought-resistant primocane raspberry varieties were identified: Poklon Kazakovu and Podarok Kashinu.


Water ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 2169 ◽  
Author(s):  
Tabassum Abbasi ◽  
Tasneem Abbasi ◽  
Chirchom Luithui ◽  
Shahid Abbas Abbasi

Paddy fields, which are shallow man-made wetlands, are estimated to be responsible for ~11% of the total methane emissions attributed to anthropogenic sources. The role of water use in driving these emissions, and the apportioning of the emissions to individual countries engaged in paddy cultivation, are aspects that have been mired in controversy and disagreement. This is largely due to the fact that methane (CH4) emissions not only change with the cultivar type but also regions, climate, soil type, soil conditions, manner of irrigation, type and quantity of fertilizer added—to name a few. The factors which can influence these aspects also encompass a wide range, and have origins in causes which can be physical, chemical, biological, and combinations of these. Exceedingly complex feedback mechanisms, exerting different magnitudes and types of influences on CH4 emissions under different conditions, are operative. Similar is the case of nitrous oxide (N2O); indeed, the present level of understanding of the factors which influence the quantum of its emission is still more patchy. This makes it difficult to even understand precisely the role of the myriad factors, less so model them. The challenge is made even more daunting by the fact that accurate and precise data on most of these aspects is lacking. This makes it nearly impossible to develop analytical models linking causes with effects vis a vis CH4 and N2O emissions from paddy fields. For situations like this the bioinspired artificial intelligence technique of artificial neural network (ANN), which can model a phenomenon on the basis of past data and without the explicit understanding of the mechanism phenomena, may prove useful. However, no such model for CH4 or N2O has been developed so far. Hence the present work was undertaken. It describes ANN-based models developed by us to predict CH4 and N2O emissions using soil characteristics, fertilizer inputs, and rice cultivar yield as inputs. Upon testing the predictive ability of the models with sets of data not used in model development, it was seen that there was excellent agreement between model forecasts and experimental findings, leading to correlations coefficients of 0.991 and 0.96, and root mean square error (RMSE) of 11.17 and 261.3, respectively, for CH4 and N2O emissions. Thus, the models can be used to estimate CH4 and N2O emissions from all those continuously flooded paddy wetlands for which data on total organic carbon, soil electrical conductivity, applied nitrogen, phosphorous and potassium, NPK, and grain yield is available.


Soil Research ◽  
1998 ◽  
Vol 36 (6) ◽  
pp. 899 ◽  
Author(s):  
D. P. C. Stewart ◽  
K. C. Cameron ◽  
I. S. Cornforth ◽  
J. R. Sedcole

A 2-year field trial determined the influence of applying spent mushroom substrate (SMS) on soil physical properties and the growth of 4 consecutive vegetable crops (sweetcorn, cabbage, potato, cabbage). Treatments comprised 0, 20, 40, and 80 t/ha of moist SMS, both with and without inorganic fertiliser, applied to each crop, giving a range of SMS rates up to 320 t/ha. SMS improved the environment for plant root growth by decreasing soil bulk density (by 0· 05-0·25 g/cm 3 at 100 mm depth), increasing aggregate stability (by 13-16%), reducing clod and surface crust formation (by 16-31 and 18-94%, respectively), increasing the infiltration rate (by 130-207 mm/h), increasing the water content of the soil (by 0-7% w/w), and reducing diurnal temperature changes. Some of these changes were not evident until repeated applications of 80 t/ha SMS had been made. Soil physical properties were related to crop yield, and soil physical properties’ principal components were related to crop principal components using regression analysis (r2 of 0·20-0·60 and 0·16-0·54, respectively). The soil physical properties that had the most influence on plant growth were specific to each crop and included bulk density, water content, surface crust cover, infiltration rate, and aggregate size distribution. Soil physical properties had a large influence on the potato yield irrespective of fertiliser use and on both cabbage crop yields when fertiliser was not used, but not on the sweetcorn yield (the first crop to be grown). The effect of changing soil physical properties on plant growth was most apparent when fertiliser was not used. This was because the improved physical properties increased plant yield (at least in part) because of increased plant nutrient uptake.


2020 ◽  
Vol 263 ◽  
pp. 114477 ◽  
Author(s):  
Xintong Xu ◽  
Chang He ◽  
Xi Yuan ◽  
Qiang Zhang ◽  
Shuli Wang ◽  
...  

2015 ◽  
Vol 1088 ◽  
pp. 101-106
Author(s):  
Jing Chen ◽  
Qian Cheng ◽  
Shun Quan Chen

A new fluorinated acrylate terpolymer hydrophobic polymer was prepared by emulsifier-free inverse microemulsion polymerization using methyl methacrylate (MMA) and hexafluorobutyl acrylate (HFBA) as monomers, and methyl polyethylene glycol methacrylate (MPEGMA) as polymerizable emulsifier. Membrane properties were characterized by means of FT-IR, SEM and Contact Angle Meter. The effect of fluorinated monomer content, water content in the inverse precursor microemulsion on the surface morphologies and hydrophobicity of the polymer film was mainly discussed. Morphological studies of the fluorinated polyacrylate polymers by SEM showed that discrete granular microstructures were obtained from precursor microemulsion with higher water content. On the other hand, smooth and continuous surface morphologies were found with lower water content. Contact angle revealed that the fluorine preferentially enriched at the film-air interface and more hydrophobic that the film-glass interface. The amount of HFBA had significantly effects on the film properties. The water contact angle of the film-air interface increased as the amount of HFBA increased from 0 ml to 4 ml and then remained almost unchangeable. The film formed from the fluorinated polyacrylate polymer with higher water content in the precursor microemulsion exhibited better hydrophobicity in comparison with the film formed from the fluorinated polyacrylate polymer with the lower water content, and it confirmed that rough surface have high water contact angles.


2016 ◽  
Vol 2016 ◽  
pp. 1-7 ◽  
Author(s):  
Tatiana Aguirre Calvo ◽  
Patricio Santagapita

Alginate hydrogels are suitable for the encapsulation of a great variety of biomolecules. Several alternatives to the conventional alginate formulation are being studied for a broad range of biotechnological applications; among them the addition of sugars and biopolymers arises as a good and economic strategy. Sugars (trehalose and β-cyclodextrin), a cationic biopolymer (chitosan), an anionic biopolymer (pectin), and neutral gums (Arabic, guar, espina corona, and vinal gums) provided different characteristics to the beads. Here we discuss the influence of beads composition on several physicochemical properties, such as size and shape, analyzed through digital image analysis besides both water content and activity. The results showed that the addition of a second biopolymer, β-CD, or trehalose provoked more compact beads, but the fact that they were compact not necessarily implies a concomitant increase in their circularity. Espina corona beads showed the highest circularity value, being useful for applications which require a controlled and high circularity, assuring quality control. Beads with trehalose showed lower water content than the rest of the system, followed by those containing galactomannans (espina corona, vinal, and guar gums), revealing polymer structure effects. A complete characterization of the beads was performed by FT-IR, assigning the characteristics bands to each individual component.


1989 ◽  
Vol 54 (1) ◽  
pp. 266-276 ◽  
Author(s):  
Václav Čeřovský ◽  
Karel Martinek

The effect of water content on free chymotrypsin-catalyzed reaction of Ac-Tyr-OEt with HBr.Gly-NH2 in triethylamine-containing 2-propanol was studied. Maximum yield of dipeptide Ac-Tyr-Gly-NH2 was obtained in 2-propanol with 2% of water. Lower water content retards the reaction. Although higher water content accellerates the process, the yield of the dipeptide is reduced by enzymatically catalyzed hydrolysis of Ac-Tyr-OEt. The studied reaction proceeds analogously also in other aliphatic alcohols woth low content of water except in methanol; it does not take place in dimethylformamide or dimethyl sulfoxide containing 2% or 20% of water. In 2-propanol with 2% or 5% of water, syntheses of the protected amino-terminal oxytocine and vasopressin tripeptide, as well as other model peptides, were studied. In all the described experiments, α-chymotrypsin without any stabilization or immobilization was employed.


Sign in / Sign up

Export Citation Format

Share Document